Is engraving possible at home? What will be required to perform this procedure?

With the help of engraving, almost any object can be made unique. It should also be noted that the products with inscriptions or images printed on them will be great gifts.

The popularity of engraving in the modern world

Many people try to make inscriptions on the products, which will remind of the events that have occurred. It is very popular to apply them to gold and silver ornaments. An excellent example is the wedding rings and family relics.

Engraving metal, made with your own hands, makes it possible to apply a variety of inscriptions and images on the surface. In addition, glass and plastic objects can be used for work. You can apply the required image by using a laser, an engraver or a stylus.

What is needed to apply an image to a surface?

Engraving at home on a metal, glass or plastic surface can be done with a sharp object. The most common tool designed for these purposes is the engraver. It should be understood that all products that are necessary for engraving are produced by a variety of organizations. At the moment, you can find such models of engraver as stand-alone and electric.

For engraving, you can also use a borax. They will cope perfectly with any type of surface. Boers can have different forms. To produce this type of tools, various materials are also used. In addition, the borax is necessary for performing different jobs. Diamond tools are considered to be high-strength tools of this type. If you are a lover of engraving, then in your arsenal must be present borax from metal and glass.

The technology of drawing an image on any surface of the house

To engrave at home did not cause any special complications, you need to know the technology of applying images. It is as follows:

1. It is necessary to polish and polish that side of the sheet of brass, which is facial.
2. It is necessary to degrease the selected surface using a tampon and gasoline or acetone. You can also use a brush. But it must first be moistened in a solution that contains soda or detergent. After the degreasing procedure has been completed, leave the leaf alone for a while. Do not touch it with your hands. Otherwise, traces will remain on the surface.
3. The selected sheet will need to be sunk. To do this, use a solution that contains sodium sulfate and water. The more saturated the solution, the denser the toning will be. When processing is completed, the surface of the brass sheet will become darker. The entire process can be accelerated by heating the workpiece. After darkening the surface, rinse thoroughly with warm water. It is required to do this in order to get rid of the reagent residues. Then it is necessary to dry the processed element.
4. You can start drawing an image or an inscription. To do this, it is first necessary to apply contours. The smallest elements should be applied directly in the engraving process. Using a sharp needle, it is necessary to outline the contours of the image on the pebble. After that, it must be removed. Insert the boron on the metal into the tip and circle the contours that were applied earlier. To ensure that engraving in the home is not disappointing, you need to be careful. Therefore, it is necessary to practice beforehand on any metal plate. The hand should be moved easily, as if holding a pencil and drawing on a simple sheet of paper.

After the contours are finally applied, only the smaller elements will remain. When engraving at home will be done, you need to cover the sheet with a layer of varnish or wax.

What are the main ways of drawing images?

Laser engraving is the most common way of drawing an image on any surface. Especially often it is used in the case of glass processing. The pattern can be applied to the surface by using the latest equipment. Engraving is fast. But it can not be called simple, since special equipment is required. In this regard, laser engraving in the home, although it can be done, but with great difficulty.

It is also worth noting that this type of imaging is dangerous to human health. Care must be taken to prevent physical contact with the laser. In this regard, it should be noted another method of engraving, which is less dangerous. We are talking about the use of special chemical compounds.

This method of engraving, in addition to security, is also distinguished by the fact that it can create three-dimensional images on the surface of a part, which can not be achieved by using a laser.

Summarize

We were convinced that even with our own hands it is possible to put an image on an object. You can perform, for example, engraving a knife. At home, this is done, as can be seen from the review, is not so difficult. The main thing is not to hurry and go to this process thoroughly.