Furnace "Thermophore" for home and bath: characteristics, installation. Reviews of wood-burning sauna furnaces "Termofor"

The company "Termofor" today is considered the leader among domestic manufacturers of furnaces for steam rooms and heating devices intended for oversized rooms. Choosing the oven "Termofor", you can use a wide range of models presented in the stores of the corresponding goods. Among the main advantages of this product can be identified functionality, versatility and complete safety of operation.

general description

When choosing a thermoform oven, you should know that this product is represented by a number of model lines, and among their main advantages, you can especially highlight the durability, reliability, safety, convenience of operation, modern design, democratic cost and the feasibility of installation in any room. Each model is characterized by design features, dimensions and power, which are manifested under certain conditions. Furnaces intended for baths are installed not only in family therms, but also in commercial saunas that have a large area. If you compare with domestic brands, the described products are more compact in size, characterized by fuel economy and unique attractive design. Such equipment is used even for heating holiday homes, garages, hangars, small residential buildings, as well as absolutely any premises that have a small area.

Range of products

If you decide to purchase the oven "Termofor", you can prefer one of the colors on offer, namely: terracotta, anthracite, chocolate, which allows the most harmoniously fit the device in any interior. Due to the presence of elongated channels of the combustion chamber, it is possible to carry out a furnace from an adjacent room, thereby increasing the heated area. If you decide to buy a thermoform oven, then you should take into account that consumers most often choose those models that are equipped with doors made of heat-resistant glass. Such options are so in demand today for the reason that the equipment looks like a modern fireplace. The channel itself does not heat up, so if necessary, it can be carried through any wall.

Comments of consumers about the "Geyser" model

If you are considering the Termophor bath ovens, which you can read about below, then you need to take into account the fact that each model has its own characteristics. One of the consumers notes that he had a bath in the plot, in which a large brick oven is installed . It was decided to replace it due to a failure, installing the model "Geyser" in a therma, whose dimensions are 3 x 4 meters. The design was installed on the foundation of the old device, while the flue was put into the chimney. In this case, the room can be heated for 1 hour, and the walls of the niche retain the ability for a long time to effectively retain heat. With such an oven in the room will be more comfortable and spacious.

Reviews of the model "Angara"

Considering the sauna furnaces "Termofor", reviews about which you must certainly read before buying equipment, it is worth paying attention to the model, which is produced by the manufacturer called "Angara". Such a device, according to consumers, can last a long time. If there is a need to install a tank with a capacity of 50 liters, the water will not be very hot. In order to achieve a temperature in the stove within 80 degrees, you will have to heat for a long time. At the same time, a high temperature will be maintained in the steam room. The tank must be installed above the stove, then the water will be heated faster.

Customer feedback on the models "Kalina"

Bath furnaces "Termofor" have become quite popular among the modern buyer. If there is a need for a sufficiently powerful furnace, then the "Kalina" model should be preferred. It can be bricked, providing a gap of 100 millimeters. He will be able to keep heat for 6 or 8 hours in a row. Such equipment will be multifunctional, because in the steam room you can not only wash, but also dry clothes in the winter. This approach can be considered practical and economical.

Reviews about "Cinderella"

If you decide to buy a stove "Termofor" for the house, then an excellent solution will be a version called "Cinderella". The furnace of this equipment the master or the owner of the house can be taken to the kitchen, while the oven itself can be installed in the living room. As a fuel in the autumn period you can use dry, dry shoots of bushes, paper, as well as everything that burns well and does not involve the need for purchase. During the winter it will be necessary to use thicker firewood. Owners of suburban and private houses, the last of which are located within the city, believe that the model "Cinderella" is considered a fairly convenient option in operation. This solution has a low cost and a fairly compact size. The equipment is unpretentious in using fuel.

Additional consumer recommendations

The furnaces "Termofor", which you read about in the article, should be used for the intended purpose. For example, if there is a need for the arrangement of a commercial sauna, then it is not necessary to use equipment for a family bath. This is due to the fact that such a device is not suitable for round-the-clock operation, and also does not allow to get enough heat. The longevity of the device will depend on the operating mode. Experienced masters do not advise under any circumstances to make manipulations to shorten the flue. After all, if the length is insignificant, it will not be able to heat up to the required temperature, and condensate will be collected at the outlet, which is undesirable.

The most popular series of the brand "Termofor"

Wood furnaces "Termofor" brand "Geiser" can be attributed to the expert model class. Such equipment is intended for saunas and baths, which have an impressive area. The design has a two-level system, which provides for simultaneous heating of the room and obtaining a light, dry steam. The body has a funnel, where you can pour water if necessary. This will prevent drops from falling onto the surface of incandescent stones. As lovers of the sauna emphasize, this model perfectly suits for Russian steam room, as well as classical dry sauna.

If you decide to buy a stove for the bath "Termofor", reviews of which will be useful to read beforehand, then you can pay attention to the model "Angara", which is used for family steam rooms and commercial baths. In the latter case, it is necessary to pay attention to the fact that the 24-hour operation mode is not suitable for this device, since with this operation the equipment will quickly fail. The design has two chambers with a chimney, which allows maintaining a constant temperature at the required level.

The durability and unsurpassed reliability of the model are due to the robust housing, which is made of heat-resistant steel, and also cast cast-iron grate. If you are interested in the heating furnace "Termofor", then you should pay attention to the "Kalina" model. It is capable of heating 100 kg of stones in a short time. The design can be used in the role of a fireplace or a stove, which is equipped with a water tank. The volume of the latter can reach 70 liters. The design has a flue, which has a unique form of the labyrinth. Due to this, the room quickly heats up, which indicates the effectiveness.

Furnaces "Compact"

Furnaces on firewood "Termofor" of the "Compact" line belong to the economy class. This equipment has the most optimal ratio of quality and cost. Suitable devices for individual use. All varieties of this line are made using alloyed heat-resistant steel, in which there is a certain amount of chromium. This makes it possible to eliminate the occurrence of scale. The economical model creates quite comfortable conditions in the steam room. The dimensions of the latter can vary from 6 to 12 cubic meters.

Characteristics of the fire-battery furnace

Considering for his dacha home furnace "Thermophore", reviews are certainly recommended to read. The latest metalworking technologies, as well as computer design methods, made it possible to produce a truly unique furnace, which is called a fire-battery. The design is characterized by an impressive volume of firebox, the presence of a heat exchanger, a hob, and a water-heating tank of a remote type. Admittedly, the cooking surface is the most significant advantage in everyday life.

Main characteristics of some models

If you choose a thermoform oven for a home or a steam room, you need to consider the basic quality characteristics of some solutions. For example, "Geyser" is able to heat a room, the dimensions of which can vary from 8 to 18 cubic meters. At the same time, the mass of stones is 60 kilograms. In the process of exploitation it is possible to use firewood, the length of which reaches 450 millimeters. You can buy this model for a cost that starts from 16 000 and ends at 20 000 rubles.

"Angara" heats a room of the same volume, however, the volume of stones is less by 10 kilograms. The length of firewood is increased to 500 millimeters, and the cost starts from 10 000 and ends at around 20300 rubles. The "Compact" oven is purchased for smaller rooms, which are limited to 6-12 cubic meters. The mass of stones does not exceed 35 kg, and the cost varies from 7500 to 11,700 rubles. The "Kalina" stove can be purchased for premises with a minimum volume of 12, while the maximum is 30 cubic meters. It can contain 100 kilograms of stones, and the cost, perhaps, is the most impressive, it starts at 26500 rubles and ends at 30,000 rubles.

The "Cinderella" oven can be installed in rooms, the volume of which reaches 50 cubic meters. Its cost can be equal to the limit of 6200 to 7400 rubles. Fire-battery can be installed in a room that reaches 250 cubic meters. The minimum figure is 100 cubic meters. The cost of such equipment varies from 9400 to 17500 rubles.

Mounting Features

Bath furnaces "Termofor" must be installed according to a certain technology. It is important to consider the distance between flammable objects and the design of the furnace. It should be approximately 125 cm. If the device is located inside a wooden bath, it is necessary to additionally protect the walls using a heat-repellent screen. Its area should be larger than the area of the opening for inserting the furnace in 2 times. To mount the structure you need to use a base made of non-combustible materials, it can be a metal sheet or fireclay brick. The first should be covered with a heat-insulating foundation or tiles. The installation of the "Thermofor" furnace involves the provision of space between the wall of the bath and the external wall of the equipment. It should be 26 cm. On the floor in front of the door is laid heat insulation material, which is covered with a sheet of metal. If you want to install the structure in the right corner of the entrance doors, the door should open to the left.

Conclusion

The chimney is carefully insulated with a special material that is able to undergo the effects of high temperatures. This is required to prevent the accumulation of condensation. Moisture can bring a lot of trouble, and the material will be constantly exposed to aggressive effects, which can contribute to the destruction of structural elements. Therefore, the durability of the entire product depends on the correct installation. The first furnace furnace should be carried out in an open bath. This will quickly get rid of the smell of burning oil residues. These recommendations should definitely be taken into account if you want to enjoy the real steam in the first bathing procedures .