Motokosa "Calm": characteristics, reviews

To maintain the ideal order in the countryside site will be impossible without periodic mowing of lawns, shrubs, and weeds. It will be possible to help motocos "Shtil" in solving these problems. At the dacha it will be most convenient to use the gasoline model, since not every section has access to the electrical network, and the wires will not interfere with the operation. It remains only to decide which type of motorbike to choose, so that it was convenient in work and helped to mow young bushes, grass, weeds and woody shoots.

Selecting a model by engine

If you select a motokos "Calm", then you need, first of all, to pay attention to the engine. From its design features and power will depend on the quality of mowing and the duration of work. If before you is the task of mowing grass, it is best to prefer a model that has a single-cylinder two-stroke engine, the power of which can vary from 0.5 to 3.3 kW. In order to ensure uninterrupted operation of the engine, it is necessary to prepare a fuel mixture, which consists of AI-92 gasoline and oil designed for two-stroke engines. If you replace the brand of gasoline or a variety of oil, this can cause uneven operation and engine overheating.

The master should know that the mixture is prepared in an exact proportion, otherwise the motokosa will fail much earlier than the warranty period. Experts say that this engine assumes the presence of certain skills from the master, so inexperienced fans of country trips are best to buy a model that is equipped with a four-stroke engine. Such equipment can be used without preliminary preparation of a mixture, and gasoline and oil should be poured into separate containers. If the "Stil" motokos will have a four-stroke model of the engine, then you can count on a more impressive power, which guarantees the ability of the device to carve complex bushes, and also work in special areas. If you intend to use a motor cycle solely for caring for a lawn, then the mentioned capacity can turn out to be a lot. In this case, it is recommended to stop still on the two-stroke version of the motor, which has less weight and is cheaper.

Tool selection by working part

If you are in front of you at the point of sale of the motokos "Calm", then it is worth paying attention to the cutting part. This element depends on the capacity of the equipment. For example, low-power versions are most often equipped with a line or cord, as for more powerful varieties, they have a disk in the form of a cutter or metal knives.

When to choose a tool with a cutting cord

Motocos "Calm FS" can be equipped with a trimmer line, which can have a thickness in the range from 1.2 to 4 millimeters. In order to prevent premature wear of the bushes, each line must be selected with a line of a certain thickness. The cord can have a different cross-section, for example, square or polygonal, also round or figured. This diversity helps the master to choose the most suitable option for the site. The most universal solution today is the line, which has a circular cross-section. With her help, you can cut dry plants or green grass. Using the square cross-section of the line, it is possible to cut thick and lignified plants like a raspberry. The line with a section in the form of an asterisk helps to care for lawns, since it has the most sparing regimen. After such care, the grass is restored more quickly than after using the round cord.

Tool selection with trimmer knife

Motocos "Calm 55" can have approximate knives. Such variants of the tool are suitable for those owners of suburban areas, which are very rare at the dacha and are engaged in the care of the territory 2 times a season. If mowing tall grass with a fishing line, this can cause it to wind on the spindle. If you decide to prefer knives, then you need to choose between a plastic and a metal version of them. The first option helps to destroy hard plants and dry nettles, as well as burdock.

However, with a strong shrubby growth, it is preferable to fight with a metal tool. Stony areas should not be treated with tools that are equipped with knives, otherwise you may encounter a problem of return recoil, which is unsafe for the master. Motokosa "Calm FS 55" should be chosen according to the number of blade blades. As practice shows, with an increase in the number of teeth, it is better to cope with heavy areas. If you intend to harvest hay, it is best to abandon knives that have three or four denticles, since they will unnecessarily crush the grass.

Reviews about the structure of the rod

If you are considering the motocycles "Calm", reviews about which can be read in the article, it is important to pay attention also to the structure of the rod, which acts as a conductor connecting the cutting system with the engine. Inside this element is a shaft, which can be flexible or straight. This affects the shape of the bar, which can be curved or straight. The second option, according to users, is more durable and reliable, but if the territory has many hard-to-reach places and heights, it is best to buy a model that is equipped with a curved bar. Experienced users argue that it is important to pay attention to whether the bar is collapsible. If such an option is present, then the equipment can easily be folded for long-term storage.

Feedback on the comfort of use

Despite the fact that the "Stil 38" motokosa is very convenient to work with and helps to cope with the care of the territory, such works may seem rather complicated. Therefore, it is necessary to choose the equipment taking into account the possibility of easing the load on the hands. The master will not only have to hold the instrument in his hands, but also try to cut the grass as accurately as possible. If you add to the equipment an impressive weight, then for the summer resident the process of lawn care can respond with pain in the back and hands. In order to distribute the load evenly on the whole body, in motorbikes the manufacturers provide for the presence of belt rigging. You need to know how to choose a motocos to solve problems in the cottage area with this adaptation.

Motokosa "Calm 55", reviews of which are often only only positive, can have a strap that is worn on one shoulder. This option will be cheaper than the rest, but the load will fall exclusively on one half of the body. This can cause pain in the shoulder. Users argue that the most appropriate option will be double belts, which assume the presence of shoulder pads made of soft material. To ensure protection from vibration of the tool in the tooling kit must include a special lining on the hips. Experts advise choosing transom suspension, which can distribute the load throughout the body evenly. However, it is worthwhile to be prepared for the fact that such equipment is the most expensive, but also the most effective. Adjust this addition to the motor can be any shape, so there is the opportunity to make an ideal fit for yourself.

Characteristics of motor-bike brand FS 100 4-MIX

This equipment is produced as semi-professional, the volume of the engine is 31.4 cm. The power is equivalent to 1.4 hp. Inside the two-stroke engine is installed, and the handle is in the form of the letter T. The bar is straight, and the diameter of the line is 2.4 millimeters. The set comes with a two-edged cutting blade that perfectly copes with grass. In addition, you get a belt and safety glasses. The use of equipment is very convenient, since it has a negligible weight, which is 5.8 kilograms. For such equipment you will have to pay 33,700 rubles.

Characteristics of motor-saws of grade FS 38

If you want to save a little, you can buy this equipment, which costs 11,600 rubles, the engine's volume is 27.2 centimeters cubic, while the power is 0.9 hp. In the production process, a two-stroke engine is used, the tool is equipped with a D-shaped handle. The diameter of the line used is equivalent to 2 millimeters, a coil with a fishing line is supplied, as well as special safety glasses. The instrument weighs much less compared to the above, the mass is 3.9 kilograms.

Specifications motokasi brand FS 45

This tool is designed to solve household tasks, the volume of the engine is 30.2 centimeters cubic. Engine power is equivalent to 1 hp. Inside the two-stroke engine is installed, the equipment is equipped with a D-shaped handle. The set also comes with safety glasses and a coil with a fishing line. Weigh equipment 4 kilograms, and it will cost 15,600 rubles.

Conclusion

If you are in front of you at the Motorcycle Shop "Calm 130", then you should familiarize yourself with its quality characteristics, perhaps you do not need such a powerful equipment, for which you will have to pay much more than you expected.

In some cases, it is not worthwhile to purchase a tool designed to combat wild growths, since in this case it will not be possible to save. Quite often summer residents without understanding the quality characteristics, acquire equipment that is designed to solve more complex problems than required. In this case, to all other, the instrument weighs more than the ordinary, household, which is why it is inconvenient to work with it.