HomelinessRepairs

Flushing paint for metal: description and reviews

If you decide to upgrade the old paintwork, then for the repair work you will need a wash. This method today is one of the most effective when it is necessary to remove the old decorative layer. Removal does not remove the coating, but only softens it, after which it will only be necessary to treat the surface with a spatula. The washing compound will not cause any harm to the base, it will affect only the paint and varnish coating. That's why you can not be afraid that a metal product or surface will be damaged. However, the master should use personal protective equipment.

Description of different types of washings

Flushing paint on metal can relate to one of several varieties. On sale it is possible to find preparations for removal of oil and water-emulsion paints, there are also universal compositions, and also mixtures for removal of powder coatings. If the work needs to be done in the shortest possible time, then an express wash should be purchased. After its application, the paint layer softens and begins to peel off, its adhesive characteristics are reduced.

The rinsing agent acts until it evaporates, for this reason, in one approach, a thick layer of paint will be removed quite difficult. In this case, the drug is applied in several layers, until the paint begins to peel off.

Additional Ingredients

In order for evaporation to slow down, the composition includes substances that act as inhibitors of evaporation processes, in this case we are talking about paraffin and wax. These components reduce the consumption of the mixture, but lead to another problem, which is expressed in the deterioration of the adhesive characteristics of the metal itself. The material does not adhere to the new paintwork, so after proper treatment it is necessary to thoroughly wash the surface. Sometimes the remover of paint on metal can not be removed with the help of ordinary water, you have to use not only a cleaning agent, but also chemistry by the type of acetone. Recently, washings have been realized that do not contain paraffin and are replaced by new generation evaporation inhibitors. Mixtures are made in the form of gel-like pastes. If you acquire this mixture, you can take advantage of the advantage, which is expressed in the possibility of applying the composition even on a vertical surface.

Reviews about the expense

According to buyers, the remover of paint for metal usually does not have too high a cost, but if you have to handle a fairly impressive area, the expense can be significant, so many buyers try to calculate the consumption of the substance. Users note that this parameter will be affected by many factors, including a variety of colors, the number of layers, and the temperature of the outside air. When deciding on the expense of washing, it should be remembered that more funds will be needed to remove the oil coating. According to the buyers, when calculating the washing rate, it must be taken into account that the thickness of the wash layer should correspond to the thickness of the finishing layer. But if the paintwork was applied in 3 layers or more, and the work to be done in the heat in the open air, then the consumption may increase.

Description of spray paint ABRO PR-600

Flushing of paint on metal ABRO is presented for sale in the form of a spray with which the epoxy resin, paint, varnish, and varnish can be removed from the surface. This mixture is used not only in everyday life, but also when repairing cars. Among the ingredients there are no alkalis, so the composition is safe, it is easily washed off with water. This spray differs speed, it works efficiently and is able to remove enamels, acrylic polyurethanes, nitrocelluloses from almost all types of material, here you can include not only metal, but also concrete, as well as wood. The exception is plastic.

This means for washing paint from metal should be used according to a certain technology, it involves holding the container during spraying in an upright position, it should be removed from the surface by 25 cm. To remove the entire layer of paint in one approach, it is necessary to apply a large amount of washing to absorb it and Softened the layer.

Advice of a specialist

Depending on how many approaches were taken to apply the paint, after applying the wash it is necessary to wait about 20 minutes, after the paint, simply scraped off with a wire scraper or spatula. Sometimes machines for water or air purification are used.

Reviews about the washing of "Prestige"

As an alternative solution, you can consider the washing of the paint on metal "Prestige", it is represented by a gel and is intended for the rapid removal of old paintwork. Use the composition is not only inside, but also outside the premises. As the users emphasize, they like this composition for the reason that it is low-toxic, has a convenient gel-like structure, and also does not flow along vertical surfaces.

It is very convenient that the wash is released in ready-to-use form. Before use, the composition must be mixed and then applied with a brush, brush or roller. You can use a spatula or pour without shading. After the paint has swelled and loosened, it can be removed with a brush or spatula. It is recommended to carry out processing in small areas. Consumers are advised to apply the mixture to an area of 0.5 m 2 . If necessary, the treatment can be repeated, and it is necessary to withstand the composition on the surface much longer. This chemical paint rinse from metal has a fairly low consumption. According to the buyers, only 120 g will be enough per square meter. This parameter can vary, which will be affected by the condition and type of the cover being removed. In order to increase the efficiency of washing, initially on the coating, you should scratch with a spatula or knife.

Description of the Body 700 wash

If you need to wash the paint for metal, you can pay attention to the Body 700, which is produced in aerosol cans. Remove with this composition can not only varnishes and paints, but also latex materials. The mixture is based on organic solvents, as well as paraffin. The remover does not have an aggressive impact on the surface. Using the spray can also clean the working surfaces of equipment and tools. In the process of work, you can apply the mixture to galvanized, stainless or chrome steel, as well as aluminum.

Quite often, these mixtures are used for application in hard-to-reach places, this can be attributed, for example, to the painting of machine disks. After spraying, the agent is left on the surface for about half an hour, then with it the paintwork is removed with a napkin. Such washing of the old paint from the metal should not be left on products and grounds longer than the recommended time. Do not expose direct sunlight to the surface when working with the product. You may be interested in some characteristics of the wash, for example, the density, it is 1.3 kg / l. It should be remembered that the composition is flammable, its ignition can occur at a temperature above +35 ° C. The aerosol can is stored at a temperature range from +5 to +35 ° C, with humidity not exceeding 80%.

Description of the remover for the powder paint "Antikras-P"

If you need a remover for powder paint from metal, you can pay attention to "Anti-P-P", with the help of this tool you will be able to remove all kinds of powder coatings. It is very convenient that this mixture does not flow off vertical surfaces, and also excludes occurrence and development of corrosion. Ingredients include corrosion inhibitors, complexing agents and thickeners. Washing is used to remove old layers of paint from non-ferrous and ferrous metals. The coating can be made on the basis of epoxy, polyacrylate, polyester, as well as polyurethane resins. This remover for removal of paint from the metal is represented by a thixotropic viscous pasty mass. Depending on what type of paintwork to be removed, the wash can be diluted with water, adding it in an amount of 10 to 20%, this saves.

Conclusion

Before applying any washing, the surface of the old paintwork is recommended to be cleaned of dirt and dust, this will increase the efficiency of using the composition. Reviews say that the application can be carried out with a brush, as well as with a roller, the specific tool choice will depend on the type of surface. If the area is small enough and has many small details, it will be more convenient to use a brush, but if the area is extensive and level, then it is best to stock up the paint roller. When using a flushing agent in the form of a liquid formulation, it is best to use a spray gun.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.