Where do I start to glue the wallpaper in the room? Recommendations of specialists

Unfortunately, many people who decide to make repairs themselves and save on the services of professional workers face a lot of problems. One of the most common stumbling blocks is the question of where to start gluing the wallpaper. How to properly perform this step, you will learn from today's article.

Variety of assortments

Before starting to repair, you must select and purchase all necessary materials. A wide range of products is presented in the modern construction market. Therefore, anyone who is interested in where to start gluing wallpaper in the room, does not hurt to deal with the existing species.

One of the most popular is relatively cheap paper coating. This environmentally friendly material has a high air permeability. Its cost largely depends on the quality of the paper taken as a basis. Such wallpaper easily absorb foreign odors and quickly become soiled, so they are not recommended for use in finishing kitchens and bathrooms.

Not less popular managed to win vinyl wallpaper, produced on paper or non-woven basis, coated with polyvinyl chloride. They are immune to moisture and are resistant to mechanical damage. In addition, this material almost does not absorb odors and dust.

The next popular wall coating is non-woven wallpaper. It is worth noting that their characteristics are about the same as those of paper analogues. But in appearance they are more like fabric. The most important advantages of this material include strength and resistance to deformation.

In addition to the above varieties, on sale you can find metalized and liquid wallpaper. The first are rich in texture and resistant to mechanical damage. The second is more like ordinary plaster.

List of necessary materials and tools

Before you figure out how to properly start to glue wallpaper in the room, you need to prepare everything you need to carry out the work. Typically, the standard set includes such tools:

• Rubber roller.
• Scissors or clerical knife.
• Capacity for preparation of glue.
• Putty knife.

In addition, you need to take care in advance to have at hand such devices as a tape measure, a plumb line, a brush and a simple pencil.

The existing alternative

Those who want to understand where to start gluing wallpaper in the room, it will be interesting to learn about the existence of several different ways. To date, only three known options are known: wallpapering wallpaper from door jambs, from a corner or from a window. It is recommended to start from the place where, as you think, the wallpaper will be glued strictly vertically. Each of these methods has undeniable advantages, which we will discuss below.

Why and where do I start to glue the wallpaper in the room?

First of all, it is necessary to prepare the room for repair. At this stage, you should get rid of the remnants of the previous coating, align and primer the walls. Those who plan to glue the wallpaper overlap, you can advise starting from the window. This is one of the easiest ways to hide the formed seams.

Before cutting the panel, you need to measure height. This can be done using a tape measure or a centimeter tape. Experts recommend making a small stock. Then the prepared cloth is coated with glue and left to impregnate. If the instruction provides for the application of the composition on the wall, then dry surface is applied to the smeared surface.

Selecting the start angle or line

It's time to consider where to start gluing the wallpaper in the room. Those who decided to do this from a corner, will have to pre-level the walls. In this case, they need to be brought almost to the ideal state. Particular attention will need to be given to the corners. It should be understood that this is a rather difficult task, which only a highly qualified specialist can cope with.

Those who are not yet confident in their abilities, and are considering where to start gluing wallpaper in the room, you can try to do this from the doorway. However, even in such cases, verticality must be strictly observed. Follow the implementation of this requirement by using a plumb line. The most important thing is to properly glue the first painting. Then you can act in the direction you are planning.

Those who do not fit any of the previous options and who can not decide where to start gluing wallpaper in the room, you can advise starting from several lines. This method is advisable to use only in the case of a large number of windows and other obstacles. In such situations, many joints are formed that need to be hidden.

How to withstand the vertical at uneven angles?

Those who need to join the ornament with the main glued canvas, it is possible to recommend each time using a new vertical line in the course of the work. As a result, the last canvas, pasted on any of the walls, will go around the corner of the next couple of centimeters.

Such joining will allow to achieve a more neat and aesthetic appearance. However, this technique is suitable only for thin wallpaper. Thick it is desirable to withdraw into a vertical line, cutting off the setting edge.

Where do I start to glue the non-woven wallpaper in the room?

According to most experienced masters, this is best done from the corner. To get the ideal joint, you need to measure the distance equal to the width of the panel on the wall and draw a vertical line. Then, coat the coating with pre-diluted glue. This can be done with a roller or brush. It is important to purchase a special glue in advance, which contains components that prevent the appearance of the fungus. The choice of composition is especially important if the repair is done in rooms with a high level of humidity.

After this, the canvas must be applied strictly according to the markings made and carefully smoothed out with a clean soft cloth or special tool. It is important to ensure that no bubbles form during the work. All unnecessary need to be tightly pressed with a spatula and cut with a knife.

Each subsequent canvas must be glued to the back, not forgetting the combination of the ornament. Formed joints should be thoroughly ironed with a special roller. One of the most problematic places is the same angles. That's why they need to pay special attention. To get rid of wrinkles, you can make small incisions through which the air will escape.