How to glue the ceiling skirting with your own hands?

If you want to glue the ceiling skirting, but as it is best done, you do not know, then we suggest that you familiarize yourself with this process. Many people think that there is nothing particularly complicated in this task, but as soon as it comes to doing this work, a lot of questions immediately appear. Therefore, to make them as small as possible, we will try to open the topic as fully as possible.

First of all, it would not hurt to understand what is a ceiling skirting and "what it's eaten with". In fact, the more correct and scientific name of this decor element is a fillet. Paste it between walls and ceiling, after which the connections between them are puttyed and painted. Designed fillets in order to hide minor flaws after gluing the wallpaper, as well as give the room a more complete look and simply decorate the ceiling.

And now let's go directly to the question of how to glue the ceiling skirting. First of all, you need to know the consumption of materials. To do this, you need to measure the perimeter of the room and determine what width of the fillet you want to see on your ceiling. But even if you know the area of the room, try to buy a plinth with a margin, because it will have to be cut, and you can inadvertently make a mistake.

Next you need to decide which of the two ways you are going to fix the fillets: they can be glued directly to the wallpaper with glue, or you can use the putty before the wallpaper is pasted. The first way how to glue a ceiling skirting board is more simple and convenient in its performance, because it allows you to make an imperfect joint when wallpapering, which eventually closes the fillet. Secondly, gluing the fillets with glue is much more convenient than using a putty. But there are disadvantages to this method: firstly, it is more expensive, and secondly, you have to glue, putty and paint the plinth so neatly that none of the solutions hit the wallpaper. Experts believe that the second method, how to glue the ceiling skirting, is much better, because the dirty work takes place before the wallpaper is pasted, and the fillet looks more effective. But to choose, of course, you.

Beginning of the skirting is always necessary from the corner of the longest wall, and it is here that some problems begin to arise: before you spread the fillet with glue or putty and attach it to the right place, you must first cut the corner. This will require a hacksaw and a stool. For those who do not know: a stool is a special device in the form of a tray, designed for cutting beams and various boards at a certain angle. If there is none, and you do not know how to glue the ceiling skirting in the corners, use a regular sheet of paper. Its angle is 90 degrees, and since you will need to cut the edge at an angle of 45 degrees, simply fold the sheet so that the fold line passes through its corner, and the edges of the paper exactly match. So you get a landmark that you can use to make an accurate pruning of the fillet. But even when you cut it off, do not rush to stick it in, just put a plinth on the wall once more, to make sure that there are no errors. And if there is, then they can always be corrected.

Now that all the corners have been adjusted, you can start sticking. If you glue on the putty, then remember that it should be thick enough in its consistency, this ensures the adhesion strength, therefore, the fillet will not fall on your head once. Apply a skirted blended mix to the corner between the ceiling and the wall and press it well so that the excess solution "extrudes" outward. Then everything else is simply removed with a spatula and a brush moistened with water, and the joints after drying of the adhesive composition are either neatly puttied or sealed with a special silicone sealant. If this is not done, the fillet will look very sloppy and will only spoil the overall appearance of the room. Knowing how to glue a ceiling skirting board, you can easily do it yourself, which will significantly save your family budget.