Water heater AEG flow-through: principle of operation, advantages and prices

All of us though sometimes faced a problem of absence of hot water in the house, whether check of water supply networks in the summer, failure at any time of year or at all residing in the house where hot water is not present as that. In the latter case, a gas water heater is usually installed , which is cheaper than electric water, but at the same time it perfectly heats the water. In other cases, people prefer not to contact explosive gas, but buy an electric version that will heat water, and is safer by itself. One of the many models on the market is the flow-through water heater AEG (Allgemeine Elektricitäts Gesellschaft).

Specifications

• Water heater AEG - flowing.
• Method of heating water - electric.
• Method of water supply - pressure or non-pressure (depending on the model).
• The inlet pressure is 0.18-10 atm.
• The rated power is 7.5 kW.
• The required mains voltage is 220 V.
• It is installed vertically, flexible connection for inflow and outflow of water is attached from below.
• The heater is attached to the wall.
• Dimensions (W x H x D) - 20 x 36 x 10.6 cm.
• Weight - 2 kg.

Principle of operation

AEG flow-through water heater with control system RMC 75 is designed for heating cold water to the required temperature for household needs (for one or several points of draw-off). The required water temperature is adjusted by means of a mixer or regulator on the front panel.

At the heart of the device is a heating element (tubular electric heater), which is made of copper. It is located inside a high-strength metal flask. Such heaters do not influence the hardness of the water, so they can be used in any place where there is water. A special coating inside the bulb and on the surface of the heater protects against scale. It is the temperature of the heating element that is controlled by the water heater system, and when it overheats, the device switches off automatically.

Water heater AEG flowing and the like do not store water and then heat, and heat it in real time in the required volume to the set temperature. It should be noted that thanks to this system of work less energy is spent.

It is important to remember that different models of water heaters are designed to work in different types of mains voltage (single-, double- or three-phase).

The AEG flow-through water heater is switched on and operates at a constant head of water, the water is supplied to the water heater continuously, regardless of whether the appliance is switched on. The pressureless is weaker in power and, unlike the pressure head, can only work on one tap in the house. At the entrance of the water in the device, a valve is installed to regulate the high water pressure in the pipes, while at the outlet there is a free flow of water.

Security

German quality and compliance with European safety standards act as guarantors of good and safe operation. For AEG pressureless or pressure flowing water heater to work for a long time and without problems, it incorporates overheating protection in the form of a temperature limitation, which ensures safe operation of the electrical appliance. Also there is protection against penetration of the AP-25 water through the wires and inside the device, thanks to which the water heater can be installed directly near the mixer and the place of showering.

It can be used both in a private house / apartment and in commercial real estate, and some models - in public catering establishments, where water practically does not turn off during the working day.

Advantages of AEG water heater

• Compact size (takes up a small space, unlike large 30-liter water heaters, but it also heats the water well).
• Economy (does not "eat" money, because when you turn on the heater, you spend a relatively small amount of electricity).
• High performance (able to work without interruptions for several hours).
• It can provide several points with hot water (it is possible to connect the piping to both the tap in the bathroom and the kitchen, but this option is not available for all models).
• Multilevel protection of the device, which was discussed above.
• Automatic switch-on and shut-down in case of overheating, while cold water does not start to drastically.
• Ability to adjust the power (the more expensive the model, the greater the possibility to regulate the head, the water temperature).
• Easy to install due to its small size and weight, as well as complete equipment and installation instructions.
• Affordable price for most models.
• Warranty from the manufacturer in all stores is 3 years, for some types - up to 10 years.

Package Contents and Appearance

In the kit with a water heater you get a regular fixture, a water-saving shower attachment with mounting fixtures, as well as operating instructions and wires for connection to the network. In the store, you can pick up additional accessories in the form of shower heads, hoses, fasteners, etc.

The color palette of water heaters is limited to a black and white scale. The handle is usually marked with a red strip.

approximate cost

Flowing water heater electric AEG costs from 7 to 80 thousand rubles. The cost depends on the transmitting capacity (the number of liters per minute), the control capability (buttons, touch panel, remote control), from the appearance and other characteristics. Water heater AEG RMC - one of the most popular and medium-priced models, costs about 15 thousand rubles.