Chassis KAMAZ 43253

The modern domestic car KAMAZ-43253 is relatively light. On its basis, onboard tractors are produced, which are popular and well-established. In this regard, the KAMAZ-43253 chassis continues to descend from the assembly line. They are able to modernize and carry out a large number of necessary works.

These unpretentious KAMAZ trucks are preferable to trucks of a higher class, with greater carrying capacity. This situation is explained by the fact that the model 43253 has a low fuel consumption, and, not least, the load on the axle is reduced, which reduces operational costs, and the car is quickly bought thanks to the economy.

KAMAZ-43253 is intended for installation on it of building lifts, fodder loaders, concrete mixers, dump trucks, truck cranes, etc. The weight of each of these superstructures should not be more than 8850 kg.

A new KAMAZ-43253 with a 740.31-240 engine is being manufactured, with a rated output of 240 liters. from. This power is more than enough to easily carry superstructures. The total mass of the car at the same time can reach up to 15.2 tons. And this is very little. However, such a small figure allows the chassis to maintain maneuverability, in addition, to develop speed on an even road more than 90 km / h. In this case, the outer turning radius is less than 10 m. In turn, the permissible angle of rotation is not more than 25 degrees.

Weights and parameters

The curb weight is 6200 kg.

Weight, equipped with a load on the front axle - 3900 kg.

The weight is full with the load on the front axle - 6000 kg.

Weight, equipped with a load on the rear axle - 2300 kg.

The weight is full with the load on the rear axle - 9200 kg.

Weight, permissible superstructure with a load - 8850 kg.

Full weight with superstructure - 15200 kg.

KAMAZ-43253 is equipped with an imported diesel engine Cummins, whose capacity is 210 liters. from. Wheel formula 4x2, and suspension type spring. Equipped with a car-chassis and a 10- speed manual gearbox . In addition, if desired, you can buy a restyling version, which has a gearbox ZF6. The power supply system is equipped with a tank of 250 liters capacity. However, if there is a need, the standard tank can be changed to a more spacious one, for example, up to 500 liters. In the chassis KAMAZ-43253 clutch fractional, dry type, two-disk. There is also a hydraulic clutch and pneumatic booster.

This car-chassis is very original in all its parameters. Because of its small dimensions, it is often used as a special equipment in a city. Modernization of the model 43253 does not require much effort, so the Kama plant, depending on the needs, produces many modifications. KAMAZ-43253 can become indispensable for small needs, as well as for the transportation of medium-heavy loads.

On the market, in the mid-price segment, KAMAZ-43253 occupies a leading position. He demonstrated his potential in various branches of the modern economy. For those who want to buy KAMAZ-43253, the price will be quite democratic. Given this, as well as the versatility and high level of technical parameters, this car will be a profitable investment of money for industrial and agricultural enterprises.