If a wooden bed creaks, what should I do?

Whatever the quality of the wooden bed, sooner or later it will start to creak when driving, interfering with sleep and rest and just nervous. With all the remaining comfort of the bed, such a palpable minus as creak, will become an excuse for deteriorating the quality of sleep, and hence, human health. At the same time, changing this bed to a new one is not the most economically viable solution. In most cases, it is a question of fixing furniture and eliminating the appeared auditory stimulus if a wooden bed creaks. How can I fix this so that I can continue to use my favorite bed for many more years?

Causes of Scripting Bed

Get rid of the creaking is possible and not being a specialist in furniture. However, if a wooden bed creaks, you can solve the problem only after first understanding, because of what furniture produces these unpleasant sounds.

Most likely, this is due to the natural process of drying out the natural material - wood. No less frequent reason may be that the fastening elements of the bed parts are weakening with time.

But you should exclude the sound that can come from the old mattress, since in this case it turns out that this is not a wooden bed creaking. What can I do to understand if the mattress is to blame for this? It simply needs to be removed and put on the floor, after which to lie down and move. If there is no squeak, then you need to continue researching all parts of the bed: racks or boards under the mattress, all docking sites, without exception, and frames and legs. Once the location or locations of the defect are detected, you can begin to act in accordance with what exactly is the cause of the creaking.

Loose fasteners

The weakening of the fasteners is the most frequent reason for the appearance of an unpleasant sound, since all materials without exception have a wear characteristic, and in time, one detail begins to tread and touch the other more densely than was provided for in the design. In addition, from the movement and weight acting on the parts, the fixing density can also be weakened. In such cases, it is sufficient to tighten all nuts and bolts.

But it happens that from time to time they are no longer able to withstand the load themselves, and the wooden bed creaks. What to do in such cases? It is necessary to put additional fasteners. For example, special corners of wood or metal, which should be screwed on the other side of the furniture. Instead of corners or in addition to them, you can strengthen all joints with joinery glue.

Having tightened, having strengthened and allowing to dry with glue, it is possible to check up, whether the creak has disappeared. If it remains, you need to use one of the types of lubricant, which covers the joints of the bed to eliminate the friction of all the wooden parts of the frame. You can use a special silicone grease, solidol, paraffin and even ordinary soap. To produce these works must be carefully and very carefully, since the risk of damage to the upper protective and decorative layer of wood is high.

Gluing joints

A very good proven method of eliminating bed creak is the use of rubber glue, which needs to seal the holes that cause the bed to creak. The glue remains flexible enough to hold the filled space securely. Use this method by following the instructions:

1. Disassemble the bed into the smallest possible part to assess the degree of wear.
2. Degrease all joints with any alcohol, allow it to evaporate.
3. Carefully apply rubber glue to each of the prepared parts.
4. Immediately after drawing back we collect and make a wooden bed and, placing it in the usual place, we wait for complete drying of the glue, in accordance with the recommendations on the package.

After that, the script should not remain. The only drawback of the method described is that the adhesive between the elements will not allow you to easily disassemble the bed in the future.

Reiki

Those very racks, on which the mattress is located, is no less popular reason why it happens that a wooden bed creaks. What to do in this case? Eliminate the problem by replacing old defective rods with new ones or trying to change old racks in places.

Feet

It happens that the reason for the creaking lies in the legs of the furniture. This defect is the most difficult task for home repair. Legs, of course, can be replaced by others, but their installation can be quite a difficult matter even for professionals. But just remove the legs, for example by cutting them, you can without special skills and tools. In addition, instead of a bored classic bed, as a result, you can get a new trendy and original element of the interior - a platform for sleeping and relaxing, standing right on the floor.

Visual change of the situation, stability and elimination of the creaking in this way can be achieved simultaneously. Of course, this decision does not suit everyone, but you can still consider it. How to know, maybe in someone close will wake up the talent of the designer of premises, and the bed-platform will become the most favorite piece of furniture in the house.

What else can I do if the wooden bed creaks

What should people do to whom these methods did not help? From the creaking you can get rid of and not resorting to radical measures, if you try to apply the following cunning solutions:

1. A thick pillow, laid between the wall and the back of the bed as an additional cushioning support, markedly reduces the strength of the skip.
2. A small layer of any dense material between the frame and the grid or the slats of the bed.
3. Special covers, put on the legs of furniture.
4. Checking the position of the mattress (the rider can make noise).

Thus, after discovering the reason for the creaking and knowing what to do if the bed creaks, you can stop this annoying misunderstanding and use your favorite furniture without extra costs for a long time.