Artificial waterfalls in landscape design. Decorative waterfalls in the apartment with their own hands

It is known that water (like fire) is fascinating. You can watch for hours how it flows. Psychologists are sure that such a pattern affects a person soothingly, favorably affects the nervous system.

Since ancient times, artificial waterfalls have been built in the parks and gardens of well-to-do people. Today they are also customary to create in private country houses, in suburban areas. Many are wondering whether it is possible to make such an ornament in the cottage or in the garden with their own hands.

Where to make a waterfall

The waterfall looks best surrounded by trees and flowers. Suitable slopes, small hills. The size of the pond in which water should flow, its depth depends only on your desire and the area of the site. If you are not going to breed fish or plants in it, then it can be shallow.

Design a contour of the future pond on the ground, and you can start digging a pit. To waterfall was more natural, the channel should be given a meandering shape. To strengthen the pond and waterproofing, you will need natural stones of different sizes, a mixture and a primer for waterproofing, fiberglass, a pump, sand with cement. On how well the insulation is made, the life of your building will depend.

Fill the bottom of the excavation with glass fiber or sand with a layer of 4 mm. On top of it is laid waterproofing, then a layer of cement. It is placed on stones and other elements of the waterfall. After this, the designs dry well.

Pump for waterfall

Artificial waterfalls can not be created without a pumping system. Its power depends on the height of the structure. Than your waterfall is higher, the more powerful the device you will need. It is desirable to install a mechanism with the function of adjusting the flow of water. The pump must feed it to the top of the structure. It is desirable that the system is hidden under the rocks.

Decor

Artificial waterfalls will be the brightest decoration of any territory, therefore the site on which your structure is located should be very picturesque.

Registration is the most pleasant stage of work, because you can show your imagination. You can use to decorate stones, alpine plants, ready-made scenery for the garden. Do not be superfluous gravel and pebbles. Now you know how to make an artificial waterfall with your own hands. In fact, this is not difficult. The main thing is to show imagination and to approach the process creatively.

Artificial waterfall in the apartment

Perhaps someone will be surprised by this design decision, but today it is not uncommon. Many owners of spacious apartments can afford such a pleasure. We have not in vain stressed the word "spacious". A small artificial waterfall will not decorate an apartment. Therefore, having made the decision to create a waterfall in the apartment, arrange it in the largest room.

Waterfalls "on the glass"

This is their most common form. Such artificial waterfalls look very exquisite and airy. In such designs, the stream flows along a perfectly flat glass surface. This waterfall will be appropriate even in a small room. Often it is used to divide a room into functional areas.

To raise the water to a height of two meters, you will need a maximum pump power of 30 watts.

To such a waterfall was visible in the dark, it is decorated with a special highlight. This creates a special, unique atmosphere in the room.

The back wall can be designed in the form of an aquarium, a landscape, etc. For this you can use wallpaper.

Inkjet Falls

Such designs are used not only in residential buildings, but also in office buildings. In this case, the trickles of water do not create a splash due to a special technology, in which they are at a distance from each other.

Artificial waterfall with own hands

First of all you will need a small pool (suitable for you in size). It will require polystyrene fine structure, special fabric and epoxy resins with hardener.

We begin to make artificial stones. We cut the sheets of foam (preferably, they were thick) into fragments of different sizes. Do not strive to do it very smoothly. The more crooked are the sections, the more natural the structure will be.

Each foam plastic "stone" must also be treated with a knife. They need to make depressions, cracks, nadkols.

Now all the received "stones" should be densely wrapped in fiberglass, the ends of which can be fastened with staples of a construction stapler. Surplus surplus. It is worth noting that, creating artificial waterfalls with their own hands, you need to show accuracy and patience. From how carefully you prepare all the elements, the overall look of the structure will depend.

Now all the "stones" must be treated with epoxy resin, pre-mixing it with the hardener. Thoroughly paint them from all sides. Make sure that the fabric is well soaked.

When the "stones" are completely dry, start building a "rock". Put them in random order according to what fantasy tells you, and glue them together with epoxy.

Ready-made structure paint with paint from a can. At the top make a small unnoticeable hole, from which the water will drain. It can be decorated with seashells. Pull the hose from the pool up to the hole. At the bottom it must be connected to the pump. It is desirable that it was noiseless, as for an aquarium. Outside, enclose the pool with artificial stone.

We are sure that you will be satisfied with your creation.

Artificial waterfalls (photo you can see in our article) will give your site or apartment a special color and originality, and created by your own hands will be doubly pleasant.