Furnaces "Student": reviews. Heating furnaces "Student"

The Russian company "Termofor" is engaged in the production of furnaces "Student". Also, this company actively produces various boilers and fireplaces. A distinctive feature of the Student stoves is the large heating area. The tightness of the device is quite good. All this allows more efficient use of the heater.

The heat exchanging pipes are fully flammable during operation. In addition, it should be noted the furnace furnace furnace "Student". Due to this, it is possible to lay a large amount of solid fuel. Food can be heated on the stoves "Student" is possible, but in this helps the top panel, which is perfectly flat and located at an angle of 90 degrees. The grate in all models is removable. If necessary, it can easily be disconnected and the access to the ash box opened.

Reviews about the stove "Professor Butakov Student RV"

This oven "Professor Butakov Student" reviews is good. Many buyers of this model are appreciated for the convenient air regulator. In general, its characteristics are acceptable, the rated power reaches 9 kW. At the same time, it is possible to build a room of up to 150 square meters. M.

As a solid fuel, firewood is used, but you can also use chips. The furnace in this model is a trapezoidal shape. As the buyers note, the door is quite comfortable. Thus, it is possible to load the furnace very quickly with wood. Pipes in this model are convective type. They are installed in the front, as well as the rear of the device. Thanks to this, the process of heating the home is quite fast. The function of prolonged burning in the furnace "Student" is provided.

The chimney in this modification is connected at the top of the structure. Its diameter, as standard, is 120 mm. For the design of the convector, the producers use anthracite. The door in the furnace is completely made of steel and has no window. In this case, this deprives the owner of the opportunity to follow the work of the oven "Professor Butakov Student". It is worth this model on the market 13 thousand rubles.

Opinions about the model "Butakov Student GZ"

This oven "Professor Butakov Student" reviews is mostly positive. This model differs from other modifications by a sealed ash pan. It is located at the bottom of the structure. If necessary, it is possible to push it out for cleaning.

The power of this modification is standard and is 9 kW. This is enough to heat a house with a total area of not more than 150 cubic meters. M. The furnace in this model is designed for 70 liters, and the door in it is provided by the manufacturer steel, without a window. The function of prolonged burning in the furnace "Student" is available, which is also liked by consumers.

As the buyers note, the dimensions of this unit is quite compact. The length of the device is 532 mm, width - 371 mm, and height - exactly 800 mm. In this case, the chimney is installed with a diameter of 120 mm. Pipes in this model are convective type. Ducts can be connected to it. At the same time, they are able to help well to divert heat to other rooms. The model "Student GZ" stands on the market of 13 thousand rubles.

Overview of the "Student DT" model

In general, the data of the Student stove reviews are good. This model is great for people who want to hide the chimney. In this furnace, the outlet for it is available at the rear of the structure. Thanks to this you can conduct a chimney behind the partition. Among other things, it should be noted the high performance of this modification. In many respects this was achieved due to the uniform distribution of gas-guiding flaps. In this case, the pipes are always in a warmed state.

The door in this model is made of steel. Directly below it is a convector. Secondary air jets are located behind the furnace and do not occupy much space. The installation of the "Student DT" furnace is quite simple. As experts say, the chimney needs a minimum length of 5 meters. In this case, its diameter should be 130 mm.

Consumer feedback about the stove "Butakov Student BH"

The data of Butakov's furnace "Student" reviews deserve the most diverse. Some customers liked this model for a large hob. As a solid fuel for the furnace use a tree. The loading window for this model is quite large. At the same time, the door of the furnace is completely made of cast iron. Of the features can be identified glass window near the handle. Due to this, it is possible to monitor the burning process.

In service, the device is fairly simple, and it is necessary to clean the ash box at least once every three weeks. The chimney in this modification is located in the upper part of the structure. The pipes are of a convective type and are located at the rear of the furnace. At the same time, the gas control panels are mounted above them. Thanks to the lock of the door, the furnace is securely closed and sealed. The price for the "Student BH" model fluctuates around 18 thousand rubles.

Stove "Student SG"

As the buyers note, Butakov's furnaces "Student SG" are extremely easy to use. Clear ash can be, without stopping the combustion process. All this became possible thanks to a special drawer. The gas generation system in this model is provided by the manufacturer. Among other things, you should allocate a large capacity device. As a result, this oven is best suited for large cottages with a total area of more than 200 cubic meters. M.

Dimensions of this modification is huge: height - 522 mm, width - 380 mm, and depth - 660 mm. Weigh the oven in assembled form exactly 80 kg. The housing in the "Student SG" is made of steel, but there is a window, with a heat-resistant glass. For the distribution of air ducts, manufacturers have provided a special heat sink. As some consumers note, the stove can quite successfully work on coal. At the same time, performance indicators do not drop significantly. This model will cost the consumer on the market about 16 thousand rubles.

What is the difference between the "Student SK" model?

Heating furnaces "Student SK" can boast a reliable steel grate. At the same time there is quite a large firebox. At one refueling of a fire wood the furnace is capable to work about 13 hours. Load the camera with coal is allowed, but in this case there will be a slight drop in performance. The pipes in this modification are of the convective type. Due to this, the heat lasts a long time. The function of prolonged burning by the manufacturer is provided.

Among other things, you should highlight the possibility of connecting special ducts. In this case, it is possible to ensure the removal of heat to all rooms in the house. The chimney in this model is installed on the rear panel of the chassis. Thanks to this, a large cooking area is released from above. The door leading to the loading chamber is made of durable cast iron. The handle itself is very convenient to use, and thanks to a reliable lock, the furnace can be reliably closed for greater tightness. It is worth changing the "Student SK" on the market about 16 thousand rubles.

Reviews about the furnace "Butakov Student ZhS"

In general, the data of the Student stove reviews are good. For many, this model liked its compact size: length is 530 mm, width - 370 mm, and height - 780 mm. The cooking surface in this modification is not provided, which is distressing. According to experts, in the installation of the furnace is very simple: and for this purpose, manufacturers have equipped the lower part of the construction with convenient fixatives.

The chimney is installed without any problems. Its minimum diameter should be 100 mm at a height of 6 m. The furnace has a volume of exactly 70 liters, this is enough to load up to 17 kg of firewood at a time. The furnace power is 9 kW. Considering this, it is more expedient to install this modification in rooms with a total area of up to 130 square meters. At one gas station, the heating system will run for up to 15 hours. There is a model "Butakov Student ZHS" in the market of about 13 thousand rubles.

A new modification - "Hydraulic Student"

The "Hydraulic Student" furnaces are produced with the gas-generating mode. In this case, the manufacturer provides a combustion control system. The ash box in the device can be easily extended if necessary. In the upper part of the construction area for cooking is available.

The grate in the system is mounted on a removable type, but it is made of steel and is quite strong. With its help, it is possible to control the supply of air to the chamber and monitor the temperature in the room. A clear disadvantage in this situation is its too low location. Given this, you have to lean heavily to change his position.

As a radiator on the door there is a special casing. Due to this, the handle is absolutely not heated, it can be used even with prolonged use of the oven. Additionally, many noted the convenient location of the branch pipe. In this model it is installed in the upper part of the structure. This change made it possible to distribute the capacitor tubes differently. As a result, the productivity of the furnace has increased significantly.

Summarizing

Summing up, we can say the following: the most comfortable model is "Student SK". This modification can be successfully installed in dachas, as well as in large houses. The capacity of the furnace is good, while the consumption of solid fuel is acceptable. Given this, you can save a lot on heating the home. What, in fact, and mark in all their feedback users.