How quickly and with a minimum of costs to make a closet compartment with their own hands?

I think no one in the modern world can imagine his living room or bedroom without the presence of a closet in it. Moreover, at present special use is made of the cabinets of the compartment. In stores you can be offered a huge assortment of types and colors of this furniture accessories, but quite often the cabinet is quite expensive. That is why, I think it is necessary to explain how you can make the closet compartment with your own hands. It's quite simple and not so expensive as buying a new wardrobe in a furniture store.

In order to make the closet cabinet with our own hands, we need the following things: a modern electric jig saw, a universal machine, a screwdriver or a screwdriver, a transparent ruler of 1 meter long, a tape measure, a small level and a set of liquid nails.

Now that all the parts and devices have been prepared to make the wardrobe of the compartment with our own hands, we have prepared holes in the wall, and the doors are assembled, we can proceed directly to assembling and installing the new cabinet in our own place.

At the beginning of the installation it is necessary to measure the intended place where you are going to mount the new compartment cabinet. All the necessary dimensions and calculations must be transferred schematically to a white sheet of paper. So you get a sketch of mounting the closet cabinet that you made yourself. Built-in cabinets of the coupe with their own hands made can easily be put and without preparation, if in your location there are several hands. Well, my article is devoted to teaching how to collect the closet compartment with your own hands on the prepared place by the forces of one person. Now we describe the basic principle of assembling the cabinets of the compartment.

The basic plan of the assembly.

1. For beginners, it is necessary to sort all the parts in the order they are fixed to the cabinet during assembly. It is best to start from the far side, since it will be easier for you to distribute all the details after the weight load, and you can avoid possible installation problems. After that, you need to put the main bottom of the carrier section and press it with the back end to the wall, where the compartment cupboard will be made by hand. Then you can screw the left and right sidewalls. We move the side of the cabinet to the wall and press it, fasten it to the fixing bolts.

Thus, the wall not only gives emphasis, but also carries over the entire weight of the future design, so it will be easier to keep the sidewall in balance. Immediately after installation, it is necessary to fasten one forward confirmation to the lowest connection of the structure. Now the sidewall of our structure will stand securely and it can no longer be held. We fix the remaining two confirmations and proceed to the next stage.

2. Further gradually, in accordance with the first point, we increase the sidewalls according to the manufactured scheme. At the initial stage of fabrication and assembly of the structure, several sidewalls for communication can not be fastened directly in the plane, but simply fixed with one confirmation, while ensuring stability and reliability of further assembly of the cabinet.

3. After all the right and left sidewall sections of the compartment of the compartment have been installed, it is necessary to screw the roof of our construction, and all the connections to the horizon and fix all the confirmations with liquid nails.

4. All the assembled sections can now be pushed out and then nailed to the back wall with a fiberboard. After that, you can install the closet compartment with your hands on the place prepared at the very beginning.

Thus, to install and make a closet with your own hands is not so difficult, as it seems at first glance. But for all works, you must strictly adhere to the above plan. All the assembly and production of the necessary parts required me about 3-4 days for 5-6 hours of free time.