How to make MicroSymbol from the usual. How to make MicroSIM with your own hands

New mobile devices require a special approach. Modern gadgets are all the more compact, so SIM cards become small. However, if you do not want to change this element, but it does not fit the new device, try to change its size. In this article, you will learn how to make microsymbol from a regular map using a small number of tools that everyone has.

What size does the standard element have?

First of all, it is worth to find out what the standard element has the usual dimensions. I must say that the SIM consists of two parts: a plastic case and a very small chip, on which all your information is stored. This case in the standard map is very large, but it does not carry any special function.

Usually the dimensions of the sim card correspond to such values: length - 25 mm, and height - 15 mm. The thickness remains the same in both standard and reduced versions. Before you make a microsymbol from a regular card, you need to remember its dimensions: length - 15 mm, and height - 12 mm. I must say that it is rare enough, but there are such cards, the chip of which has non-standard sizes, so it is cut off on foil. Naturally, when doing this procedure, you need to be as accurate as possible so as not to damage the information site.

Ways to reduce the map

Before you make a microsymbol from a regular card, you need to understand how it can be done.

1. Self-processing element with scissors.
2. Cutting in the service center. Naturally, you will have to pay for this procedure. However, the specialist will do everything quickly and very carefully. In this case, you do not have to additionally in any way process the card, so that it can easily enter the slot of the gadget.
3. Independent pruning of excess parts of the element with the help of special equipment. The advantage of this method is that the work will be carried out quickly, and the sections will be rather accurate. That is why additional edge processing is not required. You can do all the actions at home. However, this device has a fairly high cost, and it is not worth buying it just for processing one SIM card. It is necessary in the event that you will be engaged in this procedure on a daily basis.

What equipment is necessary for work?

Before making a microsymbol from a conventional one, you should collect all the necessary tools and prepare the working surface. It should be clean, dry and even. It is advisable that no one distracts your attention, since the work is very delicate.

As for the tools for work, they are required very little:

• Scissors (preferably sharp, as dumb ones can simply break a card, and they should also be small in size to operate them conveniently);
• Line (to determine the size of the microsymbol and apply accurate marking);
• A knife (it should be sharp, since you have to fix uneven edges);
• A standard sheet of white paper (before you make a microsymbol with your own hands, you must draw a template for it). Thus, it will be much easier for you to trim an element;
• Thin marker or pen (for marking);
• Adhesive tape (for attaching a template to an element);
• A simcard of standard size.

Important! All actions must be done very carefully. Do not hurry, because in case of damage to the chip the card will have to be discarded.

How is the layout of the map done?

Before you make a sim card microsymbol, make its markup. This procedure is very important. Lines must be applied very accurately. Share this with a marker and draw a rectangle around the chip. Its dimensions are 15 * 12 mm. If the chip is non-standard, then you have to trim on the foil. Try to make the most accurate movements.

If you do everything right, the result will please you.

How to properly trim an item: step by step instruction

1. Preparation of equipment and the work of marking on paper. To do this, we translate the silhouette of the map onto a sheet and mark the location of the chip on it. Now the drawn element can be cut according to the specified dimensions. Using Scotch tape, paste the resulting square on the chip of the standard sim card.

2. With sharp scissors we begin to cut off the plastic case slowly and confidently. An excellent option is a tool for manicure. The fact is that the plastic is thin enough and can easily be cut even with small scissors. Try not to make sudden movements. You need to cut precisely along the lines, although you can do this, gradually separating the small pieces.

3. Check the size of the received item. To do this, attach it to the template. If all the lines converge, then you have coped with the work. If there are small plastic elements left, then try to gently scrape them off with a sharp knife. "Podtytes" element can and sandpaper. So it will look neater.

4. Naturally, you should further clean the product of dust with a soft dry cloth.

5. Now try to insert the "newly made" simka into your device. If it comes in without problems, it means that you have made an accurate markup. If all actions were performed correctly, the gadget will work without problems: it will see the card, and you will be able to call normally.

Why is it worth it to trim the card yourself?

Before you make a microsymbol in the service center, think about all the advantages of home-made processing:

• There is no need to pay for the procedure;
• You can do everything yourself according to the necessary dimensions;
• No additional equipment is needed (only a pencil, ruler, scissors and paper are needed);
• Does not take much time.

In addition, if you randomly contrive to damage the card, you can always restore it. Now you know how to make a microsymbol from a sim card with your own hands. A little patience, and you can enjoy your favorite ipod. Good luck!