Plank for clamping linoleum joints

The place of docking of sheets of linoleum among themselves, with other kinds of flooring materials, and also open edges it is necessary to fix very well. Otherwise, under the influence of moisture and mechanical loads, they can bully. In the end, such edges are overwritten, dirty and torn - the overall appearance of the beautiful coating spoils. To prevent this, manufacturers of floor coverings have developed special profiles - clamping or docking strips. With the help of these simple devices, the ideal type of coating remains for many years.

What functions does the clamping bar for linoleum

Get an accurate cut to perfectly fit the edges, it is not easy. Especially if the connection is not in a straight line, but repeats a bend. Therefore, the technology of soldering linoleum is not always suitable. If the thickness of the coatings is different, it is also difficult to achieve the accuracy of the seam. In all these and other cases, it is advisable to apply a pressure profile that provides:

• Seam protection. Even with very accurate joining of the sheets of floor covering, there are necessarily areas where there are invisible to the eye slits. In these cracks when cleaning the room, and just in the process of life penetrate moisture and dust. After a couple of years of operation, the black bar at the junction will inevitably appear, and this is not the worst. The joint may diverge under the influence of temperature processes in the coating material itself, and with time the edges will begin to wrap. Plank presser easily solves all these issues. The variety of color and textural options for finishing the presser pins is enormous.
• Alignment levels. For example, when laying tiles, no matter how thin the adhesive layer, the coating thickness of at least 5 mm is guaranteed. Fit the linoleum exactly millimeter to a millimeter - it's a painstaking business. You can, of course, take advantage of heat-insulating substrates, but they have the property of being squeezed, as, indeed, and budgetary flooring material. Visually, this is not too noticeable, but when walking really hooked on this invisible protrusion. The bar again comes to the rescue. Its edges are cut at an angle or are ground.
• Combining different types of coatings. The modern tendency to decorate the floor with several types of material: insert circles, write smooth lines, create whimsical patterns, turn the floor into a real collection of paintings. Here the bar plays the role of a frame to these pictures. Performed in one color, it combines all the diversity into a single form.

Clamping plate: features

Due to the great demand for a variety of finishing materials, several types of clamping bars for different purposes have appeared on the market:

• The bar is straight. The simplest profile for fixing the joint is equal in height to flooring materials. It is stiff, curved at the end or with sides cut off at an angle. This profile has mounting holes and is screwed to the base of the floor.
• The clamping bar is flexible. It is made of elastic plastic and has a guide protrusion from the underside, which should go into the butt gap. The profile is intended for registration of smooth wavy connections of type: linoleum - tile; Linoleum - laminate. Fastening is carried out by means of glue.
• The profile is multilevel. Smoothes the differences in the thickness of different docked materials. Its main task is to make the operation of the coating safe, and also to prevent the destruction of the joint with constant engagement by the objects.
• End profile. Apply to fix the edge of the coating, which ends at the threshold or when you exit the balcony, or in any other place where the continuation of the floor is not expected.
• Angle bracket. Designed for stair flights. There are two types of these profiles. One serves to fix the floor covering, the other has a special ribbed surface to prevent the leg from sliding in the staircase. Sometimes these bars have a special rubber insert.

What do pressure profiles do?

The most practical and widely used is the clamp "Technonikol" made of metal, plastic and rubber.

1. Metal. The material is an aluminum or brass strip. The profile is obtained by the method of milling and drilling. After coating with paint and varnish materials, the bars acquire a different color range. There are monotonous and imitate the structure of wood of different breeds. They are not subject to corrosion and resistant to wiping.
2. Plastic. Cheaper material than metal. Plastic and ideal for closing curved joints. Such a clamping bar requires the use of reliable adhesives, as it is attached to them. It is also produced in various colors, but it is less resistant to mechanical stress and can be easily scratched.
3. Rubber. Used mainly for covering rounded, oval and similar joints, and also as an additional element of metal angular thresholds.

How to properly fix the joint with a bar

To fix the metal clamping bar, it is necessary to have an impact drill, a hammer, a figured screwdriver, a marker, as well as screws and plastic dowels in the required quantity. The installation technology is as follows:

1. The bar is laid on the joint so that a seam can be seen through the fixing holes.
2. A hole is marked with a marker for drilling points.
3. Drill holes for plastic anchors to the depth of the latter.
4. Insert the dowels.
5. Apply the bar and screw with screws.

Conclusion

As you can see, an acceptable price bar is a necessary thing, it solves a lot of questions. The most important of them is ensuring the durability of really expensive flooring. And if you include fantasy and change every three years such a peculiar element of decor, for example, to a different color? It turns out almost a repair. And the mood improves, and money is saved!