Equipment for the Kot motor cultivator

Motocultivators series "Mole" are produced in our country for a very long time (since 1983) and have managed to prove themselves from the very best side. This remarkable technique has been successfully used for more than three decades for tillage by dacha farmers and farmers. There are many instruments suitable for the Mole motor cultivator. With the help of this technique, a variety of jobs can be produced in the garden or in the field.

Design features

The motor-cultivator is equipped with a two-stroke single-cylinder engine with a capacity of 2.6 liters. from. According to the manufacturer, this technique can be used on any soil. However, according to many summer residents, the engine does not have enough power to process clay soils. Heavy soil cultivator plows to insufficient depth (only 150 mm with 250 mm laid). In this regard, the manufacturer has developed several modifications, equipped with more powerful engines, mostly imported.

Four milling cutters are included in the Krot motor cultivator. When plowing, a strip of land with a width of 600 mm is seized, which makes it possible to work fairly quickly with good quality. If desired, the cultivator can also be used with six cutters. However, he can not work with eight. In this case, the masses of equipment simply do not stand the handle. In addition, the load on the gear and motor is greatly increased, which can lead to their failure.

Tillage with plows and plow

Plowing using this equipment can be done in two ways. Cutters to the Mower cultivator at work simultaneously serve as its propulsors. Cultivating the soil with their help is quite convenient, and most summer residents prefer this method. However, if you want, you can replace the cutters with wheels, and attach the plow to the cultivator. In this case, it is installed instead of the coulter. In order to make better plowing, experienced summer residents are advised to walk through the soil with a cultivator, loosening the top layer to a depth of 10 cm. In this case, the technique will not burrow into the ground because of the gravity of the reducer.

Polotniki to the cultivator "Mole"

With the help of this wonderful technique, you can not only plow the land, but also carry out weeding, say, potatoes. The manufacturer foresaw the possibility of using special polo-pins as attachments to the "Mole". These tools are L-shaped. With the help of "Mole" huge areas can be weeded in a matter of hours.

What else can I use?

The moto-cultivator "Krot-MK", among other things, can be used for hilling the potato. To do this, instead of a coulter, a special hiller is connected to it. It can be ordinary equipment, but it's best to use disk. Such hillers well raise even moist soil. And for a cultivator with a weak engine, which is "Mole", will be just an ideal option. It is also possible to install the mowing machine for batch production. Some summer residents use the "Mole" to transport cargo (the maximum permissible weight is 200 kg). At the same time, the TM-200 trolley is attached to it. Also with the help of this motor cultivator it is possible to produce watering (using the MNU-2 pumping unit).

Thus, the Mole cultivator (the spare parts to which, incidentally, it is quite easy to obtain, in contrast to imported equipment) - the design is quite convenient and multifunctional. Taking into account the fact that this equipment is not too expensive, it is definitely worth it to buy it for your summer cottage site. Especially if the soil on it is not too heavy.