Inspection pit in the garage with their own hands: features of the construction

If you have a car and you are able to repair it yourself, then you need to prepare a special place for it. The made inspection hole in the garage with their own hands in this case will be the best option. The fact is that you can build it to your own plan and equip it the way you want.

Lookout pit in the garage with their own hands is built quickly enough. You need to first calculate what dimensions it will have, and draw its outline on a sheet of paper. Naturally, it is necessary to take into account the depth on which groundwaters are located. The minimum value should be 2.5 m. During construction, pay special attention to the waterproofing of the pit, otherwise the bottom, as well as all the metal parts of your car will be constantly exposed to moisture. The structure should be additionally closed.

The inspection pit in the garage with their own hands is built quickly. Preparation begins with digging. The excavated soil will have to be removed somewhere. The depth should correspond to the growth of the person who will repair the transport. At the same time, another 15 cm should be added. Regarding the width of the structure, it must meet the dimensions of the car. The standard figure is 80 cm. The pit must be located in the middle of the race.

During excavation digging, we should not forget about the allowances (10-15 cm), since inside we will strengthen the pit with brick. The bottom of the trench must necessarily be covered with a thick enough layer of gravel, as well as sand. And the resulting pillow should be well tampered. On the perimeter, you need to excavate drainage trenches, the depth of which is 30 cm. Next to the bottom is laid geotextile, which is covered with a small layer of gravel. Naturally, drain pipes are laid on it.

The made inspection hole in the garage with its own hands provides for additional use of a roll-on waterproofing, which is spread over the prepared pillow and a layer of compacted clay. Now you can put the reinforcement on the floor and pour concrete. Naturally, it must be done according to the level.

Next, we make an observation pit in the garage as follows: we cover the concrete floor with one more layer of waterproofing and start laying out the brick walls. During their installation, you must provide for trench lighting, electricity supply for connecting various devices. In addition, you can equip in the pit additional niches, in which it will be possible to add keys and other tools for the period of repair. In principle, the walls can be poured from concrete, but all the nuances should be taken into account.

The made design should be protected from accidental arrival of the car. To do this, a safety harness (corner) should be installed in front of the trench. In addition, in order to make it convenient for you to go down, build steps that can be poured from concrete.

The installation of a pit in the garage is not a difficult, but a responsible occupation, so first make all the exact calculations and thoroughly prepare for work.