Modern technology of installing plastic windows

It is known that the design of the plastic window, despite its strength, can be damaged during installation. That's why it's so important to choose a good company whose employees are familiar with the technology of installing plastic windows, otherwise you do not have to rely on a positive result. If the technology has been broken or not observed in the process of work, the assembly seam becomes unusable, on average, in three years.

The correct approach to the installation of windows - the use of special means that provide vapor barrier, waterproofing and noise insulation. Unfortunately, often they are replaced with a single mounting foam. In this case, only the installer remains in the plus, because reducing the cost of purchasing materials, he leaves a part of the money to himself. The quality technology of installing plastic windows, with respect to and control of each stage, allows you to get a lasting result. Otherwise, the consequences can be deplorable. Currently, you can see a lot of windows, the seams of which become too thin or completely deformed under the influence of moisture and sun.

Correct processing of internal and external slopes also plays an important role in the installation of windows . Inside the room humidity can be increased, which leads to a decrease in the insulation properties of the foam up to 20 times. If the foam left outside the window freezes, its insulating qualities are reduced 80 times already. To prevent this from happening, professionals use a sealing foam. Pre-compressed, it gradually expands and allows for permanent insulation. The established technology of installing plastic windows allows you to solve all the arising problems in advance and prepare for such surprises as severe frosts or too high temperatures on the street.

Polymer tape, on one side of which there is a layer of butyl is a vapor barrier tape, the work with which is conducted indoors. It is glued using a sticky strip on the frame along the entire perimeter, after which it is additionally poured with a mounting foam. The free edge is installed on the escarpment, securely securing the structure. The window should be installed so that it does not accumulate condensate, for this purpose the frame is specially installed a little in the depth of the wall or the slopes are pre-insulated. In addition, the technology of installing plastic windows can not go against the rules of dismantling old windows.

In order not to damage the space, first of all, the doors are removed together with the glasses, then the frame is cut into several parts and pulled out so as not to damage the slopes. After cleaning all the cracks and removing the putty, you can proceed with installing a new option. It is worth noting that the technology of installing plastic windows in a wooden house may differ somewhat from the work in a brick building. To ensure that the drying tree does not experience great pressure, the window frames are protected by a special casing - a metal block-reinforcing bar.

Correctly executed technology of installation of windows will allow to receive a qualitative design, which longevity will not cause doubts. According to the rules, the windows can be installed with mounting plates that are hooked on the outside of the frame and fastened with dowels to the wall. So it is possible to work with a nylon dowel and a screw that passes through the frame with a screw or a metal frame dowel.