Scheme of laying a stove with a stove for a house or cottage. Brick oven with stove and oven with own hands

If you need to heat a country house or your own home, you can build a brick kiln that will perform two functions at once. One of them is the heating of the room, and the second is the opportunity to cook food on such equipment. The latter will be possible to implement in the event that you equip the oven with an oven. Before you start, you should consider the scheme of laying the stove with a stove, which will eliminate errors.

Features of building a stove with an oven

Before starting work, a scheme for laying the stove with a stove should be prepared. The design will include an oven, a burner and a hob. In order to ensure maximum compactness, you need to install an isolated oven on the side of the furnace. The plate will be located on top of the combustion chamber, as well as an oven, it will overlap the brick row.

If the oven is isolated, this will greatly facilitate not only the operation, but also the maintenance, since it will be possible to cook in the oven almost immediately, without waiting for the firewood to burn. This distinguishes this design from the Russian furnace.

Recommendations for construction

You should consider the scheme of laying the stove with a stove, but it must also be remembered that before the construction of the structure it is necessary to ensure its efficiency, which will depend on the configuration of the chimney. In order to increase heat transfer, a more complex system of vertically oriented channels should be used, through which hot gases move, giving their heat to the walls of bricks. At the same time, the air in the room will be heated slowly and continuously.

If you need a stove with a stove, then you can build it yourself, using a ready-made scheme. However, a beginner should not only study the drawings, but also get acquainted with the basic rules for stowage of stove equipment. It is important to know how the foundation is poured, the material is selected, the mortar is closed, and the chimney is built.

Features of erection of the furnace with a water box

If you need a stove with this type of stove, you should expect that its heat output will reach 600 kcal / h. This is true if we heat the structure 2 times a day. Dimensions of equipment should be equal to 102h64h7 cm. As the main feature of the model is the availability of water-heating boxes.

Preparatory work

To produce the construction, you will need to prepare a red brick in the amount of 140 pieces. Also, about 50 liters of solution, which has the characteristics of heat resistance, will be needed for the work. With the same set of material, a Russian stove with a stove can also be made. It will also require a pre-combustion sheet, it should be made of roofing steel, from which it is necessary to cut out a piece of 50x70 cm. The same material prepares a canvas that will fit under the plate, the size of this element is 115x64 cm.

The construction of the furnace will be impossible without a steel corner, which is used for tying, it needs to be prepared in quantity of 8 pieces. The stove with the stove will not function properly without the presence of a grate, a door, and a gate valve. The first of them should have dimensions of 25x18 cm. Among other things, you need to buy a cast-iron plate, the size of which is 53x90 cm. The water-heating box must correspond to the size 35x35x45 cm, and the oven should be equivalent to the following dimensions - 35x35x45 cm.

Features of stove installation

Before starting the process, you should consider the scheme of laying the stove with a stove. The first two starting rows must be laid with a continuous masonry, while the third must be a place to lay the brush. In the next row, the door is installed. The hot water box, as well as the oven, are stacked in the sixth row.

In order to form two channels between the side elements of the oven, as well as in the box, the product must be placed on the edge. On the next row, you need to install the grate. Russian stove with a stove has the same technology of erection. But when building it is important to remember that the firebox must necessarily be protected with fireclay bricks, and the lining should be 2 cm above the oven. On the eleventh row, it is necessary to make the overlapping of the hot-water box. The plate should be mounted on a frame made of metal corners.

Features of work on the "Swede"

If you need a stove with a stove, then you can choose the design of "Swede", which acts as the most preferred option. This device combines compactness and efficiency in one housing. This oven with an oven and a stove is simply built. In such a model, the oven must be installed in such a way that it blocks the way to hot gases that escape from the furnace. This design can improve the heating of the hob, which acts as a roof of the furnace heating. To carry out work on the furnace you need to prepare some materials and tools.

Preparatory work

The stove with the stove described above should be laid using red ceramic brick, which must be prepared in an amount of 570 pieces. Useful and refractory masonry mortar, which must be ordered in the amount of 200 kilograms. It is important to stock up with metal corners, as well as stripes. When a stove with an oven and a stove is made, roofing iron, as well as a flat slate, which is necessary for closing the cooking chamber, will come in handy as in the above-described case. It will take a grate, a cast-iron stove, and an oven.

The peculiarity of the model is that the left-hand burner will become more heated, while the right-hand one will have a lower temperature. This must be taken into account when choosing the cooking method. A stove with a stove can be made with your own hands quite simply. The main thing is to be attentive and purposeful.