Door arch of plasterboard with their own hands

Updating your home often leads to radical change. One of these innovations is resorted more often - it is a replacement of doors to the arch or the creation of a new entrance.

Why is the arch often used for repair?

Arched vaults add elegance to the apartment in which they are installed. In addition, the door arch keeps the area in small rooms, which is usually occupied for closing and opening the door. Do not forget that the vaults of any shape look good only in rooms with high ceilings. So the arch in the doorway in a room with a ceiling height of less than 2.6 meters will be an unfortunate element. The best option is with the distance between the floor and the lintel opening at a rate of 2.5 meters. If during the repair the entrance is transferred, then a new doorway should be created above the usual one to create a full arch arch. Many try to make repairs in the apartment on their own, but they can not understand how the door arch is created with their own hands . But the sequence of processes and materials for repair are quite simple.

Choose the shape and design

Arched vaults are divided into several basic types:

1. A classic design that uses one regular radial arc.
2. In the Art Nouveau style, the arch has an elliptical shape of the arch.
3. Design in a romantic style, which is formed from a complex mixture of rounded and straight elements that create a uniform shape.
4. The door arch in the Gothic image has strict rectangular forms.
5. In the hi-tech style, asymmetric irregular shapes are used, in which one side of the opening can be round, the other - rectangular or in the form of a wavy line.

The choice of form depends largely on the overall design of the apartment and the height of the ceilings, but the space for the manifestation of fantasy in this case has no limits.

How to create arched openings?

When creating archways, you can use two simple methods:

1. Hollow out the wall in accordance with the previously completed project.
2. Seal the upper part of the existing doorway to form the arch.

Vydalklivanie used for doorways in oversized rooms with a pronounced decorative function. The door arch is created the right shape directly in the wall according to the drawing.

In the second case, sheets of particleboard or plasterboard are used, with which the passage is sewn and a certain shape is created. Such interior elements can be done on their own.

Application for the construction of an arched gypsum cardboard opening is preferable because of the ease of use and its extensive capabilities. The second way to create an artificial arch is the most accessible for independent work.

How to create an arch of plasterboard?

Door arch of plasterboard is created by implementing simple actions. The first thing to do is measure the doorway. Its width and height are measured from the floor. The finished door arch will reduce from 0.1 m to 0.15 m the height of the passage. The width of the arc is determined by the size of the opening. This value, divided in half, is required to make the right semicircle. An essential circumstance is the homogeneity of the thickness of the walls, verified vertical and horizontal passage. If they are not strictly vertical, then it will be necessary to make a fit using putty or plaster.

Creating the front of the arch

In order for the arch in the doorway to have an ideally correct shape, it is necessary to pay close attention to the calculation of its front part. The difficulty is that you need to make two exactly the same pattern. For this, a pencil is used, to which the thread of the required length is tied. For marking, you must remember the previously measured width of the opening, divided in half. This value will be the necessary radius of the circle. For example, if the width of the pass is 1 meter, then the radius of the circle is 0.5 meters. On one side of the drywall, which will be in the upper part of the arch vault, you need to measure 0.6 m and draw a line.

The calculation is carried out as follows: 0.5 +0.1 = 0.6 m. Thus, 0.10 m is the distance from the upper part of the doorway at the highest point of the arch structure. The total size of plasterboard in width should be 1 meter. Then denote the center of the cut sheet at a distance of 0.50 m from any edge. Now we need a pencil with a rope, which measures 0.5 m from the marked center and delineates the semicircle. If the measurements are made correctly, a smooth semicircle is formed. Further on the received marking the semicircle is cut out. As a result, we obtain a rectangle with a cutout in the form of a semicircle 1 m wide, 0.6 m high, and the height of its narrowest point should be 0.1 m.

Creating the main frame for the arch

To create the main frame for the arch, you need to make a metal profile. For accuracy, you need to measure two guides about 1 meter long. They must be attached to both sides of the opening in a parallel position to each other. The fastening is carried out with the help of rifled screws or screws, depending on the structure of the wall. It is necessary to attach two parts of the frame on either side of the door in length by 0.6 m. For this, curved structures of the guide profile 300x200 mm are used. To close the lower end surface of the vault, make a frame, to which will be attached a curved strip. The used metal profile is given an arc-shaped shape with the help of metal scissors. Profile is cut from two sides. Moving clockwise, it is necessary to make cuts every 4-5 cm. The strip prepared in this way is attached to the edge in a semicircle. On the other hand, another similarly prepared profile is attached. To ensure that the door arch of gypsum board has a stable and sturdy construction, crossbeams are inserted between these profiles, which are fixed in the arch frame with screws with a press washer. Transverse inserts can be made from profile debris.

Installation of drywall in the archway

To install prepared parts from gypsum board they must bend. To do this, moisten a moistened sponge with one side of the prepared strips and treat them with a needle roller, but do not press strongly. Then carefully bend the workpiece, leaning on the smooth wall of the sheet drywall. After the part is bent, you can proceed to installation in the arch vault. Drywall is carefully attached to the frame. When the arch in the doorway is finally inserted and fixed to the perforated corner, it is necessary to prime it. After complete drying of the soil, plastering, painting or wallpapering is done. The installation of the door arch is an opportunity to emphasize the individual image of your apartment.

Little tricks

Door arches from plasterboard require the purchase of a special arched gypsum cardboard that has a smaller thickness - 6.5 mm, a higher quality cardboard and reinforcement with fiberglass for flexibility.

Arched frames of traditional forms of hard plastic can be bought ready-made kits.

If you plan to backlight, then the light is pushed in the stage of fixing the frame, but it is better to use light-emitting ribbons instead of light bulbs.

Adding arched door arches as an architectural element requires a certain talent in design and building skills. Door arch of plasterboard with their own hands - a wonderful element of interior design.