Blade for ATV - design features, materials of manufacture, manufacturers

With the onset of cold weather, the owners of suburban housing often have to clean the backyard of the snow to clear the paths, make entrances for transport. At the same time doing manual work or calling a snowplow is not the best option. Cope with the task yourself, saving time and effort, will allow a blade for the ATV.

Design

Structurally, the snow plow for the ATV is represented by the following units:

• ladle;
• Fasteners;
• Rotary mechanism.

To prevent deformation of the fastenings of motorized equipment and to avoid spoilage of the bucket, in addition, special special spring devices are often installed. Secure sensitive coatings on the site, which is to be cleaned, allows the edge of the blade to be equipped with a protective rubber band.

Materials of manufacture

Modern dumps for snow removal ATV are made of metal and plastic. The latter variant has a reduced weight, but it is considerably inferior in strength and, correspondingly, to the service life of metal models.

Steel dumps are made of sheet steel with thickness from 2 to 4 mm, and their dimensions are from 1200 mm in length and from 48 mm in height. The larger the metal blade for the ATV, the more the load is on the engine of the machinery.

Chinese heaps

Products of this category are available for a wide audience of consumers. Buy Chinese blade for the ATV today, you can for 11-17 thousand rubles. The cost here is formed depending on the parameters, configuration, functionality.

Among the obvious drawbacks of Chinese designs is worth noting:

• Sufficiently weak attachment of the bucket;
• No depreciation facilities that prevent the blade from breaking when contacting obstacles;
• Short service life;
• Low quality of painting.

Blade for ATV American production

Among American manufacturers of dumps for small-sized motorized machinery, whose products attract the attention of the consumer, Warn occupies a special place. The products of this brand are distinguished by high quality of assembly, thoughtful design, optimal parameters of width and height of snow-removing buckets, reliable system depreciation when hitting obstacles.

The disadvantage of Warn designs for domestic consumers is the high cost. The price for a snow dump for an ATV from an authoritative manufacturer today is about 32,000 rubles.

Blade of Russian production

Among the most optimal solutions in terms of price-quality should be allocated dumps for ATVs of the Russian manufacturer ATVSTAR. The cost for the set today is from 18 000 rubles.

Domestic dumps ATVSTAR have a thoughtful design and act as a budget analogue of American Warn products. Advantages of this solution:

• Optimal bucket parameters;
• Quality external coating;
• Reliable cushioning mechanism;
• The possibility of fine adjustment of the angle of rotation of the bucket;
• Quick installation and dismantling;
• Availability of a powerful snow-removing knife.

ATVSTAR dumps are invariably present on the domestic market for several years and do not cease to be in demand. Possessing almost the same consumer characteristics as the products of American production, the products of our manufacture are almost 2 times cheaper.

Finally

Is it rational to purchase an expensive factory design for snow removal, which is suitable for installation on small-sized machinery? Perhaps it's easier to find a drawing of a blade for an ATV and to assemble such a convenient tool yourself?

To give money for a dump or not is a private matter for everyone. But undermining your own health by removing the snow manually with a shovel is also not an option. Although there are many lovers of physical work in the open air. Whatever it was, users who have already managed to use a snow blast with an ATV rarely return to doing this work manually.