How to wind flax on a thread: detailed instructions

Everyday life often causes a person to carry out minor repairs, during which a rewinding is required. It can be a radiator, as well as a plumbing. Every home master must learn how to correctly apply the patch, as it will come in handy sooner or later. Water pipes can be made of metal, plastic, metal-plastic or kapron, each type of material has adapters for joining other pipes. Such similar docking will be discussed below.

For reference

Quite often, home masters have to decide how to wind flax on the thread of the crane. If you want to tightly connect the elements of the water pipe and pipes, then do the work, which is called packing. If necessary, to couple two pipes at right angles with a coupling, it is best to cut the threads at their ends. The coupling will have internal threads and outer turns. Twist them will not be enough, for a proper connection, you need to seal the threads.

Description of linen pakli

Before flax is wound on a thread, you should get a closer look at what a flaxen tow is. It is a fibrous material that is used to seal threads. The product is natural, it is made from primary processing of fine, homogeneous and long-fiber flax. The area of use of linen pakli is very wide. Depending on the manufacturing technology, the material is tape, sanitary, jute or construction. In the latter case, we are talking about insulation, which is capable of ensuring reliable tightness of almost any joints. For its production, completely combed fibers are used, which are supplied with bales. Such material is used for construction work on sealing joints, warming the log house and laying wooden elements. It is natural, it is especially appreciated among those who build wooden houses. If the construction tow is supplied in rolls, then it is called a belt roller. This material is still used for caulking stitches in log cabins and laying crowns. As a plus of using flax for plumbing work is its cost. The material is much cheaper than any other. It is consumed economically, although the fibers are thin, but have high strength. If they are wound correctly, they can be used for any type of work, where any connections are used. It can be ceramic and cast-iron pipes.

Additional benefits

Before winding flax on a thread, you should know that it swells, absorbing moisture. This allows you to increase the tightness, because leakage has no ways. The mechanical stability of the material is high enough, it is this characteristic that allows the fitting of sanitary ware, while the hermetic properties are not lost, the connections can be turned off for a full turn or half a turn.

Disadvantages of using flax

If you are thinking about how to wind flax on a thread, you should first become acquainted with all the minuses of this material. The substance in the base is organic, so it can rot under the influence of air and moisture. They can get inside during preventive examinations. For this, the paklet is accompanied by additional material that is able to prevent decay processes. It can be oil paint, sealing paste, lithol or salt.

In some cases it is necessary to prepare the thread before winding, and if the material is placed too thickly, this can cause damage to the joints, which is especially important for brass and bronze. If before you there is a question on how to wind flax on a carving, you should remember, that the described sealant demands from the master of knowledge of rules on winding. The accompanying materials in combination with flax can greatly complicate the disassembly, this applies to silicone or oil paint. Sometimes such additions make the installation process impossible. Not suitable for using flax, where the temperature can reach a mark of 90 ° C. In such places, the material is welded and loses its sealing qualities. If you work with steel, you should always follow the winding technology. Otherwise, the thread may be corroded.

Winding flax on a new thread

Before winding flax on the thread, if it is new, you should prepare the windings. Many manufacturers today produce fittings, which are already threaded, but the latter are notches that are intended for winding flax. The fact is that on a smooth thread the material can slip, it sticks into a bundle, which leads to a breach of the sealing. In order for the fibers to be able to catch, the turns must be notched. If necessary, you can apply them nadfilem, hacksaw on metal or file. Some masters use a plumbing key or pasatis: the thread should be wrapped around, and after a slight pressure, apply serifs.

The main thing in this work is to achieve roughness in the coils. Before flax is wound on a thread, it is necessary to separate one strand from the whole braid. It is important to grab so many fibers so that the winding does not turn out to be very thin, but it should not be thick either. Experts advise using a thickness of flax that corresponds to two or one match. If there are lumps in the strand, then they need to be removed, like small villi.

Methods of work

You can impose a patch on your own technology, some experts twist it into a tourniquet, someone plaits into a weak pigtail, while others are laid in the form of a loose thread. The procedure for applying additional material can also be different. In some cases, you can lubricate the thread by wrapping it with fibers, and then apply another layer. Sometimes the fibers are impregnated beforehand, and then they are prepared. Both options are considered correct. If you are thinking about how to wind flax on the thread - clockwise or counter-clockwise - you can listen to the recommendations of experts, some of them wind the strands along the thread, while others act on the contrary. In this case, the end of the strand should be clamped with a finger outside the turns, the first turn must form a cross, this will fix the material. Prosvetov should not be left, you need to stack one turn to another. If you make a connection, an excess of material will be squeezed out of the fitting, this is true if you are working with an iron pipe and a steel clutch. Brass connections, which is relevant for those that are manufactured using modern technology, burst from strong pressure.

Recommendations of a specialist

Around the coiled flax, it is necessary to apply a plumbing paste or any other sealing material, the movements must be rotational. The work should be as accurate as possible. The second end should be glued closer to the edge of the thread, and before tightening, you need to check if the pipe hole is filled with a sealing material. Now you know how to wind flax on the thread, photo of the work you can see in the article. However, you can not understand from them that it is necessary to tighten the elements with a moderate effort. If the nut goes easily, then a little flax was laid. The winding will be correct if the material does not come out, and around the joint the surfaces remain clean. For gas connections, use of organic cotton is not recommended, this is due to the fact that under the influence of gas it and silicone, which is used additionally, are destroyed. Here the most appropriate use of a tape.

Winding flax on products from ecoplastics

If you are thinking about how to wind flax thread on the thread, then you can use the technology that is used in the case of work on products made of eco-plastic. This material, like brass, can burst. The main thing is not to overdo it. Before starting work, both fittings should be connected, count the number of revolutions. Flax is wound evenly, its surface is smeared with additional material, only after you can connect the fittings. If idle, you counted 5 revolutions, then after winding the tape, it's best to do about 4.5 turns, while you do not need to reach the end. In this case, it is more expedient to apply the packaging paste in place of the sealant.

Conclusion

Quite often, home masters are wondering about how to wind flax on the thread of a pipe. In this case, dismantle the connection by examining the thread. On the turns you need to walk with the tip of a knife or an awl, this method will get rid of accumulated debris. With a metal brush, before winding the tape, you need to clean the turns until you see the gloss.