Sandbox with your hands with a lid. Simple children's sandbox

A sandbox with its own hands and a lid can be performed in several stages. The first of them suggests the correct placement. This indicates the need to place a place for games where the children will be easy to observe. This will ensure safety. Among other things, the sandbox must meet hygiene requirements. In this case, do not have a place for games under the trees, as they will become a source of falling leaves and bird droppings. However, it is necessary to take care of and protect against sunlight. Children, among other things, should be comfortable to use your design. It is important to take into account the number of children who will use the sandbox.

Features of building a sandbox

The sandbox with its own hands with a lid, as a rule, is made according to certain rules, which are prescribed by standard norms. Thus, it is preferable to choose wood as the material for the reason that it acts as the most environmentally friendly material. The shape is preferable to make a square, the side can be equal to 2.5-3 m. To bring sand is important in moderation. It will need about 2 m³. If you want to perform a standard sandbox, then it is preferable to use pine boards that have a thickness of 25-30 mm.

The sandbox with its own hands with a lid must be made according to safety rules, this indicates that all the details must be carefully processed. If it is supposed to make a standard design, then it will be necessary to allocate on the territory of the site an area of a square shape with a side equal to 2 m.

Preparation before work starts

In the example, the sandbox will be considered with its own hands with a square cover with a side equal to 1.7 m. This will save space in the garden, and for three kids this will be enough. Initially, it is required to mark the site for installation of the structure, it will be quite simple. To carry out this kind of work, it is necessary to prepare four pegs and a certain amount of twine, and a roulette is useful. The site must be carefully prepared in advance. For what by means of pegs and a rope it is necessary to mark out the perimeter of the future design, which will allow to dig a pit inside the fence. Its depth should be equal to 25 cm. It is not worth getting rid of the fertile layer of soil that was left after excavation , it will be useful in other parts of the territory. As a result, you should get a pad, the dimensions of which are equal to 170 x 170 x 25 cm.

Work on the bottom of the sandbox

When a sandbox is made with its own hands with a lid, the pit can serve as a pit, but in this case it will not be possible in future to avoid problems that are expressed in frequent contamination of the sand. This, in turn, will assume the need for its frequent replacement. It is for this reason that you need to think in advance how to make the sandbox clean. If the base is made as dense as possible, this will prevent mixing of soil and sand. Thus, in order to solve this problem, it is necessary to first align the bottom of the pit, and then lay the preparation of sand. Do not make a layer, the thickness of which is more than 5 cm. The sand must be carefully compacted, and then covered with a special material.

Alternative base variant

After the dimensions of the sandbox are determined, and the pit is excavated, you can think about what will be the basis. The above described option can be replaced with paving slab, however, much less force will be spent with sand, and the effect will be the same. Sand can be covered with geotextile or agrofibre. It is not necessary to use polyethylene for this, since after the first sediments the structure will have to be removed in order to rid the base of accumulated moisture. But geotextile perfectly copes with the task set before it. This material will let through the moisture, which will go to the ground. But from moles and insects the sandbox will be protected well. If you still decide to use the film, then you need to make holes in it. To do this, you can use and plywood, which must also be previously made holes.

Sandbox Making Process

Before you make a sandbox with a cover, you need to prepare bars with dimensions equal to 450 x 50 x 50 mm. They have to be mounted at the corners of the structure. It must be remembered that part of the wooden element will be in the ground by 15 cm, this indicates the need for processing the surface of the bar with an antiseptic. You can use bitumen for protection. Bars need to be driven into the ground in the corners of the sandbox. For each side of the installation it is necessary to make a shield made of pine boards. Its width should be 30 cm, while the thickness - 2.5 cm. For which it is permissible to use one wide or narrow boards - this is not so important. However, do not neglect the need for surface treatment of shields, so there should not be knots, chips, or jags on them. On this we can assume that the sandbox from the tree is almost ready. It remains only to make for her skirts.

Manufacturing of skirting boards and other additions

Four boards are to be laid along the perimeter of the structure. Each of them should be pre-stripped and checked for a lack of chipping. Bortics can be used in the role of seats. You can supplement the installation with a lid. This will prevent rain from getting on the sand, the last of which will not be blown by the wind. In addition, for a while, until the construction is used, it will be protected from getting debris. In addition, small animals will not be able to get into the sandbox space.

Before building a sandbox, you need to consider whether it will have a lid. The latter, if necessary, should be made from a wooden shield, which is fixed on several boards on bars. His adults will have to lift and clean before using the design of the children. However, the child can not do this, which is why the lid can be equipped with a door, which must consist of two parts. For it, you need to make 2 shields, fixing them on the hinges. If the doors are equipped with handles, then even a child can open them.

The drawing of the sandbox must be prepared before the work starts, this will avoid many mistakes. The lid, by the way, can be replaced with a tent or polyethylene dense film. For a while, until you are present at the dacha, the canopy can be fastened with a good rubber band or bricks.

Making a canopy

Above the sandbox is preferable to place a canopy or fungus. When carrying out the work on the manufacture of such a supplement, it is necessary to use all the same wood. Thus, the foot of the fungus can be made from a bar with a size of 100 x 100 mm. It is necessary to use an element whose length is 3 m. It should be taken into account that the leg should be driven into the ground by 1.5 m or more, only in this way it will be possible to achieve the stability of the fungus. Do not forget that the leg must necessarily be treated with an antiseptic. For the hat of the fungus in advance to produce triangles of boards. From the inside, they need to be nailed to the leg, whereas outside the fungus should be sheathed using thin plywood.

If you used the recommended sandbox size, then for the fungus cap you can use a width that is equal to 2.5 m, this will be quite enough for playing children.

Choice of filling for a sandbox

Drawing of the sandbox can be prepared independently or use the one that is given in the article. As a rule, for children's buildings of this type, river sand is chosen. This is due to the fact that it is considered to be the cleanest of all the rest and does not have any foreign impurities or has, but in the most insignificant amount. You can replace it with the one purchased in the building materials market, this option is more expensive, but it may be more preferable. Thus, quartz sand is also suitable, this master should be borne in mind. However, whatever sand you choose, it must first be sifted. Sandbox with a cover "Sunflower" can be filled with special sand, which is designed for children's games. It allows you to sculpt the figures well, because there is some clay in it. In addition, in this material there are special fragrances that repel unwanted visitors - dogs and cats.

Recommendations of a specialist

The boards must be treated with a planer, and then sanded with sandpaper. After the cantilever is mounted in the corners, the lower tier, which consists of planks, can be fixed to it with screw screws. It is necessary to take care that steel hats do not stick out. The cover can also be non-removable, but simply opened in canopies. Loops for this purpose are fixed with screws.

Surface treatment

A sandbox scheme with a cover will make the work properly. Until the latch elements are fixed, the frame must be painted. Nitro-paint is the most successful solution, it must be applied in two layers. Folded on the bottom of agglomerates can be strengthened to the sides with a stapler. If you do all the work on the recommendations, then the design will be durable, it will not have to be repaired during operation or replaced some of the constituent parts. It is important to use only high-quality materials for the work, since in many ways the life span of the installation depends on them. It is important to be able to work with wood so that the child does not get splintered during the game.