Speaker Specifications

Acoustic systems differ in the number of supported channels. Depending on the type of device, the model parameters change. The main parameters of acoustic systems include the maximum frequency, power, input resistance, and conductivity.

Device parameters are affected by structural elements. The standard speaker system includes speakers, a subwoofer, a wired amplifier and a crossover. In order to understand this question in more detail, we need to consider specific models.

Razer Ferox 2013 System Options

The main characteristics of the acoustic system Razer Ferox 2013 pleasantly pleased music lovers. The power of the column is 4W. The system of protection against phase oscillations in this case is available. The amplifier is of a transient type. Crossover in the model is designed for three channels.

If you believe the feedback of experts, the frequency of the model is quite high. Of the features of the acoustic system, it is important to note the quality switched core. The parameter of limiting conductivity he raises strongly. The system from the isolation of extraneous noise is. The input voltage for acoustics is 40 ohms.

Acoustic systems 10 Mas : characteristics, photo

This speaker system has the following characteristics: power limit 5.5 W, frequency 30 Hz, nominal impedance 40 dB. The sensitivity in the device is insignificant. Crossover in the model is used with an adapter. The wave tube is not provided for acoustics. If you believe the feedback of experts, then the sensitivity to change is quite simple. The subwoofer in this model is used with a terminal amplifier. The parameter of the output voltage at it is equal to 13 V. The system from phase jamming in the model is.

The horn is used with two contacts. To suppress unwanted noise, a filter is used. Sound stabilization system is provided in the first class. The fatigue rate in this case does not exceed 80%. The system of protection from linear distortion is not provided. The bass reflex for the presented system is absent. The audio frequency is a maximum of 250 Hz.

Audiofocus EVO 12A System Description

First and foremost, it is important to note that these are active speakers. Specifications Audiofocus EVO 12A is quite high. The power of the column is 6 watts. The electric power consumption parameter of the model is at the level of 2 W. The diffuser is used with two transition filters. If you believe the feedback of experts, then problems with power reduction are rare. The phase-jamming protection system is used in the first class.

The input impedance parameter reaches a maximum of 67 ohms. The threshold impedance in the device is negligible. The sensitivity of the speaker is 5 mV. The system of protection from linear distortion in the presented acoustics is absent. The conductivity of the signal is at a level of 6 microns. The amplifier in this case is used openly. To adjust the volume there is a rotary controller.

Trust Ebos C 90 System Settings

The speaker system C 90 has the following characteristics: the minimum frequency is 20 Hz, the power is 30 W, the input resistance is 45 Ohm. The speaker in the device is used with a sensitivity of up to 3 mV. If you believe the feedback of experts, then problems with power reduction are observed infrequently. The wave tube is used with an adapter. In total, the model has two resistors.

The bass reflex port is used as a wired type. The parameter of the limiting impedance is exactly 60 dB. The system against linear distortion is used in the second class. The crossover is provided with a conductivity of 6 microns. For more detailed specifications of the C90 speakers, refer to the instructions.

Characteristics of model 25АС-З28

Electronics 25АС-З28 - acoustic system. The device's characteristics impress many music lovers. First of all, it is important to note that the speakers are used with a power of 50 watts. The parameter of the input resistance is 30 ohms. The system of protection against linear distortion is provided for the third degree. If you believe the reviews of experts, then with the threshold conductivity of the model is all right.

The phase-inverter in this case is made with a coaxial output. The system for phase-noise protection is not provided. The limit impedance parameter is 78 dB. The sensitivity of the wave tube is 3 microns. The emitter is used in the PP20 series. Problems with reducing the power of this system are not terrible. In total, the device can support no more than three channels.

Description of the system Defender Orchestra M80

This speaker system has the following characteristics: power 40 W, input resistance 34 Ohm, and limiting impedance 89 dB. The bass reflex port is used with an output voltage of 13 watts. The system of protection from linear distortion is applied in the second class. There is no shout at this system. Directly, the filter is of a wave type.

The threshold conductivity parameter is 3.4 μm. The speakers are used in a diameter of 12 cm. There is no coaxial output at the diffuser. The amplifier produces a maximum of 10 V. The phase-jamming protection system is applied in the third class. The sound frequency is at least 13 Hz. These are the main characteristics of the acoustic systems Defender Orchestra M80.

System parameters Defender Orchestra M85

Frequency characteristics of acoustic systems Defender Orchestra M85 are at a high level. The speakers are used with a power of 30 watts. The phase distortion protection system is standardly used in the second class. If you believe the feedback of buyers, then problems with power reduction are observed rarely.

Bass reflex is installed with one adapter. The limiting sensitivity of it is 3 mV. The system of protection against linear distortion is applied in the third class. The audio frequency is a maximum of 350 Hz. The threshold impedance of the speaker system does not exceed 60 dB. The core has a reducibility of 5.5 μ.

Characteristics of the model Defender Orchestra M86

This speaker system has the following characteristics: power 50 W, power consumption 3 V, conductivity 4.5 m. Fazoinvertor is used with a seal. Problems with extraneous noise are rare. The sound frequency is at least 30 Hz.

The system of protection from linear distortion is. The parameter of the threshold impedance is 60 dB. The wave tube is used with an amplifier. The speaker is used in the size of 10.3 cm. The emitter has a high conductivity signal. The input resistance of the system is 34 ohms. In total, the model supports no more than two channels.

Description of the system Aspiring HitBox 100

Speaker characteristics Aspiring HitBox 100 pleasantly surprise many users. The speakers in the device are set to 20 watts. The system of protection from linear distortion is provided in the first class. The conductivity of the phase-inverter is 3.3 microns. There is no seal in this case. If you believe the feedback of experts, the phase interference of this model is not terrible. The wave tube of the speaker system is used with an adapter.

The limiting frequency of the device is 340 Hz. The emitter is used with a low conductivity signal. The input resistance of the modification is 45 ohms. The threshold impedance is exactly 30 dB. The minimum frequency of the model is at the level of 12 Hz. The indicator of electricity consumption in the modification is low. The limiting horizontal dispersion is 30 degrees. The crossover is missing from the model.

System parameters Aspiring HitBox 200

This speaker has the following parameters: power 25 W, power consumption 3 V, input impedance exactly 45 Ohm. The emitter is used without a wave tube. The sealant in the device is made of rubber. The speakers are used in a diameter of 13 cm.

The limiting frequency of acoustics is 350 Hz. The limiting horizontal dispersion is 40 degrees. Problems with reducing the power of this system are not terrible. The minimum audio frequency is at 30 Hz. The threshold impedance of the modification is 73 dB. In total, the device supports no more than five channels. The system of protection from linear distortions is applied to the third degree.

Model specifications Aspiring HitBox 340

The characteristics of Aspiring HitBox 340 speakers are at a high level. The power parameter is 50 W. If you believe the feedback of experts, the problems with overheating of the sealant are rare. The limiting horizontal impedance is 45 degrees. The system of protection against phase distortions is applied to the third degree. The bass reflex port is used for three adapters.

The output conductivity parameter does not exceed 4.6 microns. The speakers are used in a diameter of 14 cm. The output under the receiver is available for the model. There is a coaxial connector on the bass reflex port. If you believe the feedback of buyers, then the system uses a high-quality subwoofer. Crossover in this case is provided without an amplifier. The output frequency is at least 13 Hz. The system of protection from linear distortion is applied first class. The threshold impedance is 86 dB.

The vibration isolation layer is located under the bass reflex. The wave tube is applied with a horn. The limit sensitivity is 2.2 mV. The maximum audio frequency is at 450 Hz. The core for the bass reflex is not provided for in the model.