Ideas for restoring furniture yourself: photo. Restoration of old furniture

Restoration of furniture with their own hands is an excellent opportunity to prolong the life of any interior items, to make them a bright and colorful designer decor. These processes can be complex and not very. It all depends on what you are going to change. It should be understood that such a process as the restoration of furniture with their own hands, the idea of implementing which are diverse, is also somewhat laborious.

Why is this happening

Unfortunately, furniture often breaks down, and the reasons can be different. These include their close proximity to heating appliances, insufficient moisture, old age, transportation, the appearance of insects.

Each of these problems has a causal relationship. You need to understand that if you do not want to throw out your favorite interior items and buy new ones, then you can give priority to restoring furniture yourself.

Any broken object should be immediately repaired. Slowness in this case can lead to the fact that the object is so worn that it will not be until the restoration of furniture. It will be impossible to do anything with your own hands.

Stripped veneer

Very often furniture is glued with veneer, which is made from valuable wood. Such a simple operation makes the interior objects interesting, prolongs their life, preventing the formation of cracks and the appearance of insects. Unfortunately, it also happens that the veneer exfoliates.

The reasons for this can be excessive moisture and dampness, which leads to a swelling of the material, the formation of cracks and its peeling. You can fix this.

How to fix

Initially, you need to try ironing the veneer with a hot iron. It is necessary to lay a paper sheet so as not to spoil the material itself. The procedure may not always yield results.

If the visible effect is not achieved, it is necessary to make the file on the veneer. For its edge the material rises and the substrate is greased with glue. With the help of the press, the glue is held until drying takes place. Remains of it are removed with a knife or a sharp cycle.

To bleach the seam, use a solution of oxalic acid. Its treatment on top of a colorless varnish will help to prolong the effect of the result. Thanks to the restoration of furniture with their own hands, you can extend the life of the furniture and make the appearance aesthetically attractive.

Other problems with veneer

Restoration of furniture with their own hands (photo rights demonstrates the result) may be needed if the veneer was deposited to the ground or moved along the edge. The last problem is solved by gluing a piece of the glue that is damaged and its lapping. In order not to damage the lacquer coating, the lapping agent is advised to wrap in a flannel.

If the veneer is deposited to the base, then the damaged part is glued and rubbed. After that, it is necessary to putty and make a tint. The final step is to coat the surface with varnish.

Polished Furniture

Restoration of polished furniture with your own hands is an affordable process for everyone. Most often, the need for it arises in cases where defects occur at the ends and corners. They can be represented by scratches or bevels.

Restoration of furniture with their own hands means its putty and primer. Podmazku made from glue and wood flour. The latter ingredient is often replaced with pumice, talc or powdered chalk.

The second possible option is the restoration of furniture with their own hands with rosin flooring, which includes a special mixture, white zinc and flour. To not spoil a piece of furniture, you can use the pigment colors of your furniture. It is used after it is heated, and the sealing of the slots is carried out by sealing wax, the color of which should be selected in advance.

Get rid of scratches

The appearance of a scratch on the varnished coating is an ordinary occurrence. The problem is solved quite simply if you have information about how the varnish is covered with furniture. In this case, it will be easy enough to treat it with a solvent.

If the furniture is covered with polish or an alcohol-based varnish, you can use ethyl alcohol. Nitro-lacquer coating is treated with ordinary acetone or solvents 647, КР-36 and 646.

Defects on nitrocellulose and polyester varnish are easily removed using sandpaper. After treatment, the surface is smeared with polishing paste and varnished.

Potholes and chips

Restoration of furniture with their own hands, a photo of which can be found in the article, may be needed to correct potholes and chips. Putty is used for this purpose. It is prepared from wood flour, talc or chalk, in which glue and pigment dye are added. The material is applied to the damaged surface and allowed to dry for several days. After complete drying, grinding and surface coating with varnish are carried out.

Another option is to restore the furniture yourself with the help of liquid putty. It is applied to the required area, and the tracing paper is placed on top. Using the iron, the required shape is given. Plus is the lack of the need to grind the surface. It's enough just to get rid of tracing paper.

Old furniture

Restoration of old furniture with their own hands will give a lot of positive emotions and new sensations. If you want to completely change its appearance, you can use sheets of plywood. They perfectly hide the ugly sides of the table or cabinet. If desired, you can give preference and putty. However, if the furniture is really old, then it will not always be effective.

If there is a need to replace the countertop itself, you can repaint it in a different color. First you need to sand the surface to get rid of the old pigment, possible scratches and cracks, dirt and ink. After grinding, you can start painting yourself. Restoration of old furniture with their own hands will be a good occupation, and the result will look spectacular in any interior.

The replacement of the handles also refers to the restoration. Usually this procedure does not cause any difficulty. It is enough to choose those models that harmoniously fit into the design of the model. The surface under them can be sanded and varnished.

Cushioned furniture

Restoration of upholstered furniture with their own hands - the opportunity to breathe life into your favorite interiors. Changing the upholstery is a fairly simple process. It is enough to remove the old extremely carefully so as not to damage it. We will use it as a template for sewing new upholstery.

Also, you should get rid of the possible fixing elements, for example, buttons and staples. You can do this with pliers. To remove, it is enough to cut one of the seams with ordinary scissors.

Gradually removing the fabric, mark the place with a marker, so that later you can not mistake which part is taken from. If desired, you can polish the legs and other visible details.

Upholstered furniture is covered with a batting, gently bending the material and fastening with staples. On the old upholstery we make patterns and cut out a new one. It is important to choose a fabric that will last a long time. Fastening of the fabric is carried out by staples.

Restoration of Soviet furniture with their own hands can be carried out by sewing capes on chairs or sofas. This will eliminate the lengthy process of creating new upholstery and will present new interior motifs.

Decoupage

If you are going to carry out such a process as restoring furniture yourself, decoupage will be a great way. It will help to update literally any piece of furniture.

You will need materials such as lacquer, glue, ruler, scissors, paper with drawings or napkins, a brush and, of course, furniture itself. Excellent looking kitchen interior items, decorated in the technique of decoupage.

Restoration of kitchen furniture with their own hands is a fairly simple process. In practice, there is no need. It is advisable to grind the varnished surfaces. This will ensure a good fastening with paper, which means it will eliminate the possibility of creases and bubbles.

It is best to take pictures of a square shape. They are smeared and pasted gradually. You can make a whole picture by gluing the edge to the edge, or you can create a collage or an application.

On the edge of the table, the paper is overlapped. If the edges are rounded, it is worth making cuts to make the pattern flattened, if even - there is no need for this.

After the paper is impregnated with glue, it is necessary to level it. To do this, press it firmly against the furniture. Then the material should dry completely.

Once the glue has dried, you can apply varnish layers that will act as a fixer. Apply them at least two. After each application, leave them to dry.

If you seriously like the technique of decoupage, you can acquire professional attributes and create from your own old furniture these masterpieces.

Repair of worn parts

It is very important to repair furniture at a time when you notice any defect. Waiting can lead to negative consequences. One of the problems is loose connection of parts. To fix this is quite simple. It will be useful glue and cleaning. Initially, clean the part from the old glue and lubricate the fresh one. It is necessary to squeeze firmly or secure the structure so that the glue clings to the part. For these purposes, you can use a crochet, twine or heavy objects that are placed on top.

If even after the new sizing, the cracks remain, so they should be driven into wooden wedges, greased with glue. Small slots are easily eliminated using a putty or cloth impregnated with glue.

Threads

In stools, there is often a breakdown of the thread in the place of attachment of the leg. Eliminate this with a nut with identical threads. Initially, the end is worn, only two protrusions remain intact. In the holes with the ripped thread, we make the cuts so that the tabs of the nut enter them. After the nut is inserted and fixed, it remains only to screw the leg back.

Loose chairs

Loose chairs and stools are the eternal problems of most people. In fact, it will not be difficult to solve them. It is enough to drill small holes in the legs, and make them through through the struts. Screws are screwed in them until the legs with struts are tightened.

Falling down the door

Another common problem is the fallen doors. This is explained by the fact that the screws on the walls are not sufficiently twisted. If you can not solve the problem with ordinary twisting, you can gently enlarge the hole. It fits a wooden cork with glue. In this design, the screw is screwed in, which will now hold tight.

Insects

In old furniture bugs-grinders are sometimes planted. You can find out about their appearance by the presence of small round holes. In this case, you should inspect the structure from the inside. If the assumption is true, it is necessary to solve the problem urgently. By the way, a characteristic sign of their presence is the "ticking" sound that these insects emit.

It is important to start solving the problem instantly, otherwise nothing will be left of the furniture, except for the rubbish. While the damage caused by insects is insignificant, there is a hope to fix everything. To do this, it is necessary to fill the syringe with petrolatum oil and process the design from the inside. At the top, the holes are clogged with wax or paraffin. A common putty is also suitable for these purposes. The procedure should be repeated after 2-3 weeks.

If your furniture is badly damaged by insects, then there is no point in repairing it. It can disintegrate at any time. The optimal solution will be the purchase of a new one, which will add charm and refinement to the interior.