Tile polymer-sand: photo, styling and reviews

Tile polymer sand is an analog of natural tiles. But this material can be called qualitatively new. This roof covering is more advantageous than analogues in many characteristics. Consider everything in order.

Reviews

The material described is 2 times lighter than natural, but it costs much less. With the help of such a coating, it is possible to provide much better quality of heat and noise insulation if we compare with metal roofing. Consumers especially note the absence of corrosion processes. It is impossible not to pay attention to strength characteristics.

Tile polymer sand is popular among private masters and professional builders also because of resistance to ultraviolet radiation. It can be operated with significant temperature changes, the range varies from -65 to +100 degrees. Owners of private houses that used as a covering material described, note that during the entire life of the coating retains its attractiveness. Manufacturers guarantee that the complete decomposition of film based on polymers will take about 100 years.

Reviews on moisture absorption and heat conductivity

If you chose polymer-sand tile, then you can count on a small water absorption coefficient. This indicates that this material will cope with the function of protection against moss, fungus, mold, as well as the effects of moisture and acid rain. This material is distributed on the market also for the reason that it has low thermal conductivity. This indicates that in the space under the roof will be maintained a constant temperature regime. Under such a roof it will be warm in winter and cool on a hot summer day. Therefore, polymer-sandy tile is used in the arrangement of terraces and mansards.

Reviews about soundproofing and impact resistance

Experts advise to choose the described material because of a set of useful characteristics (by the type of insignificant thermal conductivity and water resistance). This becomes a reliable barrier to condensation. Consequently, the roofing structure is protected against destruction, which particularly applies to wood elements. Owners of private houses try to choose materials that are different in sound absorption before the roofing. When laying a polymer sandwich roof, additional sound-absorbing interlayers will not be needed. The roof will be noiseless in any weather. You can also count on impact resistance. Companies involved in the transportation of building materials, note that polymer sand tiles, reviews about which are often only positive, do not beat during transportation and packing. It meets the standards and requirements of sanitary, fire and radiation safety.

How and what to mount polymer sand shingles

Installation of polymer sand shingles can be made independently. The manufacturer took care of this, having equipped the back side of the cloth in the upper part with a special protrusion, which is necessary for fixing to the crate. Among themselves, the components engage with the help of side locks, which makes it possible to form a continuous carpet, which is called a roofing covering. Polymer sand shingles, the photo of which is presented in the article, has in each element technological holes (in the number of two).

Work should begin from the bottom row. The fixing system should not be rigidly applied to the grid system - each fastening should have a backlash. Then you will ensure the possibility of free movement, which is necessary for deformation expansion under temperature influence. Among other things, the roof must sense the load from wind, snow, and other natural factors without deformations.

Features of installation work

Laying of polymer sand tiles should be done in such a way that after fixing on the front side there are no rust stains. In order to eliminate this phenomenon, galvanized nails or anodized screws should be used as fixing elements. Nails are more preferable, as they speed up installation work, and are also able to provide not too rigid fastening. With regard to the wind, or, as it is also called, pediment tile, as well as skate, these elements are strengthened with the help of anodized screws. In the process of work, there will certainly be a need for cutting the material, for this you can use a hacksaw designed for working on metal, or a Bulgarian.

Recommendations of professionals

Start the work with the trussing system. It should be remembered that the total weight of the roof will be quite significant, despite the fact that the described covering material has a negligible mass, because the system will have a system of crates, as well as rafter legs. For this reason, consideration should be given to calculating the cross-section of the beam, taking into account the loads that will be placed on it. This includes external temporal influences such as snow, wind, etc.

The most common for the wire is a square beam, the side of which is 50 millimeters. In the course of the device, the flooring should be covered with steam and waterproofing. These layers are needed to protect the roof from weathering and to avoid humidifying the components. This insulation will not interfere with air circulation between the elements.

Conclusion

Choosing steam and waterproofing, you can use a special insulation film, which is also called diffusion. To the grate it should be fastened with the help of staples of a construction stapler, it may have to be rented. Some home masters refuse to use these layers, while experts insist that they are present.