Warm floors "Electrolux": advantages and installation

As a rule, in the cold season in the room go in warm socks and slippers. This trend is maintained even where the temperature exceeds 20 degrees, because modern radiators can not provide full heating of the room. But progress on the spot is not worth it, and already today the use of the system of warm floors "Electrolux" allows you to forget about the cold floor in your room forever.

Warm floors of the new generation from Electrolux

Electrolux has been offering its customers innovative heating solutions based on heating cables for more than 10 years, occupying a leading position in the world market for warm floors for many years. Electrolux range for comfortable underfloor heating includes unique heating mats, cable sections, modern temperature controllers, as well as professional options for heating pipelines, anti-icing drains, roofs and platforms. According to reviews - this is the best warm floor.

Heating mats Electrolux

They are the fastest and easiest way to create a warm floor system, which is available even for non-professionals. For the installation of mats, it is not necessary to fill the concrete screed, you do not need to calculate the pitch and cable laying capacity, so you can install the heating mat in the room yourself by spreading the roll over its area. An electrician will only be needed to connect the system to the network. Electrolux heating mats are presented in two series:

1. A series of EASY FIX MAT - a self-adhesive heating mat based on a two-wire thin cable of 150 W / m., Firmly woven into a textile mesh, which is impregnated with a special adhesive compound. It fixes the mat on the floor and creates ideal conditions for adhesion with tile glue and concrete. Recommended for installation in tile adhesive without screed.
2. MULTI SIZE MAT - ultra-thin elastic heating mat. Its stretched unique design allows you to change the length of the mat, so you can vary the heated area and power of the mat, as well as lay it with a turn. Mounted under any floor covering, including wooden. Excellent for creating a heated surface that has irregular geometry (corner corridors and balconies, bathrooms and kitchens).

Heating sections "Electrolux"

Cable sections TWIN CABLE refer to the classic versions of the electric underfloor heating. They consist of a two-wire cable 17 W / m ² . Section - an ideal option for floors that have a non-standard complex configuration. They can be laid in tile glue, concrete or under a stone.

Thermoregulators "Electrolux"

The thermostat is the control unit of the warm floor. Its purpose is to control many functions and heating modes in the system. The range of Electrolux includes a temperature sensor of the warm floor with electronic, mechanical and sensory control.

Benefits

Warm floors "Electrolux" Have a number of advantages, the main ones of which are:

1. Rapid and uniform heating of the entire area in the room. Due to the fact that the heat flow is directed all over the area from the bottom up and the heat distribution occurs in the vertical direction, a natural sense of comfort is created.
2. Compared with such heat sources as radiators, stoves, convectors, fireplaces, "Electrolux" warm floors create much less drafts, convection currents, form less dust in the air.
3. In the system, the only visible element is the thermostat. Directly the very source of heat is hidden under the floor, which makes room for various interior and furniture items to be vacated.
4. Due to the fact that there is no direct contact of heating elements with the atmosphere, air is not dried out, and humidity in damp areas (bathrooms, hallways) is regulated.
5. Automatic maintenance of the set temperature. The heating mode is programmed, so that the power consumption can be reduced by 2 or more times.
6. Durability. The service life of the electric heating cable system is 50 years or more, and maintenance is not required.
7. The warm floors of "Electrolux" are resistant to heavy physical loads.

Installation

As practice has shown, the most optimal and affordable way to make your flooring warm is to use heating mats with a base of thin cords that are fixed on a self-adhesive basis. Their installation is very simple (no pouring of concrete screed is required), special skills or knowledge are not needed.

Before you begin laying the system, you should prepare a place where the temperature sensor of the warm floor will be installed. What needs to be done next is simply to deploy the mat and fix it. Then check the resistance of the cable and connect the thermostat "Electrolux". Then put this cover and enjoy the warm floor.

Common installation errors

Despite the fact that the installation process is very simple, and there are some problems. The main ones are:

• Hit nails in the heating cord;
• Incorrect connection in the contact thermoregulator.

If any problems arise during installation, it is recommended to contact any service center of the company.

How much is the floor?

Due to the high demand for warm floors, they can be purchased in almost all specialized stores, but to be sure of 100% in their purchase, it is best to stop the choice at those enterprises that have proven themselves only from a good side. How much is the floor? The minimum price is from 2290 rubles.