Glue "Bustilat": characteristics, application

"Bustilat" is a synthetic universal building glue that is designed for gluing wallpapers, carpets, fiberboard, particle board, asbestos-cement and fibreboard, ceramic and polymer tiles, linoleum. Glue "Bustilat" allows you to seamlessly connect the walls, floor and ceiling with the elements of decor and do not spoil them with extra holes. The adhesive is intended only for internal work.

Composition

Glue "Bustilat" consists of vinyl latex, chalk, thickener, modified cellulose, water, preservative and other special additives. Bustilat looks like a greyish-white mass, which has a creamy consistency.

Types of glue

In addition to the traditional glue, which is familiar to our parents, today many of its improved varieties are produced, which differ in their properties. They have different frost resistance, heat resistance, resistance to moisture, etc.

So, consider the glue "Bustilat", application and varieties.

• "Bystilat Omega" is used, as a rule, for floor coverings or wall finishing with materials that have a base of fabric, felt or pile. Also it is used for carpet, textile wallpaper , etc. In addition, it is suitable for materials made on paper basis. However, it has a rather poor adhesion to poorly absorbent PVC products, as well as enameled metal, etc. This adhesive is also used for gluing off fallen tiles or wood products. It has the property not to permeate through the fabric materials, due to which no spots appear on the other side.
• "Bustilat-M". Has good adhesion to many types of materials for walls, floors and ceilings. These include concrete, masonry, plaster, putty, whitewash, wood, plasterboard and ceramics. It includes frost-resistant additives. It is designed for gluing carpets, linoleum, various types of tiles, wallpaper. In addition, it is used as a primer.
• "Bustilat-N". This adhesive is characterized by enhanced adhesion. Used for fixing materials that are difficult to stick to. These include heavy wallpaper (non-woven or glass), linoleum without substrates, synthetic carpet coverings, etc. The glue does not lose adhesive abilities in the deformation of structures, since it is quite elastic even after solidification.
• "Bustilat-D-super". There are several of its varieties. Applied for gluing polymeric materials having a smooth surface. This glue is not toxic, not combustible. Applied for fixing wallpaper, beznovnovogo vinyl linoleum. It does not allow the development of fungus, mold or any other biological microorganisms. However, at the same time, it does not have a harmful effect on human health. Glue "Bustilat" refers to an economical option for performing repair work and is a good enough replacement for some more expensive imported materials.
• "Bustilat-Lux". It is used for fixing polymeric materials, such as polyvinyl chloride film, linoleum, etc.

Glue "Bustilat". Application

Any kind of glue must be used according to the instructions.

The instructions for using the adhesive are fairly simple and understandable. It is attached by the manufacturer to each glue pack for the convenience of the buyers of this product.

Surface preparation

The surface to be treated is previously cleaned of dirt and dust, and there are traces of old material. Then it is leveled, shpaklyuetsya and cleaned to a smooth state.

Porous surfaces are treated with a special primer, in order to improve adhesion, as well as preventing the appearance of mold and various fungi.

Application of glue

Before using the glue, it is thoroughly mixed.

Applying glue "Bustilat" for linoleum and wallpaper is quite simple. First of all, it is measured and cut into pieces of the appropriate size material.

Using brushes or a roller, the application of the substance on both surfaces is carried out.

After waiting about 10 minutes, until the glue dries a little, combine the material with the surface and presses it for 24 hours. It is very important to remove all air bubbles from under it, using a dry towel or special plastic spatula.

After the work is completed, it is necessary to protect the room from a draft for a day.

Glue "Bustilat". Characteristics

The weight of the glue in its working condition is white or grayish. After it dries, it becomes transparent. Does not have a characteristic smell. It does not show yellow spots even through the thinnest material.

Refers to a strong peel for environmentally friendly and fireproof adhesive.

Clay "Bustilat", the consumption of which is rather low, is quite economical. At 1 square. Meter in one layer will need from 80 to 250 g.

Complete drying at t = + 20 C occurs after 1-1.5 days.

Due to the large life cycle it allows to correct minor flaws.

Its composition does not contain alcohol, so it is not a flammable glue, which is not afraid of open fire.

The composition of water is included, so when it freezes it freezes. For this reason it is only used in heated rooms or during the warm season. After drying, the cold is not afraid.

Despite its multifunctionality, the glue "Bustilat" is mainly used for wallpapers. This adhesive composition was used even in Soviet times and as before does not yield to its positions. Everyone knows that if the repair is carried out correctly, the material can be kept long enough. For this reason, many still continue to trust the time-tested glue, which also has a much lower cost than any analogues.

Glue "Bustilat", the characteristics of which are indicated above, has a very good adhesion, low price, it has no smell, it is non-toxic.

Precautionary measures

Since this synthetic substance is made on the basis of chemical compounds, it is very important to observe certain precautions when working with it (especially when using glue regularly). It is always necessary to wear gloves made of polymer materials when performing work, and also to ventilate the workroom well. In case of contact with the substance in the eyes, they must be washed thoroughly with clean running water.

Packaging

Glue "Bustilat" is packaged in plastic containers weighing from 1 kg, as well as in plastic buckets of 18 kg.

Storage

Glue "Bustilat" is stored in a tightly closed container and in a place protected from high temperature.

For this substance, multiple freezing (up to 5 times) with further thawing at room temperature is permissible during transportation and storage.

Before use, the substance is thoroughly mixed.

The shelf life in the factory hermetically sealed packaging at an ambient temperature of + 5-20 degrees C is 12 months from the date of manufacture.