HomelinessTools and equipment

Plastic mounting wedges: technical specifications

Recently, mounting wedges have become quite common. They are convenient for aligning and wedging of building systems and elements. Without them, the installation of doors and windows in the opening is almost impossible, which is very convenient, but not yet very common among private masters.

Main characteristics

If you decide to use mounting wedges in work , it will be important to know that they have different sizes, which allows you to balance the building elements with great accuracy. The master must remember that the alignment accuracy is ensured by the teeth, which are located on two sides of the wedge. The distance between them is 0.5 mm. Mounting wedges have air chambers and provide a sufficiently tight fit, which eliminates the problem of freezing in the winter season. They are capable of increasing the bond area by a factor of 2.

Positive features of wedges

In addition to the fact that the use of such products significantly increases the area of adhesion, you can be sure that the sliding on the surface will be completely absent. You can not be afraid of the lack of opening, this manufacturer guarantees the characteristic, because the products are made to exact dimensions. You can count on the reliability of products, which remains unchanged even at critical temperatures (their range varies from -40 to +80 degrees). Wedges plastic mounting can last for a long time, they are resistant to all kinds of negative environmental influences. In operation wedges have internal chambers that exclude the occurrence of cold bridges, which may appear when wooden pads are used in construction.

Installation Recommendations

Before using the wedges of plastic mounting, it is important to familiarize yourself with the technology of their application. These products are mounted while fixing the window unit to the wall openings with the help of fasteners. To install the side pads must be as tight as possible, but no force should be exerted on the profile of the box. Dimensions and pitch should be chosen depending on the design of the product to be installed. Wedges plastic mounting, the dimensions of which will be described below, must move until the part is at the desired level. Mounting products must be installed along the window unit. After fixing of the mounted product, it will be necessary to get rid of the seam by the method of sealing, in the process, a construction foam or vapor barrier tape can be used .

What else is necessary to know the master about the assembly products

Plastic mounting wedges, whose manufacturer guarantees excellent performance, have an unlimited lifespan. Products are not able to absorb moisture, which prolongs the life of materials that are in close proximity to products. The teeth will not need to be dismantled after installation . This is very attractive for professional builders and home masters. On sale it is always possible to meet a huge assortment of products that may be required for carrying out various kinds of installation work. Wedges plastic assembly, the manufacturer of which says that you can count on the reduction of construction work, do not assume the need for a preparatory stage. Thus, the installation time is reduced by 4 times. Such figures are due to the fact that when using wooden pads, the master would have to prepare them in advance.

Features of using wedges

When you apply wedges during installation work, you can expect a more accurate alignment of the structure in the opening, this is achieved by changing the height of the product by only one tooth, its parameter limited to a factor of 0.5 millimeters.

Cameras of similar products correspond to the heat conductivity indices that are characteristic of the window. This indicates that the thermal conductivity of the installed product remains unchanged. Due to the fact that the wedges have a significant width, the products completely exclude slipping of the frame's framing profile. Mounting wedges for windows have equal angles, this allows them to be used in an odd number. During installation, these products can be covered with construction foam, which improves the quality of the window's heat-saving, and also stops rotting processes for many decades. The technology of wedges allows to exclude claims that can be related to human factors when installing doors or windows.

Varieties of mounting products

What you need to know before you buy plastic wedges? Characteristics of this product. So, on sale it is possible to meet small wedges which, as a rule, are used at installation of windows without dismantle. This applies to cottages and new buildings. Among other things, such products can be used for the installation of parquet or laminate. Accuracy of alignment is provided by special teeth, the distance between which is 0.5 millimeters. If you want to purchase them, you can count on the average market value, which varies within 3-5 rubles per unit of goods.

Wedges of medium size

The mounting wedge, the technical characteristics of which are presented in this article, can have an average size. The largest load per one support block is 1,700 kg, which is true at 100% intersection. Most often, these products are used when installing windows, as well as floors. In the latter case, we are talking about equalizing the lags. With their help can be made and roofing works, as well as the installation of doors. The alignment accuracy is guaranteed by the same teeth, which are located on two sides of the wedge, the distance between them is equal to 0.5 millimeters. Air chambers and good fit in this case also have a place to be. You can buy these products at a price that varies at the level of 4.5 rubles.

Wedges of large size

The above-described lag wedges are medium in size, while large assembly products can be found on the market. The greatest load per one support block is 2200 kilograms, which is true when crossing at 100 percent. Most often, these wedges are used when installing windows that have a fairly complex configuration. This is due to the fact that in these cases, high accuracy is required, when the window is dismantled, it is impossible to guarantee this in the opening area. This concerns, for example, the buildings of Stalin's time. These products are also used when installing floors, as for leveling the logs. You can meet them when carrying out roofing works, as well as installing doors. The alignment accuracy is ensured by the same teeth, located at the same frequency. Buy such wedges in the building materials market can be within 7.5 rubles. For 1 unit. As for the manufacturer, the most popular products are the companies Firmax, Bauset, KlinPlast.

Additional characteristics of wedges with different sizes

In the case of small products, their length, width, and height are 91, 43 and 15 millimeters, respectively. If you need to calculate how many packages you will need to purchase for work, you need to consider that one package contains 700 items. When it comes to medium wedges, it is important to take into account that their length, width and height are 115, 30 and 19 millimeters, respectively. When purchasing such products, consider that one package contains 600 items. Large wedges have a length, width and height, which are equal to 143, 43 and 22 millimeters, respectively. In one package there will be 200 pieces.

Advantages of plastic wedges in front of wooden

If you can not decide before the installation work, which wedges to choose - based on wood or plastic, it is important to weigh all the positive and negative sides of each of these materials. First of all, it is necessary to note the moment that wooden wedges by you will be manufactured by yourself, which can not guarantee obtaining exact dimensions, as in the case of plastic supports that are manufactured in the plant.

It is important to take into account also the fact that wedges made of plastic have an excellent bearing capacity, which does not change with time, because the products are based on high-strength material. This can not be said about wood, which eventually loses its original moisture, dries up and changes its linear dimensions. Plastic, unlike wood, does not rot. It is water resistant and frost-resistant. If the wood gets wet, it will cause its subsequent drying. Use plastic wedges can be without any limitation in terms of operation. On this indicator, plastic also wins in front of the tree.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.