Industrial grease traps: purpose, scope, installation methods. The grease separators of the trademark "Alta Group"

The process of cooking is associated with the consumption of oils and fats. As a result, the load on the sewerage network increases, and this, in turn, leads to plugging of pipes. Currently, the supervisory authorities have tightened control and require that public catering enterprises and food producers clean up drains from fats before they enter the sewerage network. Special devices allow this.

Industrial grease trap: introduction

The industrial grease trap is a rectangular or cylindrical container made of polypropylene. Inside the tank there are partitions dividing the structure into two or more compartments. In the first chamber large particles settle on the bottom, in the second - the sewage from the fats is purified.

Industrial grease traps differ from domestic, mounted under the sink, efficiency, productivity and large dimensions. As a rule, the device has two types of installation: ground and underground. Installation of the latter is done through a special hatch.

Ways of installation

Above ground grease catchers are installed in basements or ancillary rooms, taking into account the convenience of maintenance and unobstructed access to the installation. They are connected to an industrial sewerage network. The sludge is pumped out using a sewage machine. For this purpose, the equipment is equipped with special discharge pipes.

The grease trap industrial underground is installed in the ground vertically, leaving only a technical hatch outside. Horizontal installation is also possible, depending on the nature of the sewage network, the volume and other conditions.

Scope of application

These structures are inevitably installed in chemical, cosmetic and food industries:

• Soap making;
• Fish;
• Confectionery;
• Bakeries;
• Distillery and other plants.

In addition, the grease trap industrial for sewerage is in demand in large catering enterprises, where household devices for washing can not cope with their functions.

The frequency of maintenance of these devices depends on the degree of contamination. Terms can be set in the process of operation individually by the consumer. In some designs there is an alarm sensor or an optional automatic system for dumping contaminants from the grease trap.

Company "Alta Group" - manufacturer of grease traps

One of the most popular manufacturers of fat separators for domestic and industrial applications is Alta Group. It uses durable and environmentally friendly materials (non-corrosive, ground pressure, weather and corrosive environments) in production and offer a wide range of both ground and underground versions.

The industrial grease separators of the Alta-M-OR range have a round design, which makes it convenient to mount them into the soil in concrete rings or directly into the ground, provided that the installation technique is observed.

ALTA M-OR 3.6-240

ALTA M-OR 3.6-240 grease trap is the youngest model with compact dimensions and light weight. It cleans the drains from fats of non-emulsified nature and from oils with an efficiency of 1 l / s. This model is perfect for use in small catering establishments, where a one-time discharge of effluents does not exceed 240 liters. Also, this model can be used in private homes (in the event that there is no desire to put a separator of fat under the sink in the kitchen). The installation has all the necessary certificates SanPiN.

Specifications

The grease trap industrial ALTA M-OR 3,6-240 has the following technical parameters:

• Weight, kg - 42,0;
• Diameter of pipes, cm - 11;
• Efficiency, l / sec - 1;
• Efficiency, cubic meters / hour - 3,6;
• Limiting simultaneous discharge, l - 240;
• Dimensions, cm - 95.5 • 150.

ALTA M-OR 7-500

The peculiarity of the grease trap ALTA M-OR 7-500 is that it does not need constant tracking and maintenance. This fat separator has a round configuration and is designed for outdoor installation. Such a convenient shape makes it easy to mount it in concrete rings. For greater stability of the system, industrial grease collectors of this brand have mounting lugs, with which additional fixing to the concrete base is made. The company "Alta Group" can make the device to order the configuration that will be most suitable for installation in concrete rings.

The grease separator ALTA M-OR 7-500 is made of steel low-carbon alloys or polypropylene. These materials are resistant to ground pressure, they are leakproof, do not corrode, are reliable and wear-resistant.

Principle of operation of the ALTA M-OR 7-500 device

The principle of the grease trap consists in gravitational floating of fat on the surface. The device has two internal compartments: in the lower one, heavy impurities are collected in the drains, and in the upper one - thin-layer modules, a container for storing collected fat and pipes.

Industrial grease traps ALTA M-OR 7-500 have the main advantage, which consists in the high efficiency of cleaning effluents from fats of non-emulsified nature and oils. They account for 99% of all pollutants, and this fact is confirmed by the relevant certificates. The water leaving the plant can be discharged for further purification to a local or central water disposal network.

Characteristics of ALTA M-OR 7-500

This device has these technical parameters:

• Weight, kg - 73,0;
• Diameter of pipes, cm - 11;
• Efficiency, l / sec - 2;
• Efficiency, cubic meters / hour - 7,2;
• Limit simultaneous discharge, l - 500.