Furnaces for the bath with their own hands made of metal: features of the construction

The oven in the bath is the main element that provides heat and steam. It can be made of brick or metal. Both the first and second option can be built independently. It is only necessary to draw a drawing of the structure correctly and select the appropriate material. In this article, we will look at how to make a sauna for your own hands made of metal.

The advantage of this design is the rapid heating of the room, although it can be somewhat uneven. During operation, the safety rules must be carefully followed. That is, the structure must be at least 50 cm from the nearest partitions, and a protective structure must be built between the wall and the furnace.

Furnaces for the bath with their own hands made of metal are built quickly. It is only necessary to have some skills in marking and welding. The body of such a structure can be made of sheet metal or a pipe. In this case, the product can be combined, that is, some of its parts can be rebuilt from the brick.

Furnaces for a bath with their own hands made of metal are built taking into account the fact that they should be as tight as possible. In order for them to look beautiful, you can overlay them with a brick. In principle, much more welding is required to construct a sheet metal structure than for a pipe structure. The metal from which the main element will be made must be heat resistant. The diameter of the pipe for the furnace should be at least 50 cm. Before building the structure itself, you should choose the right place. It should be noted that an easy foundation is also needed for this design.

Furnaces for a bath with their own hands made of metal are built quite quickly. You just need to cut a piece in length of 1.5 m, and the product should be divided into parts, the bottom of which should be much shorter than the top. In the pipe you will have to make a cutout for the bluff. Its dimensions are 20 * 6 cm. A sufficiently thick metal plate must be mounted above the hole shown. At the same stage, the grate should be secured in the ashtray. This is done by welding.

In the furnace from metal for a bath the obligatory arrangement of a furnace is provided. To do this, simply cut the corresponding hole in the pipe, to which a door is made of the same material. It should be attached to the hinges and have a latch. Naturally, this design should have a chimney. It can be made from a pipe of smaller diameter. Take care that there is excellent ventilation in the room. In addition, the design of the furnace must be so correct as to prevent the occurrence of carbon monoxide inside the bath. A special area for heating stones must be placed above the furnace. In principle, it will be enough just to weld a piece of grating. Naturally, all parts of the furnace must be separated from each other.

A stove in a metal bath can be made from a metal barrel. There are no particular differences in the manufacturing process. The furnace can be additionally equipped with a water tank. This design performs several functions at once, so it is more efficient.