How to glue a paper wallpaper

How to glue paper wallpaper, in fact, few know. We'll talk about this in this article. What do you need to take into account and what rules to observe?

The first step is to study the features of the product that you liked in the store. Usual this wallpaper, or maybe a paper wallpaper for painting? Remember that each label has a label that specifies the specific characteristics: dimensions, thickness, material, etc. Also, for each type of wallpaper, there is a certain type of glue that will be used in the future. Buying rolls, it is necessary to take care of it immediately: it is easier to make in the same store. You will be consulted about this by the sellers, and then you will not have to find the right adhesive yourself.

How to glue a paper wallpaper

Before paving, prepare the working area. Remove the old wallpaper so that the entire surface of the walls is clean. Never paste new ones on old ones.

Paper wallpaper for walls first cut into the same length of the canvas, if they do not have a special pattern, which must be customized. The length is calculated taking into account the allowance of 10 to 15 cm - it is better to cut off the residue after gluing, than later to see that the cloth is short. If there is a picture, then it needs to be adjusted, and special markings printed by the manufacturer on the roll with Reverse side. The cut pieces are stacked on top of each other, but in small piles, so that they are not damaged by friction.

To wallpaper do not fall behind the wall, it is important to use glue correctly. For each type there is a kind of glue. In this case, it is necessary to strictly follow the instructions for use: dilute it in certain proportions, allow the required amount of time to infuse and apply a certain layer. To glue with glue you need not only wallpaper, but also the wall itself. When gluing it is important to carefully press the paper cloth. From the glue, the paper component can swell and the wallpaper will become less durable, so there is a risk of rupture. Press the air bubbles with a roller, while moving in the same direction, for example, from top to bottom.

How to glue paper wallpapers - special recommendations of specialists

Starting should, according to professionals, from the top corner. At the same time, do not lap or glue to the corner. It is enough to retreat a small distance from the corner, draw a line with a pencil, using the level, and follow the marked area. Seams should be applied butt to each other. It will be more convenient if you glue the wallpaper two people. One of them will hold the lower edge of the canvas and combine with the vertical seam of the already pasted wallpaper of the wallpaper.

It is important that the glue does not get on the front of the wallpaper. If this happens, you should immediately remove it with a damp warm cloth. When the wallpaper is glued to the wall, their excess is cut off by a ruler. It is important to take into account that there will be a skirting board below, and the wallpaper should be at least 5 mm behind it. It will be better to remove the skirting board before gluing the paper wallpaper.

If the wall has sockets, switches or other items that can not be removed in advance, the streaks are glued directly over them. Do not try to calculate and cut the wallpaper in advance, otherwise the cuttings may not coincide. When you put the canvas on the wall, then you can gently cut through the places where the rosette is located, etc. But this must be done before the glue dries. Because if the rosette protrudes from the wall, then the wallpaper because of it will lie flat and move around the edges. When you cut a place under the socket, the wallpaper will be pressed tight against the wall and you can smooth them out by driving out all the air bubbles.