Folding table with own hands: drawings, design features and recommendations

Very convenient solution is a folding table, with its help you can change the place of dislocation of the feast, and also take the design for nature. Such a product does not take much space in the interior, because when you do not use it, the table can be folded and put outside the door.

Preparation of tools

A folding table by one's own hands can be made by any home craftsman, who once in his life dealt with wood. However, for carrying out this work, a certain set of tools and materials will be needed. It is necessary to prepare a screwdriver with a quick-action chuck and a set of bits, a grinding hand-held machine, a tape measure, a pencil, an electric jig saw, a construction level and a right angle.

If there is no grinding machine, then it is not necessary to purchase it for one time, it's best to use sandpaper, and you can finish the table making its surface smooth. Some modern stores offer consumers the use of such equipment for hire.

Preparation of materials

You can execute a folding table with your own hands in one evening, if you have all the necessary materials at hand. Two types of rails will be needed, one of them must have a section equal to 30 x 50 mm, while the other should have a cross section of 20 x 40 mm. In the first case, you need to prepare four elements, the length of each of which is 1200 millimeters. The total weight of the latter should be 5 meters.

For the production of table tops, you can use a glued array, which is made of pine. A reliable and durable option will be a table top, the thickness of which varies from 30 to 40 millimeters. A piece is cut from the workpiece with the following dimensions: 1300 x 650 millimeters. Each component is well treated with sandpaper, and then covered with varnish, which should be done before the time of assembly of the structure. Reiki, which will form the basis of the legs, should be rounded at the top, and then well ground.

Additional preparation of elements

The folding table with its own hands is executed according to the dimensions that will suit the future owner. But the technology remains the same as described in the article. Thus, in the legs, which are not cut to length, it is necessary to drill through holes, they will be needed for frame bars and axial bolts. Diameter under the fasteners should be 8 millimeters, and under the slats two holes should have a diameter of 5 millimeters.

In the central part of the bar, it is necessary to drill a hole for the axial bolts, retreating from above 430 millimeters. Frames are marked on the eye, but you should observe the symmetry.

Nuances of works

A folding table with its own hands is made using a certain technology, it involves the creation of goats and countertops, these components should not be fastened together. In the countertop you need to make grooves, where they will be installed, and after wedging the legs. Special nests must be made in such a way that their fixing to the table top is done by self-tapping 4 x 50 millimeters.

The next step is to proceed to assembly the structure. If you decide to make a folding table with your own hands, then the goats should look like a clamshell, this system will save space in the house or trunk of your car.

Initially, the legs should not be sawn off from below, but they should be approximately the same. Axial bolts also do not tighten to the end, so that the legs can be spread out. To secure the tolerance, you must use the locknuts. The master can purchase absolutely any bolts, however their length and diameter should be suitable. For the legs, for example, bolts 8 x 70 mm should be used. In the grooves of the countertops, you should apply the limiting bolts, the parameters of which are 8 x 120 millimeters.

Advice from a specialist

When a folding table for a picnic is built with your own hands, in the next step you can install the upper ends of the legs in the unfolded position in the grooves of the countertop. An unfinished design should be installed on any flat surface to determine how much to cut off the legs to eliminate the error in length. Be sure to use the building level. When adjusting the length, one should not be particularly zealous, for carrying out these manipulations you will need a jigsaw. If the table is to be used only in nature, then the generally accepted height of 750 millimeters should be reduced, since sitting behind such a construction will have to be literally on the ground.

Manufacture of a journal folding table

You can also make a folding coffee table with your own hands, his photos are presented in the article. The frame is assembled for confirmations, and a special drill must be used. The marking on the surface of the chipboard can be done with stickers, as the pencil is not visible, its lines are flashing. In the framework, which has the shape of a rectangle, you need to establish a transformation mechanism, but before that, springs are installed that help to unfold the structure. The mechanism is fixed through the way, because the weight of the table will be impressive.

Folding feet should hide all technical fixings and holes. Markings for fastenings can be done in the same way. Through holes for bolts should be prepared in the next stage, then the drill denotes the place for mounting the head of the bolt. This fastener will fix the mechanism, but do not be afraid of the fact that the number of fasteners is large enough. The legs have the form of a rectangle and should be as strong as possible, since the weight of the entire structure is approximately 45 kilograms. Between these components should be fixed screeds.

A folding table with your own hands, the drawings of which are presented in the article, can be performed by you in one evening. The next step will be screwing the legs to the structure itself, for this, the markings are first marked. You can drill in place if you have enough experience. Installation is recommended for metal bushings. For this fasteners, holes are drilled in the legs. To the four sides are installed legs, which will hide the technical holes in the frame.

Assembling the table top

The worktop must be assembled with special precision, since the hinged unfolding is strong enough and ensures smooth sliding of the elements. Keep the hinge in the nests hard enough, and screws with this task can not cope. Therefore, you can purchase other hinges. The worktop of such a construction is divided into two parts, first a small one is installed, then a large one. On this we can assume that the table is ready for operation.

Recommendations for the manufacture of universal construction

Folding table for a picnic with your own hands, the drawings of which are presented in the article, can be made to individual sizes. The design you can perform on the principle of a table-book, which has an attractive appearance. To do this, you need to prepare two legs, a king, a podstolie, 4 horizontal and two vertical bars, a movable leg and piano loops. All cuts must first be machined with an edge. After the central part is fastened. The next step is to assemble the countertop and fix the lid to the butt end of the legs. The mobile element with a frame is mounted on the piano loops, only after this the table can be assembled completely, and if necessary, varnished.

Conclusion

When the camp table is folded with your own hands or any other type of construction for eating, the particular difficulty lies in preparing the parts. Their cut is best entrusted to professionals, if you do not have special skills and tools. But the assembly each master will be able to do on his own.