Homeliness, Repairs
Profile mounting mats for underfloor heating
Everyone wants to have a warm and cozy home. With the help of a heating system alone, this is difficult to do. It is necessary to make so that legs and legs are heated also. For this you can build a special warm floor. However, it must be properly designed and assembled. This will help you mats for the warm water floor.
What is the product?
Naturally, such materials must meet the established international standards. Without this, they will be ineffective. For example, mats for a warm water floor must be resistant to mechanical stress, withstand high temperatures. At the same time, the quality thing should be easy to use, provide low thermal conductivity. For example, mats for the warm water floor "Energoflex" are considered a good option. They not only function well, but they also have a relatively low cost (250-690 rubles).
Benefits
- Good sound and thermal insulation. Especially it concerns products with ledges.
- Easy to use and install. Try to buy mats with special locks. They themselves center the webs and ensure their reliable cohesion.
- Resistance to moisture.
- Little weight.
- Resistance to rotting, corrosion and rodent damage.
- Fire safety. This is a very important property, as it includes not only the safety of your home, but also your financial security (there is no fire - no damage).
- Low cost.
These advantages make mats for underfloor heating in demand.
Varieties of products
1. Expanded polystyrene. A special feature of this material is good sound insulation, the ability to withstand a huge temperature range (-180 to +180 degrees). However, in this case you will have to buy additional pipe fasteners. The presented products have an even structure, without fixing elements. Such mats for a warm water floor can be foil. This makes them very efficient in terms of heat transfer.
2. Polystyrene. Such products are rather thin and have an invoice structure. That is, on their surface there are special protrusions that fix the pipes. Due to the high density of the material presented, it can withstand a sufficiently large weight of the structure. The fastening will be of high quality and reliable.
They can also be foldable or roll. There are also laminated and non-laminated versions. In the first case, additional steam insulation is not required. Mats for a warm water floor are an essential element of the heating system.
Features of product selection
- Quality. It depends on the manufacturer. During the selection, carefully inspect the mats for scratches or other damage.
- A type. Here everything depends on the personal preferences of the buyer. However, it is best to buy an expanded polystyrene variant for apartments, as it provides good sound insulation.
- The size of the pipe. If you pay attention to a special profile mate, then this parameter must be taken into account necessarily.
- The cost of the product. Despite the fact that prices are almost always acceptable, do not buy the cheapest option.
- Life time. It must be specified in the guarantee. Try to buy exactly the material that you do not need to change after a few years of operation.
- The size of the room. In principle, this factor is fundamental. Wrong mats are money to the wind. You can use them, however you will either have to purchase the material, or you will get a lot of waste.
Features of preparation of a floor
Before laying the mats, you will also need to make a surface markup. Also for work you will need to prepare all the necessary tools: scissors (for roll material), special glue (it is needed to fix the products), silicone agent for sealing joints.
Mounting Features
1. Substrate preparation.
2. Floor marking.
3. Laying of canvases. There is nothing complicated. However, if your mats are additionally insulated, then pay great attention to the ends of the products. They should fit well. If you do not want to bother with such canvases, it is better to choose sheets that are equipped with special connecting locks. Thanks to them you can forget about the seams and their sealing.
4. Installation of pipes. Note that they will need to be placed at the same distance from each other. This will ensure the uniformity of heating the entire area. Thanks to products with special protrusions, this is much easier. The profile mat for the warm water floor should provide heat up, so at this stage it can be additionally equipped with a reflector (foil).
Helpful Tips
Thanks to them you can make your heating system as efficient as possible:
1. For mounting it is better to use those models that have high strength.
2. To ensure that the heat is reflected well, and also to protect the pipes from moisture, it is possible to fix a special polymer film on the mats. Please note that it must be sufficiently dense.
3. If there is a basement under your floor, then it must be insulated. In this case, almost any material is used: mineral wool, expanded polystyrene or another. Naturally, before laying it, the foundation must be leveled. For this, a screed is made.
4. Note that if the contours of pipes are different, then they must be formed into separate sections. A damper band is used to separate them.
After all the work is done, you can start checking the heating system. If there are any shortcomings, they are immediately eliminated. If they do not exist, a final finish can be made.
The right choice and styling of the presented materials will provide you with cosiness, warmth and economy of money. Good luck!
Similar articles
Trending Now