Hole in the stretch ceiling: how to fix it correctly?

Stretch ceiling - a unique finish finish, the cost of which is low, and the result is pleased with its impeccability. Justified is the use of such coatings in new buildings. Since it takes 2-3 years for shrinkage to stop more or less. Cracks appear on painted, gypsum plasterboard ceilings during this period. The hinged remains the same as the new one. But what if there was a hole in the stretch ceiling? How to repair? Photo and instruction - later in this article.

How defects appear

At home, an unplanned hole appears quite unexpectedly from a shot cork of champagne or installation of curtains, ceiling skirting. Well, if there are small children in the family, then it is unlikely that such trouble will be avoided. For once, but it will necessarily arise. In these moments, you should not panic, but rather remember what kind of stretch ceiling (fabric or PVC) is installed, a warranty or not the case, to assess the location of the hole. Another source of trouble may be electricity. Incorrectly made wiring is the cause of the burning out of the ceiling. Placement under heating structures of heating devices, unprotected light sources is the result of black spots and reflow. These troubles can be avoided if the safe placement of electrical appliances is provided, and the installation of the wiring is entrusted to the professional.

Guarantee cases

Sometimes the owners forget that they have concluded a contract for the installation of stretch ceilings, and in it the duties of the parties are prescribed. Often happens that it is the factory marriage, poor-quality installation cause holes in the stretch ceiling. To guarantee cases when it is necessary to apply to the contractor, it is possible to carry:

• Divergence on the seam. In such situations, you should contact the company that was engaged in installation. There is a substandard installation, or a defective sheet is used, an incorrect cutting and a constriction.
• The formation of holes along the perimeter of the walls. This is a consequence of poor-quality installation.

In such situations, a warranty hole appears in the stretch ceiling. How to fix - the question is not yours, but the manufacturer. You can easily apply for the removal of such a marriage.

Non-guaranteed cases

This category includes all the holes caused by your fault. You can solve the problem drastically and replace the entire canvas or show wit and correct the error that appears. It is important to understand from what material the design is executed and the scale of the disaster.

Fabric Ceilings

With such canvases it is easier to work, but there are special features. And if there was a small hole in the stretch ceiling - how to fix it yourself? Let's consider some variants:

• If the hole is small, you can sew and gently paint the seam area with the appropriate color.
• For large holes, a patch is used. And, as in the first variant, it stains. The patch is inserted inside and carefully glued with colorless glue. It is desirable to choose a cloth in the color of the canvas.
• The application or sticker will not only hide the unplanned hole, but also transform the surface.

For such work, the canvas must be dismantled. And the edges of the hole should be fixed with tape prior to repair. If you are not sure that it will be possible to perform repair works qualitatively, it is better to contact the companies specializing in them. They will suggest how to solve the problem, and will carry out the repair of the coating at a professional level.

PVC ceiling - hole near the fasteners

If such a hole was formed in the stretch ceiling, how to fix it? The question is simple enough to solve. If the hole is small and is located at a distance of up to 150 mm from the fastening bars, you can try to tighten the ceiling by removing the hole behind the bar, fix it, cut off excess. But this option is suitable, if the canvas is not initially overstretched during installation:

• Secure the edges of the cut with paint tape. This will prevent further sprawl.
• Remove the fastening strip from the side of the cut.
• Heat the film with a hair dryer and gently pull it to remove the incision.
• Install the fixing plate back.

This is one of the simplest problems when there was a hole in the stretch ceiling. How to repair it, we looked at. And what if the hole appeared far from the wall?

PVC ceiling: a hole far from the wall

In such cases, it is possible to provide the installation of a spot light device:

• Fix the edges of the cut with molar tape.
• Install the reinforcing ring under the additional element. It is installed with a special adhesive for film ceilings.
• In the formed ring make a technical hole for equipment, for example, under a spotlight.
• Install the equipment.

You can install deceptive devices (idle). If you decide to install a functioning one, you will have to partially remove the tensioning cloth in order to bring electrical wiring. But thanks to this there will be an additional light source, and this is also a plus.

PVC ceiling and appliqués

Is it possible to seal a hole in a stretch ceiling in this way? Yes, this is one of the interesting options. In addition to repair, it is also a way to transform the interior, adding a twist.

A decorative patch is acquired, such that it can cut the cut. As a rule, they have a self-adhesive basis. It removes the protective film, and the application is carefully glued and smoothed. It is possible to remove not all the protective film immediately, but as the application is glued. This will help to paste it more evenly without bends.

If the warranty has expired

How can I seal a hole in a stretch ceiling in this case? If the seam is broken, then a complete replacement of the film will help. But if the canvas lags the perimeter of the bar, you can try to eliminate this defect, but first determine what caused this:

• Incorrect cutting, the fabric is stretched. In this case, repairs will not help, you have to order a new ceiling. But it will cost less, because only the canvas will change.
• Low-quality clamping bars. If such a hole is formed in the stretch ceiling, how to fix it yourself? A new profile is bought instead of the old one. The clamping rail is removed. Cloth heated. For this purpose, a thermal gun is better. The ceiling is tightened and fixed with a new bar.

If you are not sure that you can determine the source of troubles and cope with the task, it is better to turn to professionals. They will be able to solve the problem qualitatively.

What defects can not be eliminated?

In some cases, repair the canvas will not make sense. This is if the seam parted and if a hole of more than 200 mm was formed. In the second case, even the installation of a patch or applique will not save, the hole under tension will diverge further. Therefore, the replacement of the canvas can not be avoided. Well, if the seam is broken, then it can not be glued on its own, therefore a complete replacement of the canvas will be required. Since organizations involved in installing ceilings, will not engage in gluing old canvases. This is unpleasant when there is a hole in the stretch ceiling. How to fix a number of holes - we have already considered. But not all troubles can be overcome by yourself, so you should listen to folk wisdom about the mean, who pays twice. When ordering stretch ceilings, attention must be paid to the company's reputation; The materials that it uses; Warranty terms and so on. In the future, this will reduce the risk of appearance in your home of poor-quality ceiling finishing. If your fault is a hole in the stretch ceiling, you can easily fix the problem, guided by this article. In case you are not sure that you will cope and carry out the work, contact the firm that made the installation.

So, we figured out how to fix a hole in the stretch ceiling.