Water repellent impregnation to protect your home.

What do you think is the main threat to any structure? Correct, atmospheric precipitation. To be more precise, moisture in the form of rain, snow, condensation.
Such building materials as concrete and red brick have significant water absorption. Than it threatens?
Many of you have seen how a glass bottle with water at minus temperature flies into small pieces. This happens because the liquid, crystallizing, significantly increases in volume. Something similar happens with a brick, concrete or stone when the pores are saturated with moisture. Despite the sufficient strength of these materials, they can not withstand the internal pressure of such force. As a result, microcracks are formed. As a consequence, the walls of the building are gradually beginning to deteriorate. From the facade lined with veneers, formed vysely. In addition, from excessive humidity, as is known, there are fungus and mold. How to secure the finished structure from such a scourge?
It is for this purpose and is intended water repellent impregnation for facades. Concrete, plaster, slate, brick, natural or artificial stone, after treatment with such a composition simply ceases to absorb liquid. In addition, water repellent impregnation for facades has decorative properties. With its help, you can simulate the effect of a wet stone or a smooth glossy surface.
A little advice: to calculate how much impregnation is required for facade works, buy a small container and test the composition on a plot of 50 x 50 cm. All materials have different absorbent properties, which means that the consumption will be different.

High humidity takes place not only outside, but also inside the building. Take at least an ordinary bathroom in a city apartment. As a rule, the shower is located in the immediate vicinity of the wall, and water simply flows down it. Of course, if the surface is covered with oil paint, there is no danger. But in fact more often in furnish of walls of a bathroom use a ceramic tile, and seams fill up with a concrete mix. And in this case, water repellent impregnation will greatly help, in addition also protect the fungus. The product is suitable for work inside and outside the building. The time of formation of the protective coating is about 24 hours. Use a hydrophobic material exclusively on a dry surface.

Well, now is the time to talk about the material that any domestic master has worked with. I mean the tree. This wonderful natural material has a lot of positive qualities: not high cost, environmental friendliness, beauty. But, unfortunately, everyone knows how short it is. In the work with wood, water repellent impregnation is used without fail. This is the only way to avoid rotting the material.
Traditionally, impregnation on wood is made with linseed oil, which is applied to the surface in several layers. To ensure the waterproofing of structural elements located under the ground, they are often impregnated with tar. However, to date, manufacturers offer many more effective, modern, high-tech tools. For example, water repellent impregnation for wood from the company "Cork-S". It not only protects the material from the effects of atmospheric phenomena and biological factors, but also significantly improves its decorative properties. If you wish, you can turn ordinary pine into an expensive rosewood. In any case, at first glance, they will not be distinguished.
Impregnation is applied in two to three layers on a dry, cleaned surface. It is desirable to update the coating at least once every two years.
Proceeding from all stated, it is possible to draw a conclusion, that water-repellent impregnation allows to prolong term of service of inhabited buildings and economic constructions, and also considerably to save on their capital and cosmetic repair. In addition to protection from moisture, it performs a decorative function, making the surface more attractive.