Interesting and useful homemade for home

Nothing brings joy to the house like a thing created by one's own hands. And it's true, different homemade products for the house not only fill the life with bright colors, but also give the interior a uniqueness and a certain zest. And it's impossible to forget about such a thing (let it be a little trinket). And it's not so important that it's homemade woodwork for home, paper or plasticine. The options and ways of making different things are millions, and today we will consider several of them. So, how do you make interesting homemade for home?

Shelf of tin cans

It would seem, such a trifle - a jar of coffee. However, even from it you can make a beautiful, convenient and useful shelf for storing household things. Often in such containers store various souvenirs and memorable photos. Practical benefits from this homemade little, but these jars look very harmonious.

Details about the order of making this craft

1. First in the jars a drill or a special knife-ripper punches holes (in the upper and lower - for 3, and in the walls of all the rest - 2 points).

2. Then the jars are fastened together. As fasteners, nuts and screws of small dimensions are used. By the way, to obtain the desired (beautiful) result, you will need to have at least 5-6 such jars.

3. Afterwards, a hole for screws is punched in the tanks. In the bottom of the jars, located at the top of the structure, 1-2 holes are made to fix the shelf to the wall. Finished homemade screwed screwdriver or screwdriver. Preliminary for this, dowels are driven into the wall.

Everything, now homemade for the house are entered into business. Be sure - the various small things in such jars will not get lost. Thus, you kill two birds with one stone - decorate the interior and get rid of the disorder in the house.

Homemade home decorations - how to make a clock on a CD / DVD?

The clock on the CD-ROM is also a very interesting and original variant of decorating the interior. Apparently, the design of this device is very original, and therefore it will look organically on the backdrop of any interior (perhaps, it's a highlight). Such "smart" homemade products are made for a house in a few minutes. More details about all the stages we'll tell you just below. So, how do you make a homemade watch yourself? To begin with, you will need to prepare the relevant materials - a CD / DVD CD (you can choose the design for your front cover) and a cover for it (the distance between the walls should be at least 0.05 cm). It is very important that the last detail does not have any chips or scratches. To facilitate the work, you can buy a ready-made watch and then simply replace the standard dial.

The mechanism of the watch should be a switch, otherwise it will not work. Also it is necessary to make figures. There should be twelve of them altogether. It can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. As decorations you can use rhinestones. Also, you need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and superglue like "Moment". The main thing of this whole design will be a CD-ROM. We will redesign it first.

First, you need to partition the disk into twelve equal parts and paste the numbers to the marked points. In this case, the sectors should not go beyond the outer diameter of the device. How are homemade products made further? After the sectors we proceed to the clock itself - shoot the arrows and place them exactly in the center of our disk. By the way, before attaching them, you can paste some interesting photo on the disk, which will make the design of the watch even more original. To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue on them and accurately position the part exactly over the entire surface of the guide elements. The same mechanism of arrows is attached to the back of the disk.

What to do next?

So, the clock base is almost ready. The next step will be making holes in the device along the contour of the arrow mechanism. The field of this disk is installed in the case. The mechanism itself is led out through the opening and is tightly closed. Now, with the help of a wire, an emphasis is made, which is glued to the back cover. To make it more durable, glue a piece of cloth or leather over it. This will make the focus not only strong, but also beautiful, since the excess part of the wire is no longer gaping on the clock as before. Everything, self-made watches from a compact disc are successfully made. It only remains to insert the AA battery and set the time. By the way, you can also make a battery with your own hands.

How to make a source of energy from a lemon?

As we know, this fruit contains a lot of acid, respectively, with the right actions, the lemon can be turned into a real mini-battery. Of course, the charge from such a "battery" is not enough for the work of household appliances, but for the functioning of a desktop clock or charging a mobile phone this current is enough.

Doing homemade for home - preparing tools for converting lemon into a source of constant energy

During the work you will need tools such as a knife, a soldering iron, a drill, an iron pin, and also several pieces of copper wire in isolation. Among other items, it should be noted the need for one glass or a glass, a pair of wooden sticks and the same number of clerical buttons. And, of course, the main source of energy we will have a lemon. You can also apply and orange, but the acid in it is much smaller, so the charge from it will be minimal.

Instructions

First you should cut the lemon in half. This is necessary in order for it to give more acid, which is necessary for the current source. Lemon is fixed in a glass so that it does not roll on the table. Further, copper and iron pins are inserted into its pulp along the perimeter at a distance of 0.5-1 centimeter. "Minus" we will have iron, and the "plus" is copper.

To all pins with the help of a soldering iron are attached pieces of wire. They will act as a connector for the power supply. All elements are connected in series.

At the final stage, sticks are inserted into the battery compartment. It is important to observe the polarity. Contacts are pressed against the contact group. The container remains open throughout the process of charging the device.

So, we found out how to make useful homemade things for the house with our own hands. Good luck in your endeavors!