How to make a shower corner with your own hands: installation technology, installation and recommendations of professionals

Unfortunately, not always the parameters of the bathroom allow you to equip a full bathroom or install a standard shower. For small rooms and small houses, the perfect solution for the hygiene unit equipment will be the arrangement of the shower corner, which can be made independently to save costs, taking into account individual needs and the layout of the home. You'll have to buy some of the factory elements, but the savings will be significant. A shower corner with your own hands can be erected with or without a pallet.

Designing

Choosing a place for the arrangement of the shower, it is important that all water supply and sewerage systems pass as close as possible. Otherwise, interference will be caused in the form of padded pipes, especially mounted across the doorway. Sewer drain must be at least 8 centimeters in diameter.

Try to lay the drain on a level with the toilet, wash, as additional bends increase the risk of gaps. If there is a water tank in the room , the pipes should not run through the entire room. The minimum distance from the central pipe to the corner will ensure a steady head of water, plus there will be savings in mounting additional fittings, pipes and taps.

The place of adoption of water procedures should be spacious enough for free movement (at least 70 * 70 cm). Installing a shower cabin with a 90x90 pallet with your own hands, remember that there are several standard sizes: 70x77, 80x80, 100x100. Given this aspect, you can choose the best option for your housing.

Features of the installation

To ensure the correct water stack and to prevent splashes on the walls, a pallet is installed and a special curtain made of material that is not afraid of moisture. Factory models of the shower corner are equipped with a pallet made of plastic, metal or even stone. However, the plastic version eventually turns yellow, it can burst, the metal tray shows a susceptibility to corrosion, and stone specimens are very expensive.

The most profitable project will be a shower corner with their own hands, which will allow not only to save, but also to realize individual preferences. Significant stage is the arrangement of the sink. There are several ways to exit the sewer structure. The size of the nozzle is selected taking into account the interval from the bathroom to the riser pipe. It must be remembered that the slope is taken at least two millimeters in height.

At a low height, a raising of the floor level should be provided for camouflage. You can also install items in the wall by hiding them in a special box. Further, the drainage branch pipe is extended to the center of the pallet, ensuring adequate waterproofing, installation of the ladder and adjustment of the pipe placement.

Arrangement of a corner without a pallet

Installation of the shower corner with their own hands begins with the arrangement of the screed. First, you need to perform the installation of the formwork. If you plan to later finish the floor with tiles or other finishing elements, their thickness must also be taken into account.

The formwork is filled with concrete mortar. It must be remembered that there must necessarily be a slight bias (at least one and a half percent) from the beginning of the corner to the ladder. To ensure this moment, a certain portion of the mixture is smoothed over the last section, gradually moving to the ladder. After the screed has dried, you can proceed with the arrangement of the self-made pallet. There are two variations of its manufacture:

• Monolithic construction;
• Brick edge.

In the second case, the installation of bricks, plastering and finishing the entire workpiece. Then work is done on the construction of the shower, For this you can use a curtain frame or glass doors, a minimum thickness of 60 mm.

Tools

Installing the shower corner with your own hands will require the presence of a certain tool. The following devices will be needed:

• Electric drill with a set of drills;
• Cross and flat screwdrivers;
• building level;
• Dowels, nuts, other fasteners;
• silicone sealant.

If a decision is made to replace the bath with a corner, it will be necessary to carry out a cardinal re-planning. It is advisable to sketch out a plan in the form of a diagram or sketch where the locations of each element will be clearly marked.

First we measure the width, height and length of the room, which are noted in the project. Then, a place is selected for mounting the corner, its dimensions, placing the washing machine and other household appliances.

The placement of pipes is also indicated. For floor and wall finishing, it is recommended to use a tile, which will allow the back wall of the cabin to be designed as a protruding part of the wall.

Construction with pallet: first stage

Installation of a shower corner with a pallet with your own hands starts with the following operations:

1. The old sanitary ware is being dismantled.
2. The walls and corners are leveled out, tiles are laid, waiting for the time until it freezes.
3. Installation of sewer and water pipes leading to the shower corner is in progress.
4. Choose a pallet for the design, a good option is acrylic with a corrugated surface. It is strong enough, safe and resistant to temperature changes.
5. Correct installation of a corner for a shower requires its fixation in a certain position. To prevent deflection of the structure, it is installed on the special legs that are supplied in the kit. To prevent water from flowing, the pallet is mounted in a dense ratio with the corner part of the wall.
6. The tile is rubbed, the seams are treated with silicone to ensure sealing and counteracting the formation of fungi and mold.

Basic work

The installation of doors, carcass and other elements is also carried out in stages:

1. For the installation of door and frame structures, special fastenings are used, which do not violate the aesthetics of the cabin.
2. To get a practical and reliable shower enclosure, the installation of the frame and its attachment to the floor and ceiling is done using dowels. On the support pipes, horizontal elements fixed in the wall are fixed.
3. Then choose the location and type of the door, which can be central or lateral type.
4. The most reliable door constructions in this case are glass products, as well as acrylic or plastic.
5. The installation of the door requires attention and caution. It is necessary to place the construction rollers in the guide grooves and check their sliding.
6. Also, the locking mechanism is checked for the presence of slots and the smoothness of opening over the entire displacement area.

The final stage

To finally complete the shower corner with your own hands, you need to install a mixer, curtain, shelves. The final sealing of all joints is carried out, by applying silicone composition to the previously cleaned and dried surfaces.

After the sealant has dried, check the water supply, the integrity of the fitting connections and the operation of the mixer. To control the sealing, the stream is directed to the treated surfaces. If water seepage is observed, the procedure should be repeated.

Nuances of arrangement of a corner for a shower with a pallet

When using a shower enclosure in which steps are not provided, it is reasonable to install a flat pallet with low beads. Each element is equipped with adjustable legs, which makes it possible to adjust its height, depending on the specific conditions.

First of all, you need to determine the location of the drain hole, and then adjust the height and slope of the pallet. In addition, it is desirable to refine the joints with a special edging.

For an uninterrupted flow of water into the sewer, it is recommended to install a pallet with a slight slope. Corner shower, montage of which own hands to produce quite realistic, is simple in a constructive and easy to assemble. The main thing is to observe the sealing, bias and check the quality of the connections.

Secrets of installation that you should know

If you plan to equip the shower corner with your own hands, you need to take care of the doors that are suitable for it. The main stages of erection are as follows:

• Installation of the wall profile, its alignment in the vertical plane.
• Mark the points for future drilling.
• Holes should be done carefully, to avoid the appearance of chips or deformation of the tiles.
• The depth of the workpiece must correspond to the size of the fixing dowels.
• Then the shower door is mounted. For added security and to prevent damage to the product, it is advisable to work with one or two assistants.
• Cloths are fixed on the pre-mounted profile.
• In the end, the entire system must be checked for legal capacity.

Screw contacts should not be tightened as much as possible to avoid deformation of the glass.

Shower Enclosure with slope

Make a shower corner with your own hands is not so difficult, but if you consider that the arrangement of an inclined floor will ensure an uninterrupted water stack, then you need to follow certain rules. It will be necessary to consider the following points:

• It is necessary to equip the floor in the floor, which will help to install the sewerage unit.
• Before the finish lining of the structure, it is necessary to seal all seams and crevices carefully.
• Take into account the fact that the structure of the floor includes a screed, a heater, a waterproof and a finish coat.
• The tile is mounted identically to the slope that the screed has.

The design of the floor with a slope will avoid the accumulation of water in the bathroom, make it easier to clean in the room, will give the opportunity to pick up the sizes individually, not being guided by the overall standards of the pallets.

The result

In conclusion, it can be noted that the shower enclosure without a pallet with its own hands is not much more complicated to equip than to install a ready-made version. Will demand sharpness, time and patience, but the end result will please you for a long time. At the same time, you can recreate the shower cabin at your discretion, taking into account the financial possibilities, the flight of fantasy and the features of the room.