Tuning "Polo Sedan" (Volkswagen Polo Sedan). Specifications, photos and reviews

The first Polo automobile public was shown back in 1975, but these cars were designed for German and European consumers. Since then, the line has been constantly evolving. But these cars were not sold in our country.

In 2010, the company introduced the Volkswagen Polo. This sedan was created specifically for post-Soviet conditions. Something fundamentally new in the model was not. This is the most ordinary sedan class B, based on the Polo platform.

The exterior of the car is also very ordinary. That's why the owners do the tuning of "Polo Sedana", and this is not bad for them. After all, there is work on something. The technical characteristics of the car are quite mediocre, the saloon is inadequate in places.

External tuning

As for the rest of the army of cars, for "Polo" in special stores you can buy any sets of improvements in appearance. Today, the stores have everything the owner does not have enough. Among a wide variety of all offered, you can choose body kits in absolutely any style, but it's worth remembering that German designers also do not just eat their bread, so the design of "Polo" radically changed.

If you compare it to the previous model, now the motorist looks at the small size of "Golf", and his look is a bit suspicious. Why is he angry? It's simple - at the factory the body was not equipped with body kits and special nets.

This grid is not only for decoration.

All those drivers who know what Russian roads are with their gravel, are sure that if this grid is included, so often it would not be necessary to paint a bumper. In addition, this thing looks quite good. From this it is necessary to start to do tuning. "Volkswagen Polo Sedan" with their own hands to improve, and start with this accessory.

Improving aerodynamics

As you know, tuning is not just beauty. This is also useful. Therefore, in addition to the external effect, spoilers and body kit can significantly improve the aerodynamic characteristics and redirect the flow of air. In addition, again speaking about appearance, it is worth mentioning that these details will give the car a characteristic racing outline.

An effective grille radiator will allow the car to receive not only an increased airflow, but also give a spectacular, serious appearance. Such changes in the appearance of the machine allows you to make tuning. "Volkswagen Polo Sedan", the photo of which is presented in the article, looks very serious and "sporty".

We use LEDs

With the help of these small elements it is possible to emphasize the individuality of the sedan.

You can glue the LED strip around the bottom or in the interior area. Many people adapt this light to the trunk. As soon as the city comes night, a small sedan can make a splash, because the dynamic lighting will make the passers-by look back.

Turning the Sedan into a UFO

For example, it's very simple and inexpensive to turn a small urban sedan into a UFO, and it's not a joke. To do this, you need to measure the perimeter of the bottom of the machine and buy the right amount of flexible waterproof LED strip. The tape is cut into 6 pieces. The first part is attached to the front bumper, the second - to the rear, two pieces - along the sides, and two - on the thresholds.

Cut the tape only on the points where the LEDs are separated. Do not forget about degreasing the surface. All this must be glued. Wires are connected to those that go to the headlights. It will be a very effective tuning of "Polo Sedan". The car literally slides over the asphalt. It's worth a try.

Optics

As for the daytime running lights, it is not entirely clear whether they are needed according to traffic rules. However, motorists put them with great pleasure. Today in stores you can find a huge number of very different optical media for every taste and color for this model. The choice is represented by both LED and traditional solutions. When choosing accessories, it is advisable to familiarize yourself with the traffic rules, where the brightness of the lighting devices should be indicated. After all, cool and effective tuning of "Polo Sedan" assumes only the brightest lights, and after all they can easily be a violation.

If we talk about fog lights, then here too the choice is huge. Some of their most expensive, Hella, can be purchased already complete with special bumper pads. They look, well, very impressive, though, and the price they have no less than 10 thousand. But there are factors that justify it. These fog-lenses are lenticular, and there is no quality, and there have never been any complaints.

You can also buy those that are a bit simpler.

They are unglazed and cost about 6,000, but the difference is barely noticeable to the inexperienced eye. And the fog lights are a useful and necessary thing. In addition, these will be branded and beautiful, which is very important for tuning.

Suspension and chassis

Engineers who created Polo, carried out the suspension adaptation specifically for Russia. However, after this process of adjustment as such, no tests were carried out. All the adaptation was reduced to the fact that the designers tightened the suspension, strengthened the springs.

Today, it's easy and inexpensive to make tuning. "Polo Sedan" with their own hands in tuning the suspension plan with the help of kits that are offered in stores. With them, you can significantly change its characteristics.

Unfortunately, radical changes will not be achieved - the car still can not participate in the rally. However, you can very effectively lower the ground clearance and adjust the springs for the necessary conditions of use.

As for the discs, the tuning of "Polo Sedana" is possible for every taste. The main thing is to have enough money. For this kid created so many discs that you can choose a whole week. In this case, there are even special models for this particular machine. Their diameter is only 14 ", but this car of this size is more than enough.

Soundproofing

The manufacturer is not too concerned about this, so during tuning motorists have to take measures independently, especially if the owner loves good music. In the cabin should not be heard any extraneous sounds.

To do this, get vibro-absorbing materials, for example, SGM "Vibro M2F", "SPLEN-4."

This will reduce the noise level in the cabin by about 40%, which in fact is very, very, very much.

Specialists note that it is best to immediately purchase a package in assembly and carry out work in a complex. So, for the front door you need about 3 sheets of "Vibro". "SPLEN" fits too. For the back door you need the same amount of materials. On the floor laid on one sheet, the wheel arches are soundproofed the same way. The ceiling will take two. The trunking is two layers. In the hood - 1 layer "Vibro".

Work on the salon

So, when everything is done from the outside, you can move inside. Here too, work is enough. Riding a car should be comfortable and enjoyable. When working on the salon everything depends only on imagination and financial possibilities.

Reviews say that you can replace the covers, trim the interior with fur or skin.

You can also add some interesting options that the manufacturer has not installed. Many put in the salon interesting audio and multimedia systems, thereby adding to the car functionality, which he lacks.

Cobra Misano Anniversary

If the car already has a sports suspension, there are alloy wheels and good tires, then it would be good to pick up another suitable for an active riding chair. English experts have made ideal carbon chairs specifically for the new Polo. It is they who are recommended by car owners.

Steering wheel MOMO

In Italy they know a lot about cars. This can be exactly applied to sports steering wheels . Among the products of this company there are worthy models, this is a quality product.

Head Multimedia Device

In the base baby Polo is equipped with only audio preparation and a regular system. But the car is very easy to adapt to a serious system RN5-510. There is a widescreen touch screen, support for all modern audio and video formats, a hard drive, a navigation system and a complete set of all modern entertainment.

Chip-tuning «Volkswagen Polo Sedan»

Technical characteristics in this machine, of course, are far from sporting, but for the Russian citizen they are quite sufficient. But if you really improve, so improve completely and comprehensively. Modern technology can do a lot, if not all. Of course, after this car will not become a sports car, but it will be better to go.

What can be achieved with the help of chip-tuning?

Tuning engine "Polo Sedana" allows you to get a gain in power. Also, by improving the firmware, dynamic characteristics and maneuverability can be improved. Experts today are able to increase the maximum speed, provide a fast and confident overclocking. Changes in the firmware also seek to increase the elasticity of the engine, improve idle operation, increase torque.

The throttle knob responds faster to the pedal press.

In general, you can do everything to manage the car was comfortable everywhere and in all conditions. Reviews say that the flashing helps in eliminating errors that may be present in the serial software. About what exactly improves this procedure, it is necessary to learn from those who have already made themselves a chip-tuning. "Polo Sedan" reviews after this procedure is characterized positively. Owners note the high efficiency of this operation.

Many people note the appearance of traction, which was not there before. It is believed that the "Polo", until the engine is untwisted to 3000 vol., Does not pull. After the chip is started, the motor starts to pull straight from low speed. Also note the decrease in fuel consumption. The engine starts to "breathe" and better disperses the car.

Also note the best reaction to the gas pedal, and this is not a fairy tale from the brooders. So tuning "Polo Sedana" really allows you to change the car.