What is the blacksmith's paint. Features and shades

Forge blacksmith is a special enamel or color composition used for metal forged elements, which are widespread. These are the details of the garden exterior (fences, staircases, grilles on windows and gates) and products used in the interior (stands, fireplaces, furniture and decorative elements).

Paint Features

Such compositions provide protection of forged products from corrosion. The most widespread is the liquid plastic "Nerzhaplast" and the decorative composition "Moloteks", which has a hammer effect.

Blacksmith paints "Patina" allow not to doubt their quality. They are distributed on surfaces pre-cleaned of existing rust, salts and fat deposits. In the composition there are special additives, thanks to which the physical and operational characteristics are significantly increased.

Paint forge "Prestige" is used for finishing products made by the method of casting, stamping and forging of non-ferrous metals, steel, metal and cast iron, the operation of which is intended both inside and outside the premises, subject to significant temperature changes and high humidity. It is also possible to use concrete and wooden elements for decorative coating.

Black graphite blacksmith paint differs in constant popularity. The secret of such demand lies in the vast possibilities of application and excellent covering characteristics. Graphite shine is the ideal base for any patina tone.

Shades

Coatings made of acrylic binders can be used without preliminary treatment of planes. With the help of them, it is possible to create a metallic effect, as well as a matte or rough surface. Gold and silver shades are most often used for artificial aging of objects. But only their choice is not limited, there is the possibility of creating violet, blue or bronze elements.

Forging paints are characterized by the presence of lamellar additives, providing protection from negative influences and creating excellent adhesion to prepared surfaces.

Benefits

With the help of such tools, in addition to anti-corrosion protection, it is possible to apply to structures that have a complicated profile. Are not an exception and dimensional elements.

Among the advantages of such compositions it is worth noting the following:

• Wide textured assortment - antique, hammered, glossy and others;
• Distinctive decorative characteristics;
• Low consumption of material;
• A sufficient degree of adhesion to metal structures and elements;
• No need to use specialized equipment for rapid drying;
• Use, transport and storage at a negative temperature;
• Anti-corrosion protection.

Paint blacksmith: application

Before use, thorough mixing and stirring of the mass is required. It is applied in several layers, each of which is dried for 2-3 hours. The quality of the final coating is affected by a variety of conditions, including ambient temperature, pour conditions, layer thickness.

Forging paints are applied with the help of several techniques, it can be pneumatic or airless spraying, application of standard methods in the form of a brush and a roller. Of particular importance is the preparation of the surface before work. It must be pre-degreased and dried, with an optimum indicator of the surrounding humidity is 75-80%.

The strip technique of applying with the help of a standard brush is optimal for seams, edges, places with complicated access and irregularities. At full drying it takes at least 24 hours, in case the ambient temperature is about 20 degrees. At its other values, and also depending on the quality of the composition, the pour time can vary. That is why it is advisable to purchase coatings in a proven specialized store.

Storage and safety regulations

Forge black paint is characterized by the presence of organic volatile solvents. Working with it requires compliance with established rules and regulations. It is recommended to be outdoors or to use forced ventilation during application. After complete hardening, the enamel film is fire-safe and does not have an effect on the human body.

After completion of the finishing works, in case there are remains of paint, they should be in a closed container. Used rags, waste and spoiled materials are disposed of in non-flammable containers in designated areas.

Transportation and storage are possible in the temperature range from +30 to -45 ° C, in the absence of direct exposure to sunlight and the proximity of heating devices.