Making a shower for a wooden house

Many of us in the summer heat rush out of the city, especially if there is a plot of land there. Rest in the shade of trees, swimming in the river, the opportunity to sunbathe and cook a barbecue is a set of activities that have become traditional for summer residents. However, such pastime will be incomplete if you do not have the opportunity to take a shower at the end of such a busy day. And then the question arises: where to do it? It is possible to offer such a convenient and practical solution as a shower for a wooden house. If this option is interesting for you, read on.

Where it is better to install a shower for a wooden house?

From the correct choice of a suitable location depends entirely on the convenience of operating the shower. The best option will be the location where there is usually no draft or wind, as this can cause a cold after the shower. The ideal place will be where there is an abundance of sunlight. It is worth remembering that a shower for a wooden dacha should have a territory for draining the water, there should not be any obstacles for this.

Important points

As for the drainage pit, you must decide on your own whether to do it or not. The main reason for its creation is a large number of people who will take a shower. If the number of people is 2-3, then a pit will not be required. With a larger number of people it is worthwhile to build it. At the same time, there will be enough volume in 2-3 cubic meters. It is better not to place a shower for the dacha wooden next to a gazebo or other structure for rest. This is due to the fact that mosquitoes and mosquitoes often appear in stagnant waters. For such a shower, there is no need for a sewage system, since the water consumption in it is rather small. The wooden grate, which serves as a stand, can be sintered, after which it should be impregnated with a special compound.

Wooden shower for the villa is quite easy to build. It does not take much time and effort. In modern building stores are presented all the necessary materials and tools. Here you can note the following stages of construction. First you need to make a pallet, which then lined ruberoid. It can be concreted. It is worth making a shower for a dacha in size not less than a meter per meter. After that a drainage pit is made , which is located a few meters from the shower. Around it, you need to make a drainage, and its walls - to strengthen. From the cockpit to the sinkhole, it is necessary to organize a drain, and its trough is made of waterproof materials. The gutter with the pallet must be connected by means of special fasteners. Lighting should be placed near the shower, but not inside for safety reasons. On top, a water tank should be installed.

Around the sinkhole, it is appropriate to plant shrubs or plants that love water. They can quickly take all the moisture from the ground, preventing rotting processes, which will not cause unpleasant odors.

The walls of the shower are covered with a tree. This material is the best option due to its properties. You will be pleased to wash in such a shower.