Instructions for the installation of metal. Main stages

Metal tile is one of the most interesting modern roofing materials. Its installation is very simple. A set of roofing of any company is often accompanied by an instruction for installing metal roofing. It describes in detail the stages of work. Sometimes there is no such instruction. In this case, there will also be no difficulties. On the Internet, a lot of information on this topic. There are even special educational videos.

Elements of kits of different companies may have some features, so the installation of metal tiles will be special. The instruction is also attached to the kit so that the consumer can immediately understand all the nuances.

Below we will consider the main steps and mandatory rules that must be observed when installing metal tiles from any manufacturer.

A brief instruction for the installation of metal tiles includes several items:

1. Waterproofing.
2. The device of the controller.
3. Installation of the lower bars of gutters, ends and aprons for pipes.
4. Installation of eaves, drainage.
5. Installation of sheets of metal tile.
6. Fastening of decorative elements.
7. Installation and installation of ventilation elements.
8. Installing the ridge element.

In addition, any instruction for the installation of metal tiles offers to prepare a set of tools necessary for the work. The minimum set should include metal scissors, a screwdriver with a screwdriver, a tape measure, a twine, a gun for applying sealant, a stripper and tongs.

The first thing is arranged hydro and vapor barrier. For this purpose, a special film is used, which is fixed to the beams of the crate. Mounting starts from the end. The tape from the film is rolled for the entire length of the valley. Then roll and tape the tape along the entire ramp, horizontally, starting from the bottom. In doing so, you need to do an overlap. The joints of the tapes horizontally are glued with adhesive tape.

Then the instruction for the installation of metal tile of any firm involves the installation of a control unit. It consists of bars 50 to 50 mm and is attached to the bars of the main crate. After that, the boards are horizontally packed with boards. The step between them must correspond to the step of the metal tile.

The next stage is the installation of the lower laths of the grades. After that, mount the lower aprons of the pipes. Install the holders of the gutter gutter and insert the gutter into it. After that, fix the cornice.

Then the metal tile itself is installed. The installation instructions for the sheets are also quite simple. They are laid overlapping, fixing them on the control panel with screws, in staggered order, through two waves.

After all the roofing is covered with sheets, decorative upper strips of hands, aprons for pipes, as well as a ridge strap are mounted. The latter is laid with a sealant. Then you need to install ventilation elements. Under them in the sheets of metal and film make holes of the appropriate size.

Metellecherepitsa is distinguished by its high strength, resistance to corrosion, and therefore durability. This is aesthetically attractive, safe for health and easy to install inexpensive material. All this explains its relevance.