Conditioners in Elektrostal: Several Boards for Selection, Installation and Operation

The presence in the apartment, the personal home, in the office, or in the production room of complex household appliances, including climatic equipment, does not surprise anyone today. For some, this is a tribute to fashion, but for most users it is an urgent necessity dictated by the tense level and rhythm of modern life, the magnitude of physiological and mental loads, the need of people for relaxation, restoration and maintenance of many vital functions in tone. This fully applies to such a novelty in our daily routine as air conditioners. Conditioners in Elektrostal are indispensable when we need to create a comfortable temperature and humidity in the room, clean the air of dust, chemical impurities and microorganisms or saturate it with useful air ions and even vitamins, prepare the room in advance for people to come home from work, or to rest at night ... Much (And not only mentioned above) can these clever helpers. However, the more functions a device can provide, the more expensive it is, and the more complex it is, the inevitably, according to all the canons of the theory of reliability, it is more likely that any of its systems or nodes will exit beyond the normative functioning. In this regard, I want to share with fellow countrymen, potential buyers of air conditioners of Elektrostal, some professional impressions.

While we were supplying, installing and servicing air conditioners in Elektrostal, Noginsk, Pavlovsky Posad, Balashikha and Zheleznodorozhny for more than one year, we noticed that when first contacting us, many customers are often focused on acquiring "branded" media brands with "sonorous names", but Not ready for the fact that for this "sonority" (and, often, just for it!) They have to shell out a lot. And this, of course, does not suit them very much. We have to, sometimes for a long time and persistently, conduct educational talks with people, figuring out what, in fact, they expect to get air conditioners in Elektrostal, which optimum set of air conditioner capabilities they would have arranged, and which, most likely, for them is redundant.

We explain to people that we need to buy not just air conditioners in Elektrostal, but also to correlate their requests with the nature of the room (the living room, the bedroom is the room, or the kitchen, the office of the employee, or the sewing workshop ...), and with its location in the general layout of the house (Apartments, buildings): it is pass-through or isolated from other premises, located directly opposite, or removed and obliquely in relation to them. It is necessary to find out the volume and area of the premise location of the air conditioner and its orientation to the sides of the world (north-south), the conditions of its sunlit illumination during the day and year, the number of stories, the material of the walls and the character of the roof of the building (for example, in panel "Khrushchev" Roof and "soft roof" on the top floor with the southern orientation of the window for normal conditioning will require an apparatus of the same brand, but for one or two standard models more than for the same purposes in the "stalinka" of the first and middle floors, the orientation Windows on the sides of the world otherwise).

Of course, the choice of air conditioning depends on the material capabilities of the client. With all this in mind, we often advise our customers to choose not on expensive equipment, but, for example, reliable, easy to operate and maintain, and, more importantly, cheaper air conditioners such as GREE, AUKIA, or PANASONIC, which, Word, we always have in stock.

Second, what I want to draw attention to customers is the features of the installation of the indoor and outdoor units of the air conditioner.

Very often, the owners express their wishes for the installation of the indoor unit "somewhere higher and that - imperceptibly" in the interior of the room, without taking into account such technological requirements as minimally necessary gaps from the ceiling, curtains, etc., the orientation of the flow of cooling air relative to the working Zones and recreational zones (the location of the training or working table for people, beds and places for viewing TV ...), the availability and location of hidden communications in the walls and ceilings. Often, customers are asked to install an external unit of equipment "further away and below the windows and balconies." Here we must take into account that the length of inter-unit communications can not be infinitely large, since Their large length tightens the working conditions of the compressor, inevitably reducing the period of its trouble-free operation, requires an excessive joint of pipelines and electric wires, and the cost of installation costs more than its standard version, limited by the factory equipment of the air conditioner. In addition, it is necessary not to forget about the need to provide conditions for convenience (read - greater assurance of long-term trouble-free operation of the air conditioner) for installing outdoor communications and maintaining the entire system during its operation (cleaning the ventilation grilles and the drainage channel, checking the refrigerant pressure and refueling Cases, checking and adjusting the reliability of fastening blocks, etc.). Sometimes, on the contrary, customers ask to install an external unit above the internal one, which, in principle, is not forbidden, but may entail a rise in the cost of installation and operation, because Will require either drilling a separate channel in the wall for laying a drainage pipeline (ensuring a natural drain of the condensate "under the slope"), or installing an additional water pump for forced drainage.

From our production experience, we often recommend to our customers when performing inter-unit communications through loggias or balconies to lay them in decorative cable channels, which, with a slight increase in the cost of installation work, significantly increases the likelihood of their preservation from domestic damage and aesthetics of their appearance. The same applies to our advice on laying the power supply wires of equipment inside the building in the cable channel.

Undoubtedly useful for our customers is our proposal to use for the installation of external blocks not thin-walled welded (and therefore - short-lived) wall-bearing brackets, traditional earlier for air conditioners in Elektrostal, and more powerful prefabricated with additional lower support brackets. They serve much longer than welded, without increasing the overall cost of installation.

To increase the operational reliability and the service life of the equipment, we also recommend the customers' choice of air conditioner models having a metal case of external units, which more effectively protects the equipment against accidental damage and falling of ice, icicles and foreign objects from roofs and upper floors of buildings. At the same time, there is practically no need to install expensive metal protective hoods over external blocks. By the way, all the models recommended by the above companies (GREE, AUKIA and PANASONIC) are equipped with such metal enclosures.

We are sure that people who want to buy air conditioners in Elektrostal will appreciate our advice and will continue to cooperate with us, and we, for our part, will continue to inform all interested parties in good faith of their positive experience and all novelties in this field.