Glass blocks for partitions. Decorative glass blocks: sizes, price

Modern building materials have various advantages. However, there are products that do not lose their importance over time. For example, glass blocks for partitions continue to be in demand, as they are very beautiful and have a lot of other advantages. About this and other features of the material presented, you can learn from this article.

What is the product?

Glass blocks for partitions are special elements of different shapes and colors, made of natural raw materials. They have excellent technical characteristics that allow them to build walls or create other interior elements. They are made of industrial glass blocks, which often have a green tint. Naturally, the color can be different. In addition, you have the opportunity to purchase transparent items.

Also you can choose different block sizes. The functions of this material can also be different. For example, they can transmit light, scatter or direct it. Modern glass blocks for partitions can have a decorative pattern, have some kind of texture or pattern. Now consider all the advantages of the material.

Block advantages

Naturally, the presented products have certain advantages. Among them you can name these:

- Reliability and durability. It will be difficult to break such a partition.

- The ability to transmit light.

- Resistance to moisture, temperature drop, rotting, insect damage, fire. And also glass blocks for partitions are inert to chemical substances, therefore it is possible to wash them by any means.

- Impossibility of dust penetration inside the unit.

- Beautiful design. In this case, the blocks fit into any interior and do not require additional finishing.

- Wide choice of shapes and sizes.

- Possibility of different combinations of blocks.

- Excellent noise absorption, as well as good heat and sound insulation.

- Ecological cleanliness.

Disadvantages of the material

Glass blocks, the price of which is acceptable even for a person with an average income, also have some disadvantages:

1. You can not hammer nails in them to hang something. Although this fastening element can be replaced by conventional suction cups.

2. If you are going to use the material presented as windows, then note that there will be no air circulation in this case.

3. You can not cut glass blocks, the price of which varies from 2 to 13 dollars per piece and more.

4. Inside such walls you can not lay wiring or other communications.

Naturally, for the construction of partitions, these shortcomings are not so important. And the benefits are much greater.

Where is the material applied?

Glass blocks, the sizes of which can be different, are used everywhere. And they can be stacked both in private houses and in industrial buildings. For example, you have the opportunity to use such products in garages or utility rooms for window decoration. They will miss enough light. However, in this case, you should take care of additional ventilation of the room.

Often, such blocks are used to erect partitions in apartments. For example, the perfect solution will be a similar wall in the bathroom. It not only helps to make your apartment original, but will divide the room into zones. In addition, in the bathroom, such a partition will perfectly hide you during showering or other hygiene procedures.

With such walls you can divide a large room into several small parts, separate yourself a place that is necessary for work. In this case, no one will interfere with you. In principle, the scope of such materials is quite extensive.

Technical characteristics of the material

Among the features that manufacturers declare, we can distinguish the following:

1. Fire safety.

2. Wide range of temperatures at which you can apply this material (from -40 to +50 degrees and above).

3. Weight: from 2.5 to 4.3 kg.

4. Dimensions: usually 19x19x8 cm and 24x24x8 cm. But there are other options.

5. Resistance to heat transfer: 0.43 m ² x ^° C / W.

Glass blocks, the size of which allows you to build a partition of any size, are a remarkable decorative material that does not lose popularity.

Features of the material and its use

You can apply this product not only for the construction of partitions, but also for the decoration of ceilings, columns and other parts of the room. Also, you can build a winter garden, a greenhouse or other utility rooms from blocks, for which a large amount of light is required and energy is saved.

Bricks made of glass can be used for the construction of load-bearing structures. The seams of masonry can be reinforced. But this should be done only if the blocks are only fragments of the wall.

Decorative glass blocks are produced both in our country and abroad. Naturally, their cost differs. The shape of the products may be angular or end. In addition, in the modern market are sold columns of glass.

Decorative glass blocks not only decorate the room. They contribute to the conservation of energy in the building. The fact is that inside each element there is a vacuum space.

How to choose the right material?

Glass blocks in the apartment - this is an excellent decorative solution that will make your home beautiful and original. However, to achieve this effect, the material presented should be selected correctly. There is a list of criteria that will help you decide:

- The size and shape of the elements. It all depends on what you want to mount.

- Appearance. Here, too, everything depends on the decorative solution. That is, the blocks can have a different color and texture. The main thing is that the constructed structure should fit in the overall interior.

- The cost of the material. In some cases this factor is decisive. However, you should not always choose the cheapest option.

- Quality. There is already need to pay attention to the manufacturer. It should have good user feedback. In addition, the blocks must have accompanying documents, which indicate all their characteristics. Do not buy items in stores that refuse to show you a quality certificate.

What are the ways of laying the elements?

Before you begin the installation of glass blocks, you must choose the method of joining the products. There are several of them:

1. With glue. This method is rather difficult and takes a lot of time. In addition, for masonry you will need special glue, which should also be able to use. In this case, the installation of glass blocks is carried out in the same way as the laying of bricks. Vertical sutures then expand.

2. Using a solution. There is already need to use water. This method is associated with various inconveniences: you need to use crosses to fix the distances between the elements, you need maximum accuracy during operation. In addition, in this case reinforcing rods should be used to strengthen the structure. Especially if the wall has a semicircular shape.

3. Without solution. This method is the easiest, fastest and most accurate. In this case, the stacking of glass blocks is done using special frame modular systems, which are made of wood or plastic. This method allows you to change items in places if necessary.

What tools and materials are needed for the job?

Since to date, the first two methods of laying are used very often, we will consider them. To work in this case, you will need the following:

- Glass blocks.

- Construction level and plumb line.

- Putty knife.

- Metal profiles.

- Glue or mortar.

- Capacity for fixing mixture preparation.

- Electrodrill with a special nozzle for mixing glue or mortar.

- Wet sponge.

These tools are enough, even if you have never done such a thing. Stacking of glass blocks can be made independently. However, if you are not sure of your abilities, do not try.

Stacking technology

A very important part of your apartment is the bathroom. Glass blocks help to make it more original and functional, because with their help you can divide the room into zones. You can implement the masonry yourself. The whole process is as follows:

1. Preparation of the place. It should be cleaned of dust and debris. It is also required to measure the glass blocks and draw a diagram of their placement. To do this, you need to use a tape measure. Next, follow the intended scheme, which will help you to perform all the actions correctly and consistently.

2. Do not remove the protective film from the elements in advance. This is done only after installation.

3. Now prepare the mortar or glue. Next, make a solution pad. On it you will lay the first layer of blocks. In order for it to come out even, stretch the horizontal cord (look at the level).

4. Begin the first row from the corner. In order for the seams to be even, use special crosses. The excess solution should be cleaned immediately. Vertical seams should also be densely filled with the mixture.

5. Masonry must be reinforced with steel reinforcement, which is pre-painted in production. It has a thickness of at least 8 mm. It should be laid in horizontal seams. For each row, 1 or 2 bars are used. In this case, the reinforcement must go into the walls at least 2 cm. This will strengthen the glass partition.

6. When the rows are stacked, remove the crosses. Wipe seams until the solution is wet. To do this, use a grout for the tile. Note that the solution should not get on the front of the glass. If this does happen, try to wash it off with water as soon as possible with a soft cloth.

7. Please note, since glass does not have a very good adhesion to cement, do not stack more than three rows of blocks at a time.

During the robot should take into account some rules. For example, try to knead such a solution, which will not contain large grains of sand. The partition must be fixed by other materials: wood, plastic, metal or a wall into which it is embedded.

How to replace a broken element?

Glass blocks "Wave" - a very beautiful decorative solution not only for bathrooms, but also for other rooms. However, it happens that for some reason one or more elements are damaged or even broken. Naturally, they should be replaced. To do this, you need to make some manipulations:

1. Eliminate the block. To do this, make thin holes in the solution, which fixes it. Please note that you must not damage the fitting.

2. Clean the hole of cement residues and dust.

3. Install the new item. To do this, apply a small layer of solution to the bottom of the hole and carefully place the block there. Then gently pound the mixture into the vertical seams and the top of the element. In the lateral orifices, the solution must be rammed gradually using a wooden block. Next, align and wipe the new seam so that it does not differ from the others. After this, allow it to dry well. Excess solution is better immediately removed with a damp cloth.

That's all the features of using blocks of glass. Good luck!