How to properly cut the corner on the bath: instructions step by step with the photo

So, you made expensive repairs in the bathroom. The brand new plumbing sparkles with nickel-plated surfaces, the snow-white tub is neatly framed on all sides by a beautiful tile. Everything seems ideal, but something is still missing. Maybe you forgot to install a special curb in places where the bath comes into contact with the tile?

This element affects not only the aesthetic appearance. Such a finish, if done correctly, hermetically closes the gaps between the bathroom and the walls, thus preventing moisture from penetrating.

This article is a detailed instruction explaining how to cut a corner on the bath step by step (with a photo), so that the cut edges fit well together without creating unpleasant gaps.

Select the element type

First, let's try to understand what the finishing corners for a bath are. With all the breadth of choice, the borders can be divided into four main types. Whichever corner you choose, it will refer to one of the following types.

Bath accessories can be:

• Plastic;
• Ceramic;
• VIP quality;
• Tape.

Plastic corners are easy, they are easy to process, you can cut even with a clerical knife. And they are cheaper than, for example, ceramic specimens. The latter have a high price, and it is more difficult to cut them, but the appearance of such curbs justifies these inconveniences with interest.

Corners of VIP-quality are made of marble, granite or other natural material. They are much more expensive than all the others, they are rather capricious in processing, but they look very solid and luxurious.

Border curbs are pasted over the tiles. You can cut them with any tool.

To understand how to properly cut a corner on a bath, you need to decide which option to choose, because each material has its own individual physical properties, such as strength, brittleness.

Measure the walls adjacent to the bathtub

How to saw and install a corner on the bath? To accurately know the total length of the necessary materials, which will be needed to finish the bath from all sides, you need to take a tape measure. The measuring scale must be applied close to the surface along the contact lines of the bath and tile.

We need to measure three sides to the walls. The resulting figures must be folded and divided into the standard length of the corner. You can find it in the store where you are going to purchase the materials. The resulting result should be rounded.

To the desired number of corners, you can add two or three more in case if something goes wrong during the cutting. Such a stock is especially useful if you have chosen ceramic or marble corners as curbs, because you can make chipped pieces when cutting elements without some experience of such work.

All measurements should be made before cutting the corner on the bath, because, as the proverb says, "measure seven times, cut once".

Measure lengths of the desired length

It is equally important to measure the corners correctly.

First we select the necessary lengths along the length. To do this, you can use roulette, a building ruler or "centimeter". If you decide to use curbs made of plastic, then you can measure out certain distances, because cutting such material is easy enough. In the case of corners of ceramics or marble, it is worth leaving a little more space, that is, adding two centimeters to the length of each segment. These stocks will be useful to you, so that you could grasp the pliers for breaking off the surplus along the drawn line.

The marks in the right places of the corners can be made a special construction marker. The labels he labels are easily rubbed off with alcoholic napkins.

We will join the corners afterwards, using special tools, so that they form a suitable angle of 45 ° or 90 °. Next, it's about how to cut a corner into a bath. The photos will help you better understand all the steps of this process.

Mark the slice lines with the help of a chair

It is important to remember that in the place where the two corners will fit, it is necessary to make a cut at an angle of 45 °. If to note by eye - most likely, it will turn out not so accurately. But what tools do you use to make the slice smooth and matching the right angle?

For these purposes, you can apply a fairly simple tool. If you do not know how to properly cut the corner on the bath, so that the corners of the cut elements match, use the construction chair for accuracy of the markings.

This part is a short bar with a notch in one of the longitudinal faces, intersected by grooves, in which you can put a saw blade. In the longitudinal recess should be enclosed corner. The grooves, mentioned above, are located at different angles. By inserting a hacksaw in the desired groove, you can cut the corner as accurately as possible.

Using the mall to mark corners

Malka is another measuring tool. In the plumbing and carpentry they use it to mark anything at certain angles. The use of such a measuring device will help you not make mistakes before you cut a corner into a bath. The instruction for using the Malki is quite simple, even a novice builder will cope with this.

Malka is a construction of two rulers, connected by a clamping joint. In some models of the instrument, there is also a circular scale of degrees resembling a protractor. Malka is very easy to use. To a more massive ruler, an angle is applied, the second bar is retracted to the desired angle and used as a guide when marking in the right place.

How to cut a plastic corner

One of the most popular types of corners is a curb of plastic. This is not surprising, because this material is much easier to process than ceramics. It is also cheaper, looks great. In addition, the stores are a wide variety of such curbs.

How to properly cut a corner on the bath, if it is made of plastic? This material is so malleable and unpretentious in application that it can be cut with almost any tool. Perfectly suitable for this task is an ordinary hacksaw for metal. You can use a simple saw, but its strongly diluted teeth will create a too thick line of cut.

Also, a plastic corner can be cut with a Bulgarian or a construction knife. Some specialists use for this purpose a red-hot blade of a clerical knife. This method is more laborious, but the result is a jewelry, especially if the locations of slices are properly processed.

How to handle the edge of a cut off plastic corner

When the curbs that are suitable for the length are ready, they need to be aesthetically pleasing. This can and should not be done. If the corners of the slices are chosen correctly, in the end everything will look very good. But if the spirit of perfectionism in you rebels against this, you can remove the burrs and notches from the ends of the product with the help of sandpaper or natfil. This will give the assembled structure from the corners a finished look.

You can use a regular file. Take one of the pieces in the left hand, and the instrument in the right hand. Gently carry the file along the edge of the end, trying to drive it in one direction. Emery is used in the same way. In addition to the above, you can use any tools designed for grinding and cleaning surfaces.

How to cut a ceramic corner

Ceramics are cut according to the same principle as glass. You can apply the Bulgarian. It is important to choose the right disc. Best is a circle with diamond dusting. If the bulgarian is not at hand, you can try the following method. The corner fits into the chair, a ruler is inserted into the groove. A line is drawn along it sharply and with the pressure of a glass cutter. Then it is necessary to put a corner on a table covered with soft cloth, and strike a sharp blow along the line of the cut. If the unnecessary part is not broken off completely, you can gently break it with pliers.

This method requires experience in cutting tiles or glass, so if you do not have additional corners on which you can experiment, it is better to use another method.

Now that you have an idea of how to properly cut a corner on a bath, if it is ceramic, you can decide whether to use a curb of this type or not.

How to process the ends

The last step, which is worth making - to process the corners in the places of cuts with an emery bar. You can apply the Bulgarian, installing a special grinding wheel on it. You can use electric emery. The main thing is not to overdo it with the size of chamfers. They should not be conspicuous, you just need to rid the edges of the curbs from sharp protrusions.

So, now you know how you can cut the corner on the bath, from whatever material it was made. Dare, and you will succeed!