Insulated linoleum: description, types, manufacturers and reviews

In order to get a warm floor indoors, it is not necessary to purchase complex and expensive materials and heating systems. Among the assortment of warm coatings, there are more affordable ones. A special place in this category is insulated linoleum.

Why choose a warm coat

Popularity among consumers and the first positions in the market of this floor covering are provided with operational characteristics, simplicity of laying and general availability. Typically, the question of using this type of flooring occurs when there is a need for quality, fast and not so expensive to insulate floors. This material can be laid on any surface of concrete or wood, but it is recommended to comply with certain requirements imposed on the substrate.

Warm linoleum is divided into two types, one of them is made on a warm basis, and the other is made as a warmed covering. Between them there are very important differences not only in the structure of the canvas, but also in qualitative characteristics.

Description of the main types of insulated linoleum: foam-based material

Insulated linoleum can be produced on a foamed basis. It is used when there is a need to insulate floors without additional costs. Especially often such a coating is used when necessary to cover the concrete base, and in fact it is rather cold. Used such a linoleum for a wooden surface.

These types of linoleum have a significant thickness, so their use is justified when the roughing surface does not have an ideal evenness, has elevations and cracks, and there is no time to eliminate them. Insulated linoleum on foamed basis has a rather complex structure. For example, the top layer is a decorative surface that can have any color. On sale you can find a similar material that will have a special pattern and texture, it can be traditional and avant-garde options. The pattern is formed over the entire thickness of the layer, which ensures the preservation of an attractive appearance for a long time.

The next layer that goes below is foamed rubber. It has excellent noise-absorbing and heat-insulating properties. The thickness of this layer is not so great: from 1.5 to 3 mm. However, this does not at all indicate that the effectiveness will not be the same as we would like. In some cases, for additional rigidity, one more layer is added, which is made of fiberglass.

A wear-resistant transparent film is applied above, which is designed to protect the linoleum from mechanical damage, among other things, it eliminates the penetration of contaminants inside the structure. This flooring is not only practical, but also easy to care for, it is easy to wash, and its strength is at a height.

Description of linoleum on a warm basis

If you are interested in insulated linoleum, then you should pay attention to the material, which is made on a warm basis. It is a film that is glued to the base of felt or jute during the manufacturing process. Such a coating is soft and elastic, it is pleasant to walk on it. To lay this coating is quite simple, since it does not require the need for labor-intensive gluing on the black base. However, there are also drawbacks, which are expressed in the fact that the top layer is not distinguished by its impressive strength. Therefore, the material can be easily damaged, and in the process of operation it presupposes the need for careful treatment of oneself.

In those places where there is a high traffic, such a cover can quickly lose its attractiveness. In addition, linoleum on insulated basis can not be used in rooms with high humidity, because under the influence of water, the base can simply collapse, especially with regard to natural materials. But in the children's room or bedroom, such coverage will be appropriate.

Reviews on the choice of insulated linoleum

If you decide to purchase linoleum on a warm basis, then consumers recommend adhering to the general recommendations that apply to this type of flooring. Thus, for rooms with high humidity conditions, linoleum on jute or felt basis is not suitable. But in those places where a high load on the floor surface is possible, it will be better to feel the linoleum on a foamed basis.

Choosing the material for different rooms, you should pay attention to the patterns and colors that should be combined. Consumers advise to prefer that covering material, the width of which will allow it to be laid with fewer joints. Before buying it is important to pay attention to the class of wear resistance, on which the durability of the product will depend.

Reviews of linoleum on a felt basis

Linoleum thick insulated can be made on a felt basis. As claimed by manufacturers, it consists of two layers, the lower one of which is made of an antiseptic gasket. The upper layer is made of a polyvinyl chloride film. In order to lay this material, the substrate is recommended to be cleaned of debris and dust. The rough surface must be firm and even.

Experts argue that it is important to exclude the absorption of moisture by the fibrous part of the material. To do this, it is important to make sure that the moisture content of the substrate does not exceed 5%. To do this, it is recommended to use a small piece of glass, which is laid on the surface and remains for 2 days. If after this time on the inner surface of the glass you have noticed traces of moisture, then the base is not suitable for laying the felt base, since a similar linoleum can simply begin to decay after a while. If you do not dry the surface properly, then in the future it will cause additional costs. In this case, it is necessary to conduct surface treatment with special solutions that prevent the spread of mold.

Linoleum of different manufacturers: Tarkett material

If you are interested in the material described, then you can pay attention to the insulated linoleum "Tarkett", which is made more than 120 years. During this time, the company has established itself as a manufacturer of durable and safe solutions for the floors. Today, Tarkett is the number one brand in Russia, this rank distinguishes it among analogous manufacturers of floor coverings. This linoleum insulated, the price of which starts from 196 rubles. Per square meter, is ready to serve more than 10 years with proper installation. It belongs to the KM5 class of fire safety.

Linoleum of the company "Komiteks Lin Parma"

Warming the floor with linoleum can be done with the material from the manufacturer "Komiteks Lin Parma", which offers its products from 181 rubles. Per square meter. This material has a protective layer, the thickness of which is 0.15 mm. Coverage refers to the class G4 for flammability.

As a protective layer, fiberglass is used, and the abrasion is 35 g / m ² . According to the tests, the change in linear dimensions may be 0.2%. The manufacturer indicates that the service life of the material reaches 20 years. This linoleum insulated, the price of which is acceptable for the average consumer, has the quality of moisture resistance and can be used for warm floors.

Laying of thermal insulation under linoleum

Quite often, home masters are wondering how to insulate the floor under linoleum. In order to exclude moisture absorption by the material, it is necessary to lay a waterproofing film on the concrete covering, for this purpose simple polyethylene is suitable. Over the film linoleum is laid, and the joints are glued with building tape. If you want to additionally insulate the concrete surface, then the substrate must first be applied heat-insulating paint, it will act as a liquid heat insulation. After its application, you must wait for the complete drying, and on top of it lay the plywood, which will stretch linoleum.

Conclusion

For effective insulation of the floors, you can use one of the above types of linoleum. It will achieve high aesthetic properties of the coating and practicality of the surface.