Than to wash off a mounting foam

Than to wash off a mounting foam? This question is more like a cry of the soul. Many remember how in the process of repair had to work with this material. It is very corrosive, and it is sometimes not possible to wash it off from the body, clothes or furniture. This article will help you easily cope with this task, if necessary.

Before you know the answer to the question of how to clean the mounting foam, it is worth talking about precautions that will help to avoid contamination. Always work only in work clothes, and protect your hands with rubber gloves. You should also close all the surfaces in the house, which can get the mounting foam completely by accident. You can paste a paper tape, spread the paper, use old rags, after all. These precautions can save you from the problems that will be described below.

Than to wash off a mounting foam if pollution to avoid it was not possible? Unfortunately, even precautionary measures can not protect you from a substandard product. Foam in this case can be hard to freeze and drain on unclosed surfaces, for example, on the door leaf when it is frozen. There have been occasions when a layman tried to open a balloon with a knife, as a result of which he simply exploded, polluting everything around him. And those who are interested in what to wash the mounting foam from their hands, should know that the special tools created for this are sometimes able to leave chemical burns.

Please note that fresh foam, as a rule, can be washed off. But with frozen things are not so good. Therefore, experts give the main advice: as soon as the foam gets on clothes, furniture or your hands, immediately deal with its removal. This can be done with a knife, just scrape it off.

A damaged area should be wiped with a special remedy, for example, "Fenozol". Then you should rinse this area with a clean cloth, using a soapy solution. This is necessary in order to remove chemicals that are part of special equipment. They often have a negative effect on the surface.

Than to wash off a mounting foam if it has already dried up? Do it really only mechanically, that is, scrape off with a knife, using an abrasive material. And what if the damaged surface is sensitive? Let's say it's a laminate. It will simply be spoiled, no polish will be able to restore it. There is an interesting way - use the medicine "Dimexide". It is sold in all pharmacies, and you can easily give it without a prescription. Be careful, this medicine is able to be absorbed through your skin, work with it solely in rubber gloves. So, than to wash the mounting foam from the laminate and other sensitive surfaces? You need to scrape it with a knife. Do not touch the surface itself, then moisten it with Dimexide. After a while, the remaining foam will soften, you can easily remove it with a sharp knife.

When removing foam from various surfaces, never use acetone or a solvent. She will only get deeper absorbed.

And than to wipe off the mounting foam from your hands? Use the "Reiniger" tool. It is actually bought in a construction shop. After use, use a regular nourishing cream. Do not use chemically active substances. So not for long and get a burn of your hands . And here's another way: get on the skin mounting foam remove with a dry cloth, and when its remains dry, take a hot bath. You will steam the skin and the foam will come off by itself.

As for fabrics, the answer to the question, what to wash the mounting foam, in this case is not too optimistic. Remove it from clothing is usually not completely possible.

So, useful advice you received. Now it remains to be done so that to use them in practice it was necessary as rarely as possible.