Useful tips: how to cut a ceramic tile and how

Ornaments and bizarre patterns of ceramic tiles today no one surprises. But sometimes I want to create myself, but do not hire professionals, I want to put my whole soul into work. And then the question arises as to what to cut ceramic tile, and how to do it correctly. The need for this will definitely arise during the repair. After all, the tiles should be placed on large areas, on different surfaces, at unequal angles.

Than to cut a ceramic tile?

The first thing that comes to mind is the glass cutter. This tool is useful for performing works that are small in volume. And also if you need to quickly cut the tile. But large volumes of work glass cutters are not subject to control. After all, the use of this tool requires utmost care and concentration. It will take all the time to ensure that the incision is in the right place. On a kitchen scale it will be difficult to do all this. How to cut? Tiles should be on a firm, level surface. Now you can roll the glass cutter, directing it "on yourself." The pressing should be evenly. As a result, a visible strip will remain on the surface. You only need to break the tile.

If the question of what to cut ceramic tile, is still not exhausted for you, try one of the varieties of tile cutters. It can also be used for large amounts of work. And you practically do not expend effort. The tile cutter can be electric and manual. The latter is considered by many to be the most convenient and simple device. But the manual tile cutter will not cut the strip, the thickness of which does not exceed 6 millimeters: the edges will be uneven. But if you need to cut the whole into parts larger ones - this is an ideal option. The electric model will speed up the process as much as possible. It makes it possible to get thin strips, and figured patterns, and so on. One of the advantages of this tile cutting machine is that the work is clean, because all the particles and dust settle in a special tank of water.

How to cut ceramic tiles with tiles? Consider a manual device. The tile is attached inside it. You must keep it on the same level and move the wheel "from yourself" to the edge. Spread the pressure evenly. But if you press hard, the tile can crack. At the end, you need to press the handle of the device. As a result, the tile breaks evenly. The electric model should be used approximately by the same principle.

Than to cut a ceramic tile still? You can Bulgar. This device combines the advantages of the two above described "brethren" for their intended use. The cutting speed will be high, but it is very easy to apply. How to cut ceramic tiles with a Bulgarian, even an inexperienced repairman will understand. However, the Bulgar has disadvantages. The cut edge often turns out uneven and needs to be processed. In addition, you are waiting for a huge amount of dust. Always wear glasses and a respirator. And how to cut a tile with a ceramic grinder? The mechanism of action is similar to a glass cutter. Plug the device into the socket, press the "Start" button. When the disk has reached a sufficient speed, get to work. You need to move "from yourself." Here it is necessary to be extremely attentive. Because of one awkward movement, you can lose a pair of fingers.

Thus, the cutting of ceramic tiles by force to everyone. You just need a suitable tool and a little skill.