How to level the walls with plasterboard when doing apartment repairs?

Curved walls with waves from the material that has been shaken from time are able to inspire only seasoned sailors and lovers of antiquity, but for a modern room they definitely do not fit. If you decided once and for all to finish with all this disgrace, then you should read our article! So how to level the walls with plasterboard? To begin with, you need to know that in this case two standard methods are used: with a frame and without it.

As it is easy to guess, in the first case sheets of material are attached to a specially created for the sake of such a case basis. Easier and faster to stick them directly to the wall (frameless way), but in this case it should at least slightly differ from the surface of the old tankcade. So, they often prefer to level the walls with their own hands with plasterboard, constructing a frame. As a rule, it is made of wood, but this material has a number of annoying technical flaws:

• Strange as it may seem, but this design is much more difficult to install.
• Unfortunately, it is often forgotten about thorough drying of the material, as a result of which the wall can go exactly the same waves that were on it before repair. A crumbling pieces of gypsum will make the question of how to level the walls with plasterboard, simply irrelevant.

Thus, when repairing it is highly advised not to save on suppliers of consumables. Where it is more reliable and easier to assemble a metal profile, which also has better reliability and durability.

In addition, with the help of metal repair can be carried out in a room of any purpose and operation mode. Moisture is not afraid of this material, so that even with changes in daily temperatures in the room and the formation of condensation, you do not have to worry about the condition of your walls. Do you still reflect on how to level the walls with plasterboard? First of all you need to buy guides and rack elements. Do not forget also about the quality of the building level, angle bracket, roulette and screws.

First, to the floor and ceiling, it is necessary to tighten the guide profiles, properly aligning and securing them, then you can proceed to fixing the racks. Be sure to remember that their step should be made equal to the width of the sheet of material. Since it is possible to correctly level the walls with plasterboard only with the accurate adherence to the technology, forget about haste. A proverb about seven dimensions in this case becomes extremely relevant.

After the assembly of the frame itself, it is necessary to start fixing the sheets of plasterboard. It is best to use for this standard black screws, which are made of oxidized metal. As a rule, a length of 25-32 mm is enough. For every 30-40 cm of space, one screw is taken.

That the places of joints between sheets do not resemble meteoric craters, they need to be putty. First of all you need to process the places where you screwed the screws. Repeat the procedure using a special mesh that will prevent the putty from dropping off. Your wall is ready! So you learned about how to level the walls with plasterboard! There is nothing complicated in this, and therefore even a beginner can easily cope with this.