How to ride a box machine on the city and for its features?

Every year the automatic transmission becomes more popular among motorists. Of course, with such a transmission it is much easier to move around the city, especially in traffic jams. Do not constantly press on the clutch pedal and tear the handle of the gearbox. After buying a car with an automatic box , you first need to adapt to it, especially if you used to drive a car with manual transmission. It is mechanically possible to switch the handle to the wrong position, press the brake or gas instead of the usual clutch pedal. As a rule, you can get used to driving a car with automatic transmission in a few weeks or even days, and in order for this period to pass as soon as possible, you need to know at least theoretically how to drive a box on the box. In today's article, we will tell you more about this in more detail.

How do I drive an automatic machine on a box?

Before starting the ignition, you need to make sure that the gear lever is correctly positioned. The handle must be in the "P" mode - parking (the same as the handbrake) or "N" - neutral (on machines with a manual transmission it is neutral transmission). After turning the ignition key, you can safely continue driving. Remember that if the gearbox knob is turned on in another mode, it may cause the engine to shut down and even damage the transmission.

Driving with a car in the winter and summer

If the engine starts in winter, it is necessary to warm up not only the ICE, but also the box. This is done as follows. After starting, the box lever is entered in the "1" mode, then in 2-3 seconds - "2", "3", and then the "drive" (D) position is turned on. All switching should be done with a small interval of time, usually in a few seconds. After you have engaged mode D, hold the brake pedal in the clamped position for 1-2 minutes and proceed with the movement.

Remember that all these stages are made in order to warm up the transmission. In summer, at plus temperatures, you can safely start the engine and immediately turn on the "drive" mode, without any expectations. After the gearbox knob is set to the desired position, gently release the brake pedal and then press on the gas. The machine itself will go, without any effort. It is important to remember that movement on a car with an automatic box should be made only when the brake pedal is fully released. If both are involved, this can lead to transmission failure.

How to drive an automatic machine around the city on a box?

The city can vary the modes depending on road conditions. On each car with automatic box there are modes 1, 2 and 3. These transmissions are needed in order to reduce the load on the engine at high speeds. These modes can be compared with transmissions on "mechanics". Agree, it is unlikely that an ordinary car will go on the 1st gear at a speed of 40-50 kilometers per hour, when the arrow of the tachometer is in the paint zone. But at the 3rd stage both speed and speed will be optimal. At speeds up to 60 km / h, it is recommended to use one of the two modes - "D" or "3".

How to drive a box machine in the country?

Similarly, act on the country road. Mode "D" will provide good dynamics to the car and thus will not create additional load for the engine in terms of speed.

So, we have considered the basic principles of auto control with automatic transmission. As you can see, driving instruction on the automatic box can be passed independently.