Plaster for the bathroom

The most common material that is used for finishing bathrooms is tiles. It is ideal for this room, because it perfectly withstand moisture and temperature changes, and also does not give in to steam. However, the bathroom can be made more attractive with plaster. Plaster for the bathroom is suitable and Venetian, and textured. True, you can not use it anywhere. For example, in the shower you will still have to cope with tiles.

The application of plaster is carried out in several stages. First, the base is prepared. The surface must be cleaned of any stains. The most common of these are stains of grease, paint, the remains of old materials. Sometimes on the concrete there are divorces. If the bathroom already has old plaster, then it must be removed. Decorative plaster for the bathroom is applied in the same way as any other. That is, on the surface cleared of dirt and old materials. When the walls are cleaned, they need to be processed to better bond the plaster to the concrete. To do this, use the "cutting" method: on the wall make shallow lines. You can also prepare a sandblasting unit.

At the second stage, the first layer of plaster is finally applied. This is done by the "throw-in" method. The layer that is applied to the walls during the first treatment is very liquid. Plaster for a bathroom in it has a thickness of no more than 4-5 mm. When the work is done, the leveling is not performed. The layer should dry up. Once the walls have dried, it is necessary to primer them. The primer is applied to the plaster layer and evenly distributed by a half-trowel. After the first layer of soil has dried, you can apply a second one. However, as a rule, one is enough. The main thing is that the entire surface is evenly covered with the composition.

After priming, the final application of the plaster follows. It differs from the stage of applying the layer under the tile only by the thickness of the layer itself. Usually, for tiles, the thickness is 0.2 cm, and for decorative finishing - 0.5 - 0.7 cm. The plaster for the bathroom is chosen specifically, based on its characteristics. In stores you can find special compounds that are perfect for wet rooms. The technique of applying the composition is not as complicated as the beginner might seem. After moistening the primer, you need to take a wide spatula. At the edge of the spatula, plaster is picked up, which is then smeared on the wall. The tool must be firmly pressed to the surface at an angle of 20 degrees. Then the plaster is rubbed off, being still damp, using a special float.

If the plaster for the bathroom is planned to be textured, then at this stage the work does not end. This layer serves as the basis for the next, decorative. In this case, a narrow spatula is used in the work. The decorative layer allows you to create different patterns and other elements on the surface. This is a creative work, where you can show your taste and imagination.

Plaster for the bathroom has been used not so long ago. This is a relatively new technology. Therefore, this decoration allows you to stand out and create something original and unique. About 90% of all bathrooms are still tiled. Despite the richness of the choice of such finishes, this material has already managed to get bored. Finishing with tiles is a template that needs to be destroyed. Using plaster, you can diversify the interior or, on the contrary, emphasize its details. Thus, you can create a single style throughout the room. Plaster for the bathroom gives a wider range of possibilities than tiles or any other material. If you follow the instructions described, the finish will be excellent. She will stay for a long time, please the owner and surprise his guests.

When working with decorative and textured plaster, you must follow the safety rules. It is necessary to protect your hands and face from getting the mixture.